iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50122-1:2011/A1:2011

(Amendment)

Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock

Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock

This European Standard specifies requirements for the protective provisions relating to electrical safety in fixed installations associated with a.c. and/or d.c. traction systems and to any installations that can be endangered by the traction power supply system. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric traction systems. This European Standard applies to all new lines and to all major revisions to existing lines for the following electric traction systems: a) railways; b) guided mass transport systems such as 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, and 5) magnetically levitated systems, which use a contact line system, c) material transportation systems. This European Standard does not apply to: d) mine traction systems in underground mines; e) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system; f) suspended cable cars; g) funicular railways. This European Standard does not specify working rules for maintenance.

Bahnanwendungen - Ortsfeste Anlagen - Elektrische Sicherheit, Erdung und Rückleitung - Teil 1: Schutzmaßnahmen gegen elektrischen Schlag

Applications ferroviaires - Installations fixes - Sécurité électrique, mise à la terre et circuit de retour - Partie 1: Mesures de protection contre les chocs électrique

Železniške naprave - Stabilne naprave električne vleke - Električna varnost, ozemljitev in povratni tokokrog - 1. del: Zaščitni ukrepi proti električnemu udaru - Dopolnilo A1

Ta evropski standard določa zahteve za zaščitne ukrepe v zvezi z električno varnostjo pri stabilnih napravah električne vleke na izmenični in/ali enosmerni tok in pri vseh inštalacijah, ki jih lahko ogroža napajanje sistema za vleko. Velja tudi za vse vidike stabilnih naprav, potrebnih za zagotavljanje električne varnosti med vzdrževalnim delom v električnih sistemih vleke. Ta evropski standard velja za vse nove vode in za vse večje prenove obstoječih vodov za naslednje električne sisteme vleke: a) železnice; b) vodene sisteme množičnega prevoza, kot so 1) tramvajske proge, 2) nadzemne in podzemne železnice, 3) gorske železnice, 4) trolejbusni sistemi in 5) sistemi z magnetnim lebdenjem, ki uporabljajo sistem voznih vodov, c) sisteme za prevoz materiala. Ta evropski standard ne velja za: d) rudniške vlečne sisteme v podzemnih rudnikih; e) žerjave, prenosne platforme in podobno opremo za prevoz po tirih, začasne strukture (npr. razstavne strukture), če niso napajane neposredno ali prek transformatorjev s sistema voznih vodov in jih ne ogroža napajanje sistema za vleko; f) viseče kabinske žičnice; g) vzpenjače. Ta evropski standard ne določa delovnih pravil za vzdrževanje.

General Information

Status
Published
Publication Date
26-Jul-2011
ICS
13.260 - Protection against electric shock. Live working
29.280 - Electric traction equipment
Technical Committee
ŽEN - Electrical applications for railways
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
19-Jul-2011
Due Date
23-Sep-2011
Completion Date
27-Jul-2011
Directive
2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
TP055 - Pravilnik o projektiranju, gradnji in vzdrževanju stabilnih naprav električne vleke enosmernega sistema 3 kV
Ref Project
EN 50122-1:2011/A1:2011 - Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock

Relations

Replaced By
SIST EN 50122-1:2022 - Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
Effective Date
06-Sep-2022
Amends
SIST EN 50122-1:2011 - Railway applications - Fixed installations - Electrical safety, earthing and bonding - Part 1: Protective provisions against electric shock
Effective Date
01-Sep-2011
Amends
SIST EN 50122-1:2011 - Railway applications - Fixed installations - Electrical safety, earthing and bonding - Part 1: Protective provisions against electric shock
Effective Date
28-Jan-2023
Revised
SIST EN 50122-1:2022 - Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
Effective Date
17-Sep-2018

Buy Standard

EN 50122-1:2011/A1:2011EN 50122-1:2011/A1:2011
PreviousNext
Amendment
EN 50122-1:2011/A1:2011
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50122-1:2011/A1:2011
01-september-2011
äHOH]QLãNHQDSUDYH6WDELOQHQDSUDYHHOHNWULþQHYOHNH(OHNWULþQDYDUQRVW
R]HPOMLWHYLQSRYUDWQLWRNRNURJGHO=DãþLWQLXNUHSLSURWLHOHNWULþQHPXXGDUX
'RSROQLOR$
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit
- Part 1: Protective provisions against electric shock
Bahnanwendungen - Ortsfeste Anlagen - Elektrische Sicherheit, Erdung und Rückleitung
- Teil 1: Schutzmaßnahmen gegen elektrischen Schlag
Applications ferroviaires - Installations fixes - Sécurité électrique, mise à la terre et circuit
de retour - Partie 1: Mesures de protection contre les chocs électrique
Ta slovenski standard je istoveten z: EN 50122-1:2011/A1:2011
ICS:
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
29.280 (OHNWULþQDYOHþQDRSUHPD Electric traction equipment
SIST EN 50122-1:2011/A1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50122-1:2011/A1:2011

---------------------- Page: 2 ----------------------

SIST EN 50122-1:2011/A1:2011

EUROPEAN STANDARD
EN 50122-1/A1

NORME EUROPÉENNE
June 2011
EUROPÄISCHE NORM

ICS 29.280


English version


Railway applications -
Fixed installations -
Electrical safety, earthing and the return circuit -
Part 1: Protective provisions against electric shock



Applications ferroviaires -  Bahnanwendungen -
Installations fixes - Ortsfeste Anlagen -
Sécurité électrique, mise à la terre et Elektrische Sicherheit, Erdung und
circuit de retour - Rückleitung -
Partie 1: Mesures de protection contre les Teil 1: Schutzmaßnahmen gegen
chocs électriques elektrischen Schlag





This amendment A1 modifies the European Standard EN 50122-1:2011; it was approved by CENELEC on
2011-04-25. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50122-1:2011/A1:2011 E

---------------------- Page: 3 ----------------------

SIST EN 50122-1:2011/A1:2011
EN 50122-1:2011/A1:2011 – 2 –
Foreword
This amendment to the European Standard EN 50122-1:2011 was prepared by SC 9XC, Electric
supply and earthing systems for public transport equipment and ancilla
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50122-1:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
EN 50122-1:2022

1 - General
- adaptation of the Scope of this standard (include electrical safety related interface with vehicles, extension for electrified road transport – as shown above)
- Incorporate such small technical improvements from IEC 62128, made when transferring from previous version 50122-1, only insofar as these are essential for the coherence of the standard 50122-1
- Harmonize definitions with other railway standards (esp. EN 50119)
- check and redefine some definitions, harmonize with IEC 60050:
   o Check and harmonize terms and definitions specific to railway terminology with IEC 60050 chapters 811 and 821. If modification of a definition is essential, consider harmonization with a recent definition used in a railway specific standard and which should postdate the IEC entry.
   o Check and harmonize terms and definitions specific to electric shock with IEC60050 chapter 195 except where the terms and definitions in IEC 61140:2016 are appropriate and postdate IEC 60050 entry.
   o Check and harmonise other terms and definitions with IEC 50050 where appropriate.
- Review and ensure the document accurately and consistently uses the correct ‘verbal forms for expressions of provisions’ (according to the Internal Regulations, Part 3, clause 7), the wording used is clear and achieves good differentiation between normative and informative content.
- Review and ensure the document’s content relating to the prevention of electric shock is harmonized with basic safety publication IEC/EN 61140. In particular, the IEC/EN61140 content on fundamental rules, terminology, protective provisions (i.e. basic protection, fault protection, enhanced protective provisions).
- Review and revise clause 1 to ensure that the document’s scope is clear and accurately stated, it is harmonised with the title and only aspects falling within this scope are included within the document’s normative content. This take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards and in particular the scope of prEN 50488.
2 – Specific
- Review and modify clause 5 and harmonize its content with the relevant aspects of IEC61140, EN50124 series, prEN50488. Particular consideration to be given to the dimensioning of air clearance associated with protective provisions. This will take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards.
- Review and revise clause 6, in particular the content on protective provisions to improve its alignment with basic safety publication IEC/EN 61140 content for this aspect.
- revision of Chapter 7
- Review and revise clause 10.5 to ensure that the content is fit for purpose and is coordinated with EN 50124, EN 50119 and EN5 0488 in particular, such that these standards will provide a coherent approach. This will take note of the on-going SC9XC work on coordination between these standards.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    98 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2011/A4:2017(Amendment)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
EN 50122-1:2011/A4:2017
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2011/A2:2017(Amendment)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
EN 50122-1:2011/A2:2016

To solve misunderstanding about degree of protection for obstacles

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2011/A3:2017(Amendment)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
EN 50122-1:2011/A3:2016

D154/025: Direct publication of Annex ZZ

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2011/AC:2013(Corrigendum)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit -- Part 1: Protective provisions against electric shock
EN 50122-1:2011/AC:2012

This European Standard specifies requirements for the protective provisions relating to electrical safety in fixed installations associated with a.c. and/or d.c. traction systems and to any installations that can be endangered by the traction power supply system. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric traction systems. This European Standard applies to all new lines and to all major revisions to existing lines for the following electric traction systems: a) railways; b) guided mass transport systems such as 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, and 5) magnetically levitated systems, which use a contact line system, c) material transportation systems. This European Standard does not apply to: d) mine traction systems in underground mines; e) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system; f) suspended cable cars; g) funicular railways. This European Standard does not specify working rules for maintenance.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2011(Main)
Railway applications - Fixed installations - Electrical safety, earthing and bonding - Part 1: Protective provisions against electric shock
EN 50122-1:2011

This European Standard specifies requirements for the protective provisions relating to electrical safety in fixed installations associated with a.c. and/or d.c. traction systems and to any installations that can be endangered by the traction power supply system. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric traction systems. This European Standard applies to all new lines and to all major revisions to existing lines for the following electric traction systems: a) railways; b) guided mass transport systems such as 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, and 5) magnetically levitated systems, which use a contact line system, c) material transportation systems. This European Standard does not apply to: d) mine traction systems in underground mines; e) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system; f) suspended cable cars; g) funicular railways. This European Standard does not specify working rules for maintenance.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-2:2010(Main)
Railway applications - Fixed installations - Electrical safety, earthing and bonding - Part 2: Provisions against the effects of stray currents caused by d.c. traction systems
EN 50122-2:2010

This European Standard specifies requirements for protective provisions against the effects of stray currents, which result from the operation of d.c. traction systems. As experience for several decades has not shown evident corrosion effects from a.c. traction systems and actual investigations are not completed, this European Standard only deals with stray currents flowing from a d.c. traction system. This European Standard applies to all metallic fixed installations which form part of the traction system, and also to any other metallic components located in any position in the earth, which can carry stray currents resulting from the operation of the railway system. This European Standard applies to all new d.c. lines and to all major revisions to existing d.c. lines. The principles may also be applied to existing electrified transportation systems where it is necessary to consider the effects of stray currents. It provides design requirements to allow maintenance. The range of application includes: a) railways, b) guided mass transport systems such as: 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, and 5) magnetically levitated systems, which use a contact line system, c) material transportation systems. This European Standard does not apply to: d) mine traction systems in underground mines, e) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly from the contact line system and are not endangered by the traction power supply system, f) suspended cable cars, g) funicular railways. This European Standard does not specify working rules for maintenance.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
EN 50122-1:2022

1 - General
- adaptation of the Scope of this standard (include electrical safety related interface with vehicles, extension for electrified road transport – as shown above)
- Incorporate such small technical improvements from IEC 62128, made when transferring from previous version 50122-1, only insofar as these are essential for the coherence of the standard 50122-1
- Harmonize definitions with other railway standards (esp. EN 50119)
- check and redefine some definitions, harmonize with IEC 60050:
   o Check and harmonize terms and definitions specific to railway terminology with IEC 60050 chapters 811 and 821. If modification of a definition is essential, consider harmonization with a recent definition used in a railway specific standard and which should postdate the IEC entry.
   o Check and harmonize terms and definitions specific to electric shock with IEC60050 chapter 195 except where the terms and definitions in IEC 61140:2016 are appropriate and postdate IEC 60050 entry.
   o Check and harmonise other terms and definitions with IEC 50050 where appropriate.
- Review and ensure the document accurately and consistently uses the correct ‘verbal forms for expressions of provisions’ (according to the Internal Regulations, Part 3, clause 7), the wording used is clear and achieves good differentiation between normative and informative content.
- Review and ensure the document’s content relating to the prevention of electric shock is harmonized with basic safety publication IEC/EN 61140. In particular, the IEC/EN61140 content on fundamental rules, terminology, protective provisions (i.e. basic protection, fault protection, enhanced protective provisions).
- Review and revise clause 1 to ensure that the document’s scope is clear and accurately stated, it is harmonised with the title and only aspects falling within this scope are included within the document’s normative content. This take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards and in particular the scope of prEN 50488.
2 – Specific
- Review and modify clause 5 and harmonize its content with the relevant aspects of IEC61140, EN50124 series, prEN50488. Particular consideration to be given to the dimensioning of air clearance associated with protective provisions. This will take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards.
- Review and revise clause 6, in particular the content on protective provisions to improve its alignment with basic safety publication IEC/EN 61140 content for this aspect.
- revision of Chapter 7
- Review and revise clause 10.5 to ensure that the content is fit for purpose and is coordinated with EN 50124, EN 50119 and EN5 0488 in particular, such that these standards will provide a coherent approach. This will take note of the on-going SC9XC work on coordination between these standards.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    98 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2011/A4:2017(Amendment)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
EN 50122-1:2011/A4:2017
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-1:2011/A2:2017(Amendment)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
EN 50122-1:2011/A2:2016

To solve misunderstanding about degree of protection for obstacles

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day