SIST EN 13274-1:2001
(Main)Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage
Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage
This draft European Standard specifies the general procedure for determining: (i) the inward leakage of facepieces or (ii) inward leakage of respiratory protective devices (RPD), which is the total inward leakage excluding any filter penetration or (iii) total inward leakage of respiratory protective devices. Sample preparation, selection of test subjects, test procedure and the method of calculation of leakage are included. Two methods are described, one using an aerosol (sodium chloride aerosol) and one using a gas (sulfur hexafluoride).
Atemschutzgeräte - Prüfverfahren - Teil 1: Bestimmung der nach innen gerichteten Leckage und der gesamten nach innen gerichteten Leckage
Appareils de protection respiratoire - Méthodes d'essai - Partie 1: Détermination de la fuite vers l'intérieur et de la fuite totale vers l'intérieur
Oprema za varovanje dihal - Metode preskušanja - 1. del: Ugotavljanje prepuščanja v notranjost in celotnega prepuščanja v notranjost
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13274-1:2001
01-december-2001
2SUHPD]DYDURYDQMHGLKDO0HWRGHSUHVNXãDQMDGHO8JRWDYOMDQMHSUHSXãþDQMD
YQRWUDQMRVWLQFHORWQHJDSUHSXãþDQMDYQRWUDQMRVW
Respiratory protective devices - Methods of test - Part 1: Determination of inward
leakage and total inward leakage
Atemschutzgeräte - Prüfverfahren - Teil 1: Bestimmung der nach innen gerichteten
Leckage und der gesamten nach innen gerichteten Leckage
Appareils
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.