SIST EN 2328:2009

Aerospace series - Washers, tab in corrosion resisting steel, cadmium plated for flight control rods - Dimensions

This standard specifies the characteristics of tab washers for flight control rods.
These tab washers are intended to immobilise the rod end in relation to the rod body, whilst allowing a positional adjustment of 1/2 a turn.

Luft- und Raumfahrt - Sicherungsbleche aus korrosionsbeständigem Stahl, verkadmet, für Bediengestänge von Flugsteuerungen - Maße

Diese Norm legt die Eigenschaften von Sicherungsbleche für Bediengestänge von Flugsteuerungen fest.
Diese Sicherungsbleche dienen dazu, den Stangenkopf gegenüber dem Rohrkörper zu arretieren, um gleichzeitig eine Lageeinstellung auf eine halbe Umdrehung genau zu ermöglichen.

Série aérospatiale - Freins d'écrous en acier résistant à la corrosion cadmiés, pour bielles de commandes de vol - Dimensions

Aeronavtika - Podložke z zavihkom, iz korozijsko odpornega jekla, s kadmijevo prevleko, za kontrolne palice pri krmiljenju - Mere

General Information

• Status: Published
• Publication Date: 12-Mar-2009
• ICS: 49.030.50 - Washers and other locking elements
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 14-Jan-2009
• Due Date: 21-Mar-2009
• Completion Date: 13-Mar-2009
• Ref Project: EN 2328:2006 - Aerospace series - Washers, tab in corrosion resisting steel, cadmium plated for flight control rods - Dimensions

Relations

• Replaces: SIST EN 2328:2001 - Aerospace series - Washers, tab for flight control rods - Dimensions
• Effective Date: 01-Apr-2009
• Replaces: SIST EN 2328:2001/AC1:2001 - Aerospace series - Washers, tab for flight control rods - Dimensions
• Effective Date: 01-Apr-2009

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Podložke z zavihkom, iz korozijsko odpornega jekla, s kadmijevo prevleko, za kontrolne palice pri krmiljenju - MereLuft- und Raumfahrt - Sicherungsbleche aus korrosionsbeständigem Stahl, verkadmet, für Bediengestänge von Flugsteuerungen - MaßeSérie aérospatiale - Freins d'écrous en acier résistant à la corrosion cadmiés, pour bielles de commandes de vol - DimensionsAerospace series - Washers, tab in corrosion resisting steel, cadmium plated for flight control rods - Dimensions49.030.50Podložke in drugi blokirni elementiWashers and other locking elementsICS:Ta slovenski standard je istoveten z:EN 2328:2006SIST EN 2328:2009en,de01-april-2009SIST EN 2328:2009SLOVENSKI
STANDARDSIST EN 2328:2001/AC1:2001SIST EN 2328:20011DGRPHãþD



SIST EN 2328:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2328May 2006ICS 49.030.50Supersedes EN 2328:1988
English VersionAerospace series - Washers, tab in corrosion resisting steel,cadmium plated for flight control rods - DimensionsSérie aérospatiale - Freins d'écrous en acier résistant à lacorrosion cadmiés, pour bielles de commandes de vol -DimensionsLuft- und Raumfahrt - Sicherungsbleche auskorrosionsbeständigem Stahl, verkadmet fürBediengestänge von Flugsteuerungen - MaßeThis European Standard was approved by CEN on 26 October 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2328:2006: ESIST EN 2328:2009



EN 2328:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Required characteristics.4 4 Designation.6 5 Marking.6 6 Qualification.6
SIST EN 232
...