SIST EN IEC 61300-2-27:2024
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust (laminar flow) (IEC 61300-2-27:2024)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust (laminar flow) (IEC 61300-2-27:2024)
IEC 61300-2-27:2024 determines the effects of dust on fibre optic interconnecting devices or passive components. This second edition cancels and replaces the first edition published in 1995. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) normative references have been added;
b) the relative humidity requirement during the test has been modified;
c) the procedure description has been modified;
d) Figure 1 showing possible test configurations has been added;
e) the severity of the test has been updated according to the component and performance category;
f) Clause 8 has been added, listing details to be specified and reported.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Meßverfahren - Teil 2-27: Prüfungen: Staub - Laminare Strömung (IEC 61300-2-27:2024)
Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 2-27: Essais - Poussière (écoulement laminaire) (IEC 61300-2-27:2024)
IEC 61300-2-27: 2024 détermine les effets de la poussière sur les dispositifs d'interconnexion ou composants passifs fibroniques. Cette deuxième édition annule et remplace la première édition parue en 1995. Cette édition constitue une révision technique.Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) des références normatives ont été ajoutées;
b) l’exigence d'humidité relative au cours de l’essai a été modifiée;
c) la description du mode opératoire a été modifiée;
d) La Figure 1 représentant les configurations d’essai possibles a été ajoutée;
e) la sévérité de l’essai conformément à la catégorie du composant et à la catégorie de performance a été mise à jour;
f) L’Article 8 a été ajouté, énumérant les informations détaillées à spécifier et à consigner.
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-27. del: Preskusi - Prah (laminarni tok) (IEC 61300-2-27:2024)
Standard IEC 61300-2-27:2024 določa učinke prahu na optične spojne elemente ali pasivne komponente. Druga izdaja razveljavlja in nadomešča prvo izdajo, objavljeno leta 1995. Ta izdaja je tehnično popravljena izdaja. Ta izdaja v primerjavi s prejšnjo vključuje naslednje pomembne tehnične spremembe:
a) dodane so bile zveze s standardi;
b) zahteva glede relativne vlažnosti med preskusom je bila spremenjena;
c) opis postopka je bil spremenjen;
d) dodana je bila slika 1, ki prikazuje možne preskusne konfiguracije;
e) stopnja zahtevnosti preskusa je bila posodobljena v skladu s kategorijo komponent in zmogljivosti;
f) dodana je bila točka 8 s podrobnostmi, ki jih je treba navesti in o njih poročati.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 2-27. del: Preskusi - Prah (laminarni tok) (IEC 61300-2-27:2024)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-27: Tests - Dust (laminar flow) (IEC 61300-2-27:2024)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Meßverfahren - Teil 2-27: Prüfungen: Staub - Laminare Strömung (IEC 61300-2-
27:2024)
Dispositifs d'interconnexion et composants passifs fibroniques - Procédures
fondamentales d'essais et de mesures - Partie 2-27: Essais - Poussière (écoulement
laminaire) (IEC 61300-2-27:2024)
Ta slovenski standard je istoveten z: EN IEC 61300-2-27:2024
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61300-2-27
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2024
ICS 33.180.20 Supersedes EN 61300-2-27:1997
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 2-27: Tests -
Dust (laminar flow)
(IEC 61300-2-27:2024)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Meßverfahren - Teil 2-
mesures - Partie 2-27: Essais - Poussière (écoulement 27: Prüfungen: Staub - Laminare Strömung
laminaire) (IEC 61300-2-27:2024)
(IEC 61300-2-27:2024)
This European Standard was approved by CENELEC on 2024-06-06. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61300-2-27:2024 E
European foreword
The text of document 86B/4875/FDIS, future edition 2 of IEC 61300-2-27, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61300-2-27:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-03-06
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-06-06
document have to be withdrawn
This document supersedes EN 61300-2-27:1997 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61300-2-27:2024 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60068-2-68 NOTE Approved as EN 60068-2-68
IEC 60529 NOTE Approved as EN 60529
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61300-1 - Fibre optic interconnecting devices and EN IEC 61300-1 -
passive components - Basic test and
measurement procedures - Part 1: General
and guidance
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 -
passive components - Basic test and
measurement procedures - Part 3-1:
Examinations and measurements - Visual
examination
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures - Part 3-3:
Examinations and measurements - Active
monitoring of changes in attenuation and
return loss
IEC 61300-3-4 - Fibre optic interconnecting devices and EN IEC 61300-3-4 -
passive components - Basic test and
measurement procedures - Part 3-4:
Examinations and measurements -
Attenuation
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures - Part 3-6:
Examinations and measurements - Return
loss
IEC 61300-3-35 - Fibre optic interconnecting devices and EN IEC 61300-3-35 -
passive components - Basic test and
measurement procedures - Part 3-35:
Examinations and measurements - Visual
inspection of fibre optic connectors and
fibre-stub transceivers
IEC 61753 series Fibre optic interconnecting devices and EN IEC 61753 series
passive components - Performance
standard
Publication Year Title EN/HD Year
IEC 62005 series Fibre optic interconnecting devices and EN IEC 62005 series
passive components - Reliability
IEC/TR 62627-01 - Fibre optic interconnecting devices and - -
passive components - Part 01: Fibre optic
connector cleaning methods
IEC/TR 62572-4 - Fibre optic active components and devices - -
- Reliability standards - Part 4: Guidelines
for optical connector end-face cleaning
methods for receptacle style optical
transceivers
IEC 61300-2-27 ®
Edition 2.0 2024-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures –
Part 2-27: Tests – Dust (laminar flow)
Dispositifs d'interconnexion et composants passifs fibroniques – Procédures
fondamentales d'essais et de mesures –
Partie 2-27: Essais – Poussière (écoulement laminaire)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-8829-0
– 2 – IEC 61300-2-27:2024 IEC 2024
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 General description . 6
5 Apparatus . 6
5.1 Test chamber . 6
5.2 Dust . 6
5.3 Optical measurement equipment . 6
6 Procedure . 6
6.1 Preparation of DUT . 6
6.2 Preconditioning . 7
6.3 Mounting of DUT . 7
6.4 Measure of initial optical properties . 8
6.5 Monitoring of optical properties . 8
6.6 Initial dust exposure . 8
6.7 Thermal conditioning . 8
6.8 Dust exposure . 8
6.9 Recovery . 8
6.10 Final measurements and examinations . 9
7 Severity . 9
8 Details to be specified and reported. 9
Bibliography . 10
Figure 1 – Possible test configurations . 7
Table 1 – Test severities . 9
IEC 61300-2-27:2024 IEC 2024 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 2-27: Tests – Dust (laminar flow)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC Nationa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.