Textile floor coverings - Guidelines for acceptable colour deviations

CEN/TS 16641:2014 gives guidance in case of complaints when a colour deviation is observed after installation of a textile floor covering by the installer and/or end user. The colour deviation can be observed within different parts of the installation or between the installed textile floor covering and the initially presented sample on which the choice for ordering was made.

Textile Bodenbeläge - Richtlinien für akzeptablen Farbabweichungen

Das vorliegende Dokument gibt für den Beschwerdefall eine Anleitung, wenn der Fußbodenleger und/oder der Endverbraucher nach dem Verlegen des textilen Bodenbelags eine Farbänderung beobachtet.
Die Farbänderung kann innerhalb verschiedener Teile der Verlegarbeit oder zwischen dem verlegten textilen Bodenbelag und dem zu Beginn vorgelegten Muster beobachtet werden, auf dessen Grundlage die Auswahl für die Bestellung erfolgte.

Revêtements de sol textiles - Lignes directrices pour les écarts de couleur acceptables

Le présent document fournit des recommandations concernant les réclamations formulées lorsqu'un écart de couleur est observé après la pose d'un revêtement de sol textile, par l'entreprise de pose et/ou par l'utilisateur final.
L'écart de couleur peut être observé en différentes parties du revêtement posé, ou entre le revêtement de sol textile posé et l'échantillon présenté initialement à partir duquel le choix a été fait pour effectuer la commande.

Tekstilne talne obloge - Smernice za sprejemljiva barvna odstopanja

Standard CEN/TS 16641:2014 podaja smernice v pritožbenih primerih, kadar namestitelj in/ali končni uporabnik po namestitvi tekstilnih talnih oblog opazi vidno barvno odstopanje. Barvno odstopanje je mogoče opaziti na različnih nameščenih delih med vgrajenimi tekstilnimi talnimi oblogami in začetnim vzorcem, na podlagi katerega je bilo opravljeno naročilo.

General Information

Status
Withdrawn
Publication Date
06-May-2014
Withdrawal Date
12-Nov-2019
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
13-Nov-2019
Due Date
06-Dec-2019
Completion Date
13-Nov-2019

Relations

Buy Standard

Technical specification
TS CEN/TS 16641:2014
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 16641:2014
01-junij-2014
Tekstilne talne obloge - Smernice za sprejemljiva barvna odstopanja
Textile floor coverings - Guidelines for acceptable colour deviations
Textile Bodenbeläge - Richtlinien für akzeptablen Farbabweichungen
Revêtements de sol textiles - Lignes directrices pour les écarts de couleur acceptables
Ta slovenski standard je istoveten z: CEN/TS 16641:2014
ICS:
59.080.60 Tekstilne talne obloge Textile floor coverings
SIST-TS CEN/TS 16641:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 16641:2014

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 16641:2014

TECHNICAL SPECIFICATION
CEN/TS 16641

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
March 2014
ICS 59.080.60
English Version
Textile floor coverings - Guidelines for acceptable colour
deviations
Revêtements de sol textiles - Lignes directrices pour les Textile Bodenbeläge - Leitlinien für akzeptable
écarts de couleur acceptables Farbabweichungen
This Technical Specification (CEN/TS) was approved by CEN on 26 November 2013 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16641:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 16641:2014
CEN/TS 16641:2014 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 General information on colour deviation and initial requirements .4
4.1 Carpet manufacturing .4
4.2 Installation .4
5 Assessment of colour deviation .4
6 Requirements for acceptance .5
7 Report .5

2

---------------------- Page: 4 ----------------------

SIST-TS CEN/TS 16641:2014
CEN/TS 16641:2014 (E)
Foreword
This document (CEN/TS 16641:2014) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile and laminate floor coverings”, the secretariat of which is held by NBN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST-TS CEN/TS 16641:2014
CEN/TS 16641:2014 (E)
1 Scope
This Technical Specification gives guidance in case of complaints when a colour deviation is observed after
installation of a tex
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.