iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50122-1:1998

(Main)

Railway applications - Fixed installations -- Part 1: Protective provisions relating to electrical safety and earthing

Railway applications - Fixed installations -- Part 1: Protective provisions relating to electrical safety and earthing

This standard specifies requirements for the protective provisions relating to electrical safety in fixed installations associated with a.c.-and d.c.-traction systems and to any installations that may be endangered by the traction power supply system It also applies to all fixed installations that are necessary to ensure electrical safety during maintenance work within electric traction systems Note: other provisions may be required to protect work sites for maintenance purposes which are not included in this standard This standard applies to all new lines and to all major revisions to existing lines for electric traction systems described in the standard

Bahnanwendungen - Ortsfeste Anlagen -- Teil 1: Schutzmaßnahmen in bezug auf elektrische Sicherheit und Erdung

Applications ferroviaires - Installations fixes -- Partie 1: Mesures de protection relatives à la sécurité électrique et à la mise à la terre

Železniške naprave – Stabilne naprave električne vleke – 1. del: Zaščitni ukrepi glede električne varnosti in ozemljitev

General Information

Status
Withdrawn
Publication Date
31-Oct-1998
Withdrawal Date
10-Oct-2011
ICS
13.260 - Protection against electric shock. Live working
29.280 - Electric traction equipment
Technical Committee
ŽEN - Electrical applications for railways
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
10-Oct-2011
Due Date
02-Nov-2011
Completion Date
11-Oct-2011
Directive
96/48/EC - Interoperability of the trans-European high-speed rail system
TP104 - Pravilnik o železniških signalnovarnostnih napravah
Mandate
M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
Ref Project
EN 50122-1:1997 - Railway applications - Fixed installations - Part 1: Protective provisions relating to electrical safety and earthing

Relations

Replaced By
SIST EN 50122-1:2011 - Railway applications - Fixed installations - Electrical safety, earthing and bonding - Part 1: Protective provisions against electric shock
Effective Date
28-Jan-2023
Revised
SIST EN 50122-1:2011 - Railway applications - Fixed installations - Electrical safety, earthing and bonding - Part 1: Protective provisions against electric shock
Effective Date
19-Nov-2013
Replaced By
SIST EN 50122-1:2011 - Railway applications - Fixed installations - Electrical safety, earthing and bonding - Part 1: Protective provisions against electric shock
Effective Date
07-Jun-2022
Replaced By
SIST EN 50122-1:2011 - Railway applications - Fixed installations - Electrical safety, earthing and bonding - Part 1: Protective provisions against electric shock
Effective Date
01-Sep-2011

Buy Standard

EN 50122-1:1998EN 50122-1:1998
PreviousNext
Standard
EN 50122-1:1998
English language
89 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50122-1:1998
01-november-1998
äHOH]QLãNHQDSUDYH±6WDELOQHQDSUDYHHOHNWULþQHYOHNH±GHO=DãþLWQLXNUHSL
JOHGHHOHNWULþQHYDUQRVWLLQR]HPOMLWHY
Railway applications - Fixed installations -- Part 1: Protective provisions relating to
electrical safety and earthing
Bahnanwendungen - Ortsfeste Anlagen -- Teil 1: Schutzmaßnahmen in bezug auf
elektrische Sicherheit und Erdung
Applications ferroviaires - Installations fixes -- Partie 1: Mesures de protection relatives à
la sécurité électrique et à la mise à la terre
Ta slovenski standard je istoveten z: EN 50122-1:1997
ICS:
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
29.280 (OHNWULþQDYOHþQDRSUHPD Electric traction equipment
SIST EN 50122-1:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 2 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 3 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 4 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 5 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 6 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 7 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 8 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 9 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 10 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 11 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 12 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 13 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 14 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 15 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 16 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 17 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 18 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 19 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 20 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 21 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 22 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 23 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 24 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 25 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 26 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 27 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 28 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 29 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 30 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 31 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 32 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 33 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 34 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 35 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 36 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 37 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 38 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 39 ----------------------

SIST EN 50122-1:1998

---------------------- Page: 40 ----------------------

SIST EN 5
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50122-1:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
EN 50122-1:2022

1 - General
- adaptation of the Scope of this standard (include electrical safety related interface with vehicles, extension for electrified road transport – as shown above)
- Incorporate such small technical improvements from IEC 62128, made when transferring from previous version 50122-1, only insofar as these are essential for the coherence of the standard 50122-1
- Harmonize definitions with other railway standards (esp. EN 50119)
- check and redefine some definitions, harmonize with IEC 60050:
   o Check and harmonize terms and definitions specific to railway terminology with IEC 60050 chapters 811 and 821. If modification of a definition is essential, consider harmonization with a recent definition used in a railway specific standard and which should postdate the IEC entry.
   o Check and harmonize terms and definitions specific to electric shock with IEC60050 chapter 195 except where the terms and definitions in IEC 61140:2016 are appropriate and postdate IEC 60050 entry.
   o Check and harmonise other terms and definitions with IEC 50050 where appropriate.
- Review and ensure the document accurately and consistently uses the correct ‘verbal forms for expressions of provisions’ (according to the Internal Regulations, Part 3, clause 7), the wording used is clear and achieves good differentiation between normative and informative content.
- Review and ensure the document’s content relating to the prevention of electric shock is harmonized with basic safety publication IEC/EN 61140. In particular, the IEC/EN61140 content on fundamental rules, terminology, protective provisions (i.e. basic protection, fault protection, enhanced protective provisions).
- Review and revise clause 1 to ensure that the document’s scope is clear and accurately stated, it is harmonised with the title and only aspects falling within this scope are included within the document’s normative content. This take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards and in particular the scope of prEN 50488.
2 – Specific
- Review and modify clause 5 and harmonize its content with the relevant aspects of IEC61140, EN50124 series, prEN50488. Particular consideration to be given to the dimensioning of air clearance associated with protective provisions. This will take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards.
- Review and revise clause 6, in particular the content on protective provisions to improve its alignment with basic safety publication IEC/EN 61140 content for this aspect.
- revision of Chapter 7
- Review and revise clause 10.5 to ensure that the content is fit for purpose and is coordinated with EN 50124, EN 50119 and EN5 0488 in particular, such that these standards will provide a coherent approach. This will take note of the on-going SC9XC work on coordination between these standards.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    98 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2011/A4:2017(Amendment)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
EN 50122-1:2011/A4:2017
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2011/A2:2017(Amendment)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
EN 50122-1:2011/A2:2016

To solve misunderstanding about degree of protection for obstacles

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2011/A3:2017(Amendment)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
EN 50122-1:2011/A3:2016

D154/025: Direct publication of Annex ZZ

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2011/AC:2013(Corrigendum)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit -- Part 1: Protective provisions against electric shock
EN 50122-1:2011/AC:2012

This European Standard specifies requirements for the protective provisions relating to electrical safety in fixed installations associated with a.c. and/or d.c. traction systems and to any installations that can be endangered by the traction power supply system. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric traction systems. This European Standard applies to all new lines and to all major revisions to existing lines for the following electric traction systems: a) railways; b) guided mass transport systems such as 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, and 5) magnetically levitated systems, which use a contact line system, c) material transportation systems. This European Standard does not apply to: d) mine traction systems in underground mines; e) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system; f) suspended cable cars; g) funicular railways. This European Standard does not specify working rules for maintenance.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2011(Main)
Railway applications - Fixed installations - Electrical safety, earthing and bonding - Part 1: Protective provisions against electric shock
EN 50122-1:2011

This European Standard specifies requirements for the protective provisions relating to electrical safety in fixed installations associated with a.c. and/or d.c. traction systems and to any installations that can be endangered by the traction power supply system. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric traction systems. This European Standard applies to all new lines and to all major revisions to existing lines for the following electric traction systems: a) railways; b) guided mass transport systems such as 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, and 5) magnetically levitated systems, which use a contact line system, c) material transportation systems. This European Standard does not apply to: d) mine traction systems in underground mines; e) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system; f) suspended cable cars; g) funicular railways. This European Standard does not specify working rules for maintenance.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2011/A1:2011(Amendment)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
EN 50122-1:2011/A1:2011

This European Standard specifies requirements for the protective provisions relating to electrical safety in fixed installations associated with a.c. and/or d.c. traction systems and to any installations that can be endangered by the traction power supply system. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric traction systems. This European Standard applies to all new lines and to all major revisions to existing lines for the following electric traction systems: a) railways; b) guided mass transport systems such as 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, and 5) magnetically levitated systems, which use a contact line system, c) material transportation systems. This European Standard does not apply to: d) mine traction systems in underground mines; e) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system; f) suspended cable cars; g) funicular railways. This European Standard does not specify working rules for maintenance.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-2:2010(Main)
Railway applications - Fixed installations - Electrical safety, earthing and bonding - Part 2: Provisions against the effects of stray currents caused by d.c. traction systems
EN 50122-2:2010

This European Standard specifies requirements for protective provisions against the effects of stray currents, which result from the operation of d.c. traction systems. As experience for several decades has not shown evident corrosion effects from a.c. traction systems and actual investigations are not completed, this European Standard only deals with stray currents flowing from a d.c. traction system. This European Standard applies to all metallic fixed installations which form part of the traction system, and also to any other metallic components located in any position in the earth, which can carry stray currents resulting from the operation of the railway system. This European Standard applies to all new d.c. lines and to all major revisions to existing d.c. lines. The principles may also be applied to existing electrified transportation systems where it is necessary to consider the effects of stray currents. It provides design requirements to allow maintenance. The range of application includes: a) railways, b) guided mass transport systems such as: 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, and 5) magnetically levitated systems, which use a contact line system, c) material transportation systems. This European Standard does not apply to: d) mine traction systems in underground mines, e) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly from the contact line system and are not endangered by the traction power supply system, f) suspended cable cars, g) funicular railways. This European Standard does not specify working rules for maintenance.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
EN 50122-1:2022

1 - General
- adaptation of the Scope of this standard (include electrical safety related interface with vehicles, extension for electrified road transport – as shown above)
- Incorporate such small technical improvements from IEC 62128, made when transferring from previous version 50122-1, only insofar as these are essential for the coherence of the standard 50122-1
- Harmonize definitions with other railway standards (esp. EN 50119)
- check and redefine some definitions, harmonize with IEC 60050:
   o Check and harmonize terms and definitions specific to railway terminology with IEC 60050 chapters 811 and 821. If modification of a definition is essential, consider harmonization with a recent definition used in a railway specific standard and which should postdate the IEC entry.
   o Check and harmonize terms and definitions specific to electric shock with IEC60050 chapter 195 except where the terms and definitions in IEC 61140:2016 are appropriate and postdate IEC 60050 entry.
   o Check and harmonise other terms and definitions with IEC 50050 where appropriate.
- Review and ensure the document accurately and consistently uses the correct ‘verbal forms for expressions of provisions’ (according to the Internal Regulations, Part 3, clause 7), the wording used is clear and achieves good differentiation between normative and informative content.
- Review and ensure the document’s content relating to the prevention of electric shock is harmonized with basic safety publication IEC/EN 61140. In particular, the IEC/EN61140 content on fundamental rules, terminology, protective provisions (i.e. basic protection, fault protection, enhanced protective provisions).
- Review and revise clause 1 to ensure that the document’s scope is clear and accurately stated, it is harmonised with the title and only aspects falling within this scope are included within the document’s normative content. This take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards and in particular the scope of prEN 50488.
2 – Specific
- Review and modify clause 5 and harmonize its content with the relevant aspects of IEC61140, EN50124 series, prEN50488. Particular consideration to be given to the dimensioning of air clearance associated with protective provisions. This will take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards.
- Review and revise clause 6, in particular the content on protective provisions to improve its alignment with basic safety publication IEC/EN 61140 content for this aspect.
- revision of Chapter 7
- Review and revise clause 10.5 to ensure that the content is fit for purpose and is coordinated with EN 50124, EN 50119 and EN5 0488 in particular, such that these standards will provide a coherent approach. This will take note of the on-going SC9XC work on coordination between these standards.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    98 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2011/A4:2017(Amendment)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
EN 50122-1:2011/A4:2017
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day