iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 28927-1:2010/A1:2017

(Amendment)

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders - Amendment 1: Cupped wire brushes (ISO 28927-1:2009/Amd 1:2017)

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders - Amendment 1: Cupped wire brushes (ISO 28927-1:2009/Amd 1:2017)

Handgehaltene motorbetriebene Maschinen - Messverfahren zur Ermittlung der Schwingungsemission - Teil 1: Winkelschleifer und Vertikalschleifer - Änderung 1:(ISO 28927-1:2009/Amd 1:2017)

Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de vibrations - Partie 1: Meuleuses verticales et meuleuses d'angles - Amendement 1: (ISO 28927-1:2009/Amd 1:2017)

Ročna prenosna električna orodja - Preskusne metode za vrednotenje oddajanja vibracij - 1. del: Kotni in vertikalni brusilniki - Dopolnilo A1 (ISO 28927-1:2009/Amd 1:2017)

General Information

Status
Withdrawn
Public Enquiry End Date
29-Nov-2015
Publication Date
29-May-2017
Withdrawal Date
05-Jan-2020
ICS
13.160 - Vibration and shock with respect to human beings
25.080.50 - Grinding and polishing machines
25.140.20 - Electric tools
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
30-Dec-2019
Due Date
22-Jan-2020
Completion Date
06-Jan-2020
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN ISO 28927-1:2009/A1:2017 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders - Amendment 1: Cupped wire brushes (ISO 28927-1:2009/Amd 1:2017)

Relations

Replaced By
SIST EN ISO 28927-1:2020 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2019)
Effective Date
25-Dec-2019
Amends
SIST EN ISO 28927-1:2010 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009)
Effective Date
01-Nov-2015
Revised
SIST EN ISO 28927-1:2020 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2019)
Effective Date
17-Apr-2019
Amends
SIST EN ISO 28927-1:2010 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 28927-1:2010/A1:2017EN ISO 28927-1:2010/A1:2017
PreviousNext
Amendment
EN ISO 28927-1:2010/A1:2017
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 28927-1:2010/A1:2017
01-julij-2017
5RþQDSUHQRVQDHOHNWULþQDRURGMD3UHVNXVQHPHWRGH]DYUHGQRWHQMHRGGDMDQMD
YLEUDFLMGHO.RWQLLQYHUWLNDOQLEUXVLOQLNL'RSROQLOR$ ,62$PG

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part
1: Angle and vertical grinders - Amendment 1: Cupped wire brushes (ISO 28927-
1:2009/Amd 1:2017)
Handgehaltene motorbetriebene Maschinen - Messverfahren zur Ermittlung der
Schwingungsemission - Teil 1: Winkelschleifer und Vertikalschleifer - Änderung 1:(ISO
28927-1:2009/Amd 1:2017)
Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de
vibrations - Partie 1: Meuleuses verticales et meuleuses d'angles - Amendement 1: (ISO
28927-1:2009/Amd 1:2017)
Ta slovenski standard je istoveten z: EN ISO 28927-1:2009/A1:2017
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN ISO 28927-1:2010/A1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 28927-1:2010/A1:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 28927-1:2010/A1:2017


EN ISO 28927-1:2009/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2017
EUROPÄISCHE NORM
ICS 25.140.10; 13.160
English Version

Hand-held portable power tools - Test methods for
evaluation of vibration emission - Part 1: Angle and
vertical grinders - Amendment 1: Cupped wire brushes
(ISO 28927-1:2009/Amd 1:2017)
Machines à moteur portatives - Méthodes d'essai pour Handgehaltene motorbetriebene Maschinen -
l'évaluation de l'émission de vibrations - Partie 1: Messverfahren zur Ermittlung der
Meuleuses verticales et meuleuses d'angles - Schwingungsemission - Teil 1: Winkelschleifer und
Amendement 1: Brosses métalliques creuses (ISO Vertikalschleifer - Änderung 1 (ISO 28927-
28927-1:2009/Amd 1:2017) 1:2009/Amd 1:2017)
This amendment A1 modifies the European Standard EN ISO 28927-1:2009; it was approved by CEN on 8 March 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28927-1:2009/A1:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 28927-1:2010/A1:2017
EN ISO 28927-1:2009/A1:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 28927-1:2010/A1:2017
EN ISO 28927-1:2009/A1:2017 (E)
European foreword
This document (EN ISO 28927-1:2009/A1:2017) has been prepared by Technical Committee ISO/TC
118 "Compressors and pneumatic tools, machines and equipment" in collaboration with Technical
Committee CEN/TC 231 “Mechanical vibration and shock” the secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 28927-1:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by November 2017,
and conflicting national standards shall be withdrawn at the latest by November 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA and ZB, included in EN ISO
28927:1:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
Endorsement notice
The text of ISO 28927-1:2009/Amd 1:2017 has been approved by CEN as EN ISO 28927-
1:2009/A1:2017 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 28927-1:2010/A1:2017

---------------------- Page: 6 ----------------------

SIST EN ISO 28927-1:2010/A1:2017
INTERNATIONAL ISO
STANDARD 28927-1
First edition
2009-12-15
AMENDMENT 1
2017-04
Hand-held portable power tools —
Test methods for evaluation of
vibration emission —
Part 1:
Angle and vertical grinders
AMENDMENT 1: Cupped wire brushes
Machines à moteur portatives — Méthodes d’essai pour l’évaluation
de l’émission de vibrations —
Partie 1: Meuleuses verticales et meuleuses d’angles
AMENDEMENT 1: Brosses métalliques creuses
Reference number
ISO 28927-1:2009/Amd.1:2017(E)
©
ISO 2017

---------------------- Page: 7 ----------------------

SIST EN ISO 28927-1:2010/A1:2017
ISO 28927-1:2009/Amd.1:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 28927-1:2010/A1:2017
ISO 289
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 28927-1:2020(Main)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2019)
EN ISO 28927-1:2019

This Standard specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power-driven angle and vertical grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no-load conditions. The method has been established for surface grinding tasks only. Cutting and sanding generally create lower vibrations. It is intended that the results be used to compare different models of the same type of machine. This document is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, intended for grinding, cutting-off and rough sanding, with bonded, coated and super-abrasive products and with wire brushes for use on all kinds of materials. It is not applicable to die grinders or straight grinders.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28927-4:2011/A1:2019(Amendment)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders - Amendment 1: Cupped wire brushes (ISO 28927-4:2010/Amd 1:2017)
EN ISO 28927-4:2010/A1:2018

2018-12-13 JF:Through Decision BT 177/2018, the BT approved the revised Annex ZA. CCMC will proceed with publication.
2017-08-28: publication on hold due to missing assessment
2018-03-23 JF: Annex ZA not in line with CEN Guide 414. CCMC is examining with the TC and the NAC  which actions are required
2018-07-02 JF: TC revised Annex ZA in line with the CEN Guide 414 and EC expectations. CCMC requested the Consutlant's assessment of the revised Annex ZA with the indicative deadline of 20180808.
2018-11-07 JF: positive Consultant's assessment on Annex ZA. CCMC is preparing a BT document for approval of a revised Annex ZA.
2018-08-08 JF: revised Annex ZA was positively assessed by the Consultant. CCMC is preparing a BT document  for decision about the incorporation of the Annex ZA into the draft standard and its publication,

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28927-12:2013(Main)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012)
EN ISO 28927-12:2012

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power driven portable die grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of the machines where operating under type test conditions. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, equipped with a collet and intended for deburring operations using hard metal burrs or mounted points, on different materials ranging from hard steel to plastics. It is also applicable to low-speed die grinders using flap wheels or cylindrical sleeves.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28927-4:2011(Main)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010)
EN ISO 28927-4:2010

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of straight grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no-load conditions.
This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, intended for grinding and surface finishing using straight grinding wheels type 1, tapered wheels type 4 and cylindrical plugs, e.g. of type 16 (cylindrical plug, tapered cone), 18 (cylindrical plug, flat end), 18R (cylindrical plug, rounded end) and 19 (cylindrical plug, taper-roll shaped), for use on all kinds of materials. It is not applicable to grinders used with wire brushes, nor is it applicable to die grinders where the inserted tool is mounted in a collet. NOTE 1 Typical machines covered by this part of ISO 28927 are illustrated in Figures 1 to 3.
It is intended that the results be used to compare different models of the same type of machine.
NOTE 2 To avoid confusion with the terms “power tool” and “inserted tool”, “machine” is used hereinafter for the former.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28927-3:2010(Main)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009)
EN ISO 28927-3:2009

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven, portable polishers and rotary, orbital and random orbital sanders used for surface-finishing processes, not for material removal. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine when operating under type-test conditions. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means. It is not applicable to straight grinders equipped with a sanding wheel or to belt sanders.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28927-1:2020(Main)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2019)
EN ISO 28927-1:2019

This Standard specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power-driven angle and vertical grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no-load conditions. The method has been established for surface grinding tasks only. Cutting and sanding generally create lower vibrations. It is intended that the results be used to compare different models of the same type of machine. This document is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, intended for grinding, cutting-off and rough sanding, with bonded, coated and super-abrasive products and with wire brushes for use on all kinds of materials. It is not applicable to die grinders or straight grinders.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28927-4:2011/A1:2019(Amendment)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders - Amendment 1: Cupped wire brushes (ISO 28927-4:2010/Amd 1:2017)
EN ISO 28927-4:2010/A1:2018

2018-12-13 JF:Through Decision BT 177/2018, the BT approved the revised Annex ZA. CCMC will proceed with publication.
2017-08-28: publication on hold due to missing assessment
2018-03-23 JF: Annex ZA not in line with CEN Guide 414. CCMC is examining with the TC and the NAC  which actions are required
2018-07-02 JF: TC revised Annex ZA in line with the CEN Guide 414 and EC expectations. CCMC requested the Consutlant's assessment of the revised Annex ZA with the indicative deadline of 20180808.
2018-11-07 JF: positive Consultant's assessment on Annex ZA. CCMC is preparing a BT document for approval of a revised Annex ZA.
2018-08-08 JF: revised Annex ZA was positively assessed by the Consultant. CCMC is preparing a BT document  for decision about the incorporation of the Annex ZA into the draft standard and its publication,

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28927-12:2013(Main)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012)
EN ISO 28927-12:2012

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power driven portable die grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of the machines where operating under type test conditions. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, equipped with a collet and intended for deburring operations using hard metal burrs or mounted points, on different materials ranging from hard steel to plastics. It is also applicable to low-speed die grinders using flap wheels or cylindrical sleeves.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28927-4:2011(Main)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010)
EN ISO 28927-4:2010

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of straight grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no-load conditions.
This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, intended for grinding and surface finishing using straight grinding wheels type 1, tapered wheels type 4 and cylindrical plugs, e.g. of type 16 (cylindrical plug, tapered cone), 18 (cylindrical plug, flat end), 18R (cylindrical plug, rounded end) and 19 (cylindrical plug, taper-roll shaped), for use on all kinds of materials. It is not applicable to grinders used with wire brushes, nor is it applicable to die grinders where the inserted tool is mounted in a collet. NOTE 1 Typical machines covered by this part of ISO 28927 are illustrated in Figures 1 to 3.
It is intended that the results be used to compare different models of the same type of machine.
NOTE 2 To avoid confusion with the terms “power tool” and “inserted tool”, “machine” is used hereinafter for the former.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28927-3:2010(Main)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009)
EN ISO 28927-3:2009

This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held, power-driven, portable polishers and rotary, orbital and random orbital sanders used for surface-finishing processes, not for material removal. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine when operating under type-test conditions. It is intended that the results be used to compare different models of the same type of machine. This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means. It is not applicable to straight grinders equipped with a sanding wheel or to belt sanders.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day