SIST EN IEC 61754-36:2025
(Main)Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 36: Type SAC connector family (IEC 61754-36:2025)
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 36: Type SAC connector family (IEC 61754-36:2025)
This document defines the standard mechanical interface dimensions for the type of SAC family of connectors.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 36: Steckverbinderfamilie Typ SAC (IEC 61754-36:2025)
Dispositifs d’interconnexion et composants passifs fibroniques - Interfaces de connecteurs fibroniques - Partie 36: Famille de connecteurs de type SAC (IEC 61754-36:2025)
IEC 61754-36:2025 définit les dimensions d’interface mécanique normales pour la famille de connecteurs de type SAC.
Optični spojni elementi in pasivne komponente - Vmesniki za optične konektorje - 36. del: Družina konektorjev vrste SAC (IEC 61754-36:2025)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 61754-36:2022
01-marec-2022
Optični spojni elementi in pasivne komponente - Vmesniki za optične konektorje -
36. del: Skupina konektorjev vrste SAC
Fibre optic interconnecting devices and passive components - Fibre optic connector
interfaces - Part 36: Type SAC connector family
Dispositifs d’interconnexion et composants passifs fibroniques - Interfaces de
connecteurs fibroniques - Partie 36: Famille de connecteurs de type SAC
Ta slovenski standard je istoveten z: prEN 61754-36:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN 61754-36:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 61754-36:2022
oSIST prEN 61754-36:2022
86B/4549/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61754-36 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2021-12-31 2022-03-25
SUPERSEDES DOCUMENTS:
86B/4487/CD, 86B/4514A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces
- Part 36: Type SAC connector family
PROPOSED STABILITY DATE: 2032
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
oSIST prEN 61754-36:2022
IEC CDV 61754-36/Ed1 IEC:2021 – 2 – 86B/4549/CDV
1 CONTENTS
3 FOREWORD . 4
4 INTRODUCTION . 6
5 1 Scope . 7
6 2 Normative references . 7
7 3 Terms, definitions and abbreviated terms . 7
8 3.1 Terms and definitions . 7
9 3.2 Abbreviated items . 7
10 4 Description . 7
11 5 Interfaces . 8
12 Annex A (Normative) Fibre core locations . 22
13 Annex B (Informative) Additional adaptor dimensional information . 23
14 Annex C (Informative) Latching mechanism . 31
15 BIBLIOGRAPHY . 34
17 Figure 1 – Duplex plug connector reference planes. 9
18 Figure 2 – Plug connector interface . 10
19 Figure 3 – Angled PC plug connector interface . 13
20 Figure 4 – Duplex adaptor interface (1 of 2) . 14
21 Figure 4– Duplex adaptor interface (2 of 2) . 15
22 Figure 5 – Quadruplex adaptor interface . 18
23 Figure 6 – Duplex active device receptacle interface. 19
24 Figure 7 – Quadruplex active device receptacle interface . 20
25 Figure 8 – Pin gage for adaptors and active device receptacle . 21
26 Figure A.1 – Expanded view from front and the oriented fibre core locations, not- to-
27 scale . 22
28 Figure B.1 – Duplex rectangular flange adaptor . 23
29 Figure B.2 – Duplex rectangular no flange adaptor . 24
30 Figure B.3 – Quadruplex rectangular flange adaptor, SC footprint . 25
31 Figure B.4 – Quadruplex rectangular no flange adaptor, SC footprint . 26
32 Figure B.5 – Octuplex rectangular flange adaptor, SC footprint . 27
33 Figure B.6 – Octuplex no flange adaptor, SC footprint . 28
34 Figure B.7 – Octuplex rectangular flange adaptor . 29
35 Figure B.8 – Octuplex no flange adaptor . 30
36 Figure C.1 – Latched configuration of a plug connector to adapter/receptacle . 31
37 Figure C.2 – Unlatched configuration of a plug connector from adapter/receptacle . 32
39 Table 1 – Plug to Adaptor/Receptacle Intermateability . 9
40 Table 2 – Dimensions of the plug connector interface (1 of 2) . 11
41 Table 2 – Dimensions of the plug connector interface (2 of 2) . 12
42 Table 3 – Dimensions of Angled PC plug interface . 13
oSIST prEN 61754-36:2022
IEC CDV 61754-36/Ed1 IEC:2021 – 3 – 86B/4549/CDV
43 Table 4 – Dimensions of duplex adaptor interface (1 of 2) . 16
44 Table 4 – Dimensions of duplex adaptor interface (2 of 2) . 17
45 Table 5 – Quadruplex adaptor basic dimensions . 18
46 Table 6 – Dimensions of duplex active device receptacle interface . 19
47 Table 7 – Dimensions of quadruplex active device receptacle . 20
48 Table 8 – Pin gage dimensions . 21
49 Table B.1 – Dimensions of duplex rectangular flange adaptor . 24
50 Table B.2 – Dimensions of quadruplex flange adaptor, SC footprint . 26
51 Table B.3 – Dimensions of octuplex flange adaptor, SC footprint . 28
52 Table B.4 – Dimensions of octuplex rectangular flange adaptor . 30
53 Table C.1– Dimensions of a plug connector with adapter/receptacle for latched and
54 unlatched configurations . 33
oSIST prEN 61754-36:2022
IEC CDV 61754-36/Ed1 IEC:2021 – 4 – 86B/4549/CDV
58 INTERNATIONAL ELECTROTECHNICAL COMMISSION
59 ____________
61 FIBRE OPTIC INTERCONNECTING DEVICES
62 AND PASSIVE COMPONENTS –
63 FIBRE OPTIC CONNECTOR INTERFACES –
65 Part 36: Type SAC connector family
69 FOREWORD
70 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
71 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
72 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
73 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
74 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
75 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
76 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
77 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
78 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
79 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
80 consensus of opinion on the relevant subjects since each technical committee has representation from all
81 interested IEC National Committees.
82 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
83 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
84 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
85 misinterpretation by any end user.
86 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
87 transparently to the maximum extent possible in their national and regional publications. Any divergence between
88 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
89 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
90 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
91 services carried out by independent certification bodies.
92 6) All users should ensure that they have the latest edition of this publication.
93 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
94 members of its technical committees and IEC National Committees for any personal injury, property damage or
95 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
96 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
97 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
98 indispensable for the correct application of this publication.
99 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
100 rights. IEC shall not be held responsible for identifying any or all such patent rights.
101 International Standard IEC 61754-36 has been prepared by subcommittee 86B: Fibre optic
102 interconnecting devices and passive components, of IEC technical committee 86B: Fibre Optics.
103 The text of this International Standard is based on the following documents:
FDIS Report on voting
86B/XX/FDIS 86B/XX/RVD
105 Full information on the voting for the approval of this International Standard can be found in the
106 report on voting indicated in the above table.
oSIST prEN 61754-36:2022
IEC CDV 61754-36/Ed1 IEC:2021 – 5 – 86B/4549/CDV
107 This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
108 The committee has decided that the contents of this document will remain unchanged until the
109 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
110 the specific document. At this date, the document will be
111 • reconfirmed,
112 • withdrawn,
113 • replaced by a revised edition, or
114 • amended.
oSIST prEN 61754-36:2022
IEC CDV 61754-36/Ed1 IEC:2021 – 6 – 86B/4549/CDV
115 INTRODUCTION
116 The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed
117 that compliance with this document may involve the use of patent concerning IEC 61754-36.
118 IEC takes no position concerning the evidence, validity and scope of this patent right.
119 The holder of this patent right has assured the IEC that he/she is willing to negotiate licenses
120 under reasonable and non-discriminatory terms and conditions with applicants throughout the
121 world. In this respect, the statement of the holder of this patent right is registered with IEC.
122 Information may be obtained from:
123 SENKO Advanced Components, Inc.
124 450 Donald Lynch Blvd – D, Marlborough, MA 01752
126 Attention is drawn to the possibility that some of the elements of this document may be the
127 subject of patent rights other than those identified above. IEC shall not be held responsible for
128 identifying any or all such patent rig
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.