TP055 - Pravilnik o projektiranju, gradnji in vzdrževanju stabilnih naprav električne vleke enosmernega sistema 3 kV
Pravilnik o projektiranju, gradnji in vzdrževanju stabilnih naprav električne vleke enosmernega sistema 3 kV
Pravilnik o projektiranju, gradnji in vzdrževanju stabilnih naprav električne vleke enosmernega sistema 3 kV
Datum prenehanja veljavnosti - 16.06.2018 Se še uporablja!! SKLIC NA: DIN 43141 DIN 43140 DIN 48201 DIN 48202 DIN 1024 DIN 1029 DIN 1013 DIN 1014 DIN 1017 DIN 17100 DIN 50975 DIN 50976 DIN 48007 VDE 0446 VDE 0449
General Information
- Amendment3 pagesEnglish languagesale 10% offe-Library read for1 day
To solve misunderstanding about degree of protection for obstacles
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
D154/025: Direct publication of Annex ZZ
- Amendment3 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard covers d.c. metal-enclosed and non-metallic enclosed switchgear
assemblies used in indoor stationary installations of traction systems, with nominal voltage
not exceeding 3 000 V.
It is intended that individual items of equipment, for example circuit breakers, housed in the
assembly are designed, manufactured and individually tested (simulating the enclosure when
necessary) in accordance with their respective parts of EN 50123 or, when appropriate, with
another applicable standard.
NOTE 1 The requirements covered in this European Standard are those concerning the assembly as such, its
enclosure and the mutual influence of the equipment enclosed.
NOTE 2 EMC requirements are covered by EN 50121-5 and additional requirements concerning dependability
(RAMS) are covered by EN 50126.
- Amendment14 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment14 pagesEnglish languagesale 10% offe-Library read for1 day
Amendment to cover Norwegian A-deviation.
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 50123 specifies requirements for outdoor d.c. switch-disconnectors, disconnectors and earthing switches for use in outdoor fixed installations of traction systems.
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 50123 specifies requirements for d.c. disconnectors, switch-disconnectors and earthing switches for use in indoor fixed installations of traction systems.
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for the protective provisions relating to electrical safety in fixed installations associated with a.c. and/or d.c. traction systems and to any installations that can be endangered by the traction power supply system. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric traction systems. This European Standard applies to all new lines and to all major revisions to existing lines for the following electric traction systems: a) railways; b) guided mass transport systems such as 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, and 5) magnetically levitated systems, which use a contact line system, c) material transportation systems. This European Standard does not apply to: d) mine traction systems in underground mines; e) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system; f) suspended cable cars; g) funicular railways. This European Standard does not specify working rules for maintenance.
- Corrigendum1 pageEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for the protective provisions relating to electrical safety in fixed installations associated with a.c. and/or d.c. traction systems and to any installations that can be endangered by the traction power supply system. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric traction systems. This European Standard applies to all new lines and to all major revisions to existing lines for the following electric traction systems: a) railways; b) guided mass transport systems such as 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, and 5) magnetically levitated systems, which use a contact line system, c) material transportation systems. This European Standard does not apply to: d) mine traction systems in underground mines; e) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system; f) suspended cable cars; g) funicular railways. This European Standard does not specify working rules for maintenance.
- Standard81 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for the protective provisions relating to electrical safety in fixed installations associated with a.c. and/or d.c. traction systems and to any installations that can be endangered by the traction power supply system. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric traction systems. This European Standard applies to all new lines and to all major revisions to existing lines for the following electric traction systems: a) railways; b) guided mass transport systems such as 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, and 5) magnetically levitated systems, which use a contact line system, c) material transportation systems. This European Standard does not apply to: d) mine traction systems in underground mines; e) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system; f) suspended cable cars; g) funicular railways. This European Standard does not specify working rules for maintenance.
- Amendment3 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for protective provisions against the effects of stray currents, which result from the operation of d.c. traction systems. As experience for several decades has not shown evident corrosion effects from a.c. traction systems and actual investigations are not completed, this European Standard only deals with stray currents flowing from a d.c. traction system. This European Standard applies to all metallic fixed installations which form part of the traction system, and also to any other metallic components located in any position in the earth, which can carry stray currents resulting from the operation of the railway system. This European Standard applies to all new d.c. lines and to all major revisions to existing d.c. lines. The principles may also be applied to existing electrified transportation systems where it is necessary to consider the effects of stray currents. It provides design requirements to allow maintenance. The range of application includes: a) railways, b) guided mass transport systems such as: 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, and 5) magnetically levitated systems, which use a contact line system, c) material transportation systems. This European Standard does not apply to: d) mine traction systems in underground mines, e) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly from the contact line system and are not endangered by the traction power supply system, f) suspended cable cars, g) funicular railways. This European Standard does not specify working rules for maintenance.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies requirements for the protective provisions relating to electrical safety in fixed installations, when it is reasonably likely that hazardous voltages or currents will arise for people or equipment, as a result of the mutual interaction of a.c. and d.c. electric traction systems. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric traction systems. The mutual interaction can be of any of the following kinds: - parallel running of a.c. and d.c. electric traction systems; - crossing of a.c. and d.c. electric traction systems; - shared use of tracks, buildings or other structures; - system separation sections between a.c. and d.c. electric traction systems. Scope is limited to basic frequency voltages and currents and their superposition. This European Standard does not cover radiated interferences. This European Standard applies to all new lines, extensions and to all major revisions to existing lines for the following electric traction systems: a) railways; b) guided mass transport systems such as: 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, and 5) magnetically levitated systems, which use a contact line system; c) material transportation systems. The standard does not apply to: d) mine traction systems in underground mines; e) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system for railways; f) suspended cable cars; g) funicular railways; h) procedures or rules for maintenance.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard specifies the requirements for the performance of all semiconductor power converters and semiconductor power switches using controllable and/or non-controllable electronic valve devices. The electronic valve devices mainly comprise semiconductor devices, either not controllable (i.e. rectifier diodes) or controllable (i.e. thyristors, triacs, turn-off thyristors and power transistors). The controllable devices may be reverse blocking or reverse conducting and controlled by means of current, voltage or light. Non-bistable devices are assumed to be operated in the switched mode. This standard is primarily intended to specify the basic requirements for converters in general and the requirements applicable to line commutated converters for conversion of a.c. power to d.c. power or vice versa. Parts of this standard are also applicable to other types of electronic power converter provided that they do not have their own product standards. These specific equipment requirements are applicable to semiconductor power converters that either implement power conversion or use commutation (for example semiconductor selfcommutated converters) or involve particular applications (for example semiconductor converters for d.c. motor drives) or include a combination of said characteristics (for example direct d.c. converters for electric rolling stock). This standard is applicable to all power converters not covered by a dedicated product standard, or if special features are not covered by the dedicated product standard. Dedicated product standards for power converters should refer to this International Standard.
- Standard99 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard applies to composite suspension/tension insulators consisting of a load-bearing cylindrical insulating solid core consisting of fibres - usually glass - in a resinbased matrix, a housing (outside the insulating core) made of polymeric material and end fittings permanently attached to the insulating core. Composite insulators covered by this standard are intended for use as suspension/tension line insulators, but it should be noted that these insulators can occasionally be subjected to compression or bending, for example when used as phase-spacers. This standard can be applied in part to hybrid composite insulators where the core is made of a homogeneous material (porcelain, resin), see Clause 8. The object of this standard is to - define the terms used, - prescribe test methods, - prescribe acceptance criteria. This standard does not include requirements dealing with the choice of insulators for specific operating conditions.
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard32 pagesFrench languagesale 10% offe-Library read for1 day
- Standard – translation33 pagesSlovenian languagesale 10% offe-Library read for1 day
This European Standard specifies the main characteristics of the supply voltages of traction systems, such as traction fixed installations, including auxiliary devices fed by the contact line, and rolling stock, for use in the following applications : - railways; - guided mass transport systems such as tramways, elevated and underground railways mountain railways, and trolleybus systems; - material transportation systems. This European Standard does not apply to - mine traction systems in underground mines, - cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system, - suspended cable cars, - funicular railways.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This Part 1 of the European standards series EN 50121 outlines the structure and the content of the whole set. This part alone is not sufficient to give presumption of conformity to the essential requirements of the EMC-Directive and must be used in conjunction with other parts of this standard. Annex A describes the characteristics of the railway system which affect electromagnetic compatibility (EMC) behaviour. Phenomena excluded from the set are Nuclear EM pulse, abnormal operating conditions and the induction effects of direct lightning strike. Emission limits at the railway boundary do not apply to intentional transmitters within the railway boundaries. Safety considerations are not covered by this set of standards. The biological effects of non-ionising radiation as well as apparatus for medical assistance, such as pacemakers, are not considered here.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
Partly supersedes EN 60146-1-1:1993
- Standard53 pagesEnglish languagesale 10% offe-Library read for1 day
Supersedes HD 591 S1:1993 and EN 60146-1-3:1993 (for the transformers mentioned in the scope of this EN only) * D127/C015: Corrigendum to be issued
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard provides requirements for some type tests which are significant only when made on the entire group. It provides also a basic relationship between compatible ratings of traction transformer and converter(s), in order to provide minimum requirements for the choice of their ratings. Moreover it gives the minimum values to be considered in order to choose switching devices with characteristics suitable for the converter group(s) involved. Annexes provide useful information as a guide for the group designer. Table 1 indicates the components of a converter group and the relevant applicable standards.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard gives the requirements for isolating current transducers and other current measuring devices used in d.c. railway applications, fixed installations. This transducer is normally positioned between the sensor in the live switchboard conductor or rail and the secondary device, giving galvanic insulation between the input and the output.
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
Supersedes ENV 50123-7-1:1998
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
The EN 50123 series specifies requirements for d.c. switchgear and controlgear and is intended to be used in fixed electrical installations with nominal voltage not exceeding 3 000 V d.c., which supply electrical power to vehicles for public guided transport, i.e. railway vehicles, tramway vehicles, underground vehicles and trolley-buses. Part 1 specifies general requirements. The other parts are covering Part 2 D.C. circuit breakers, Part 3 Indoor d.c. disconnectors, switch-disconnectors and earthing switches, Part 4 Outdoor d.c. disconnectors, switch-disconnectors and earthing switches, Part 5 Surge arresters and low voltage limiters for specific use in d.c. systems, Part 6 D.C. switchgear assemblies, Part 7 1 Measurement, control and protection devices for specific use in d.c. traction systems – Application guide, Part 7 2 Measurement, control and protection devices for specific use in d.c. traction systems – Isolating current transducers and other current measuring devices, Part 7 3 Measurement, control and protection devices for specific use in d.c. traction systems –Isolating voltage transducers and other voltage measuring devices
- Standard46 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 50123 specifies requirements for d.c. disconnectors, switch-disconnectors and earthing switches for use in indoor fixed installations of traction systems.
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 50123 specifies requirements for outdoor d.c. switch-disconnectors, disconnectors and earthing switches for use in outdoor fixed installations of traction systems.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard gives the requirements for isolating voltage transducers and other voltage measuring devices used in d.c. railway applications, fixed installations. This transducer is normally positioned between the voltage sensor on the live switchboard conductor or rail and the secondary device, giving galvanic insulation between the input and the output.
- Standard7 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard covers d.c. metal-enclosed and non-metallic enclosed switchgear
assemblies used in indoor stationary installations of traction systems, with nominal voltage
not exceeding 3 000 V.
It is intended that individual items of equipment, for example circuit breakers, housed in the
assembly are designed, manufactured and individually tested (simulating the enclosure when
necessary) in accordance with their respective parts of EN 50123 or, when appropriate, with
another applicable standard.
NOTE 1 The requirements covered in this European Standard are those concerning the assembly as such, its
enclosure and the mutual influence of the equipment enclosed.
NOTE 2 EMC requirements are covered by EN 50121-5 and additional requirements concerning dependability
(RAMS) are covered by EN 50126.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 50123 specifies requirements for d.c. circuit breakers for use in fixed installations of traction systems. NOTE Switchgear assemblies, electromagnetic compatibility (EMC) and dependability are not covered in this part of EN 50123, but by other parts of this standard or by other standards, as indicated in EN 50123-1.
- Standard27 pagesEnglish languagesale 10% offe-Library read for1 day
EN following parallel vote
- Standard50 pagesEnglish languagesale 10% offe-Library read for1 day
Specifies characteristics wherein convertor transformers differ from ordinary power transformers. In all other respects, the rules specified in HD 398.1 shall apply.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment2 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies requirements, methods of test, and performance criteria for control and indicating equipment (see item B of figure 1 of EN 54-1) for usein fire detection and fire alarm systems installed in buildings.
- Standard64 pagesEnglish languagesale 10% offe-Library read for1 day
This standard specifies requirements, methods of test and performance criteria for power supply equipment (see component L of figure 1 of EN 54-1:1996) of fire detection and fire alarm systems installed in buildings. Note: Power supply equipment with special characteristics, developed for particular appli- cations, is not necessarily the subject of this standard and may require further tests.
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
Document prepared by CLC/TC 36B disbanded at 91 BT
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
Document prepared by CLC/TC 36B disbanded at 91 BT
- Standard62 pagesEnglish languagesale 10% offe-Library read for1 day