M/BC/CEN/88/7 - PPE: Respiratory tract protec.

This document specifies particle filters for use as replaceable components in unassisted respiratory protective devices with the exception of escape devices and filtering facepieces.
Laboratory tests are included for the assessment of compliance with the requirements.
Some filters complying with this document can also be suitable for use with other types of respiratory protective devices and/or escape devices. If so, they need to be tested and marked according to the appropriate European Standard.

This document specifies standard threads for respiratory protective devices and the description of test devices necessary for the assessment of some of the requirements.
This document does not apply to diving equipment and to positive pressure demand breathing apparatus.

This document specifies standard threads for respiratory protective devices and the description of test devices necessary for the assessment of some of the requirements.
This document does not apply to diving equipment and to positive pressure demand breathing apparatus.

This document specifies particle filters for use as replaceable components in unassisted respiratory protective devices (RPD) with the exception of escape devices and filtering face pieces.
Laboratory tests are included for the assessment of compliance with the requirements.
Some filters complying with this document can also be suitable for use with other types of respiratory protective devices and/or escape devices. If so, they need to be tested and marked according to the appropriate European Standard.
This document does not cover requirements concerning respiratory hygiene. Requirements for decrease of the microbiological hazards caused by the growth of bacteria and viruses on the filtration material are not determined.

This European Standard specifies minimum performance requirements for self-contained open-circuit compressed air breathing apparatus with full face mask used as respiratory protective devices, except escape apparatus and diving apparatus.
Such equipment is intended for use in work situations where the risk on over pressurisation of the pressure vessels with their valves due to hot environmental conditions is low.
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard specifies minimum performance requirements for self-contained open-circuit compressed air breathing apparatus with full face mask used as respiratory protective devices, except escape apparatus and diving apparatus.
Such equipment is intended for use in work situations where the risk on over pressurisation of the pressure vessels with their valves due to hot environmental conditions is low.
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This document refers to filtering devices designed for protection against carbon monoxide (filter self-rescuer). It specifies minimum requirements for filter self-rescuers. This document does not apply to apparatus for work and rescue or to diving apparatus. Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This document refers to filtering devices designed for protection against carbon monoxide (filter self-rescuer). It specifies minimum requirements for filter self-rescuers. This document does not apply to apparatus for work and rescue or to diving apparatus. Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard refers to filtering devices with a hood for personal escape from particulate matter, carbon monoxide and other toxic gases produced by fire. It specifies minimum requirements for this device which is for single use. It does not cover devices designed for use in circumstances where there is or might be an oxygen deficiency (oxygen less than 17 % by volume).
Two types of devices are specified; namely, those designed to be carried on the person and those designed to be stored.
This standard specifies devices primarily designed for adult users. Some devices may not be suitable for children.
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard refers to filtering devices with a hood for personal escape from particulate matter, carbon monoxide and other toxic gases produced by fire. It specifies minimum requirements for this device which is for single use. It does not cover devices designed for use in circumstances where there is or might be an oxygen deficiency (oxygen less than 17 % by volume).
Two types of devices are specified; namely, those designed to be carried on the person and those designed to be stored.
This standard specifies devices primarily designed for adult users. Some devices may not be suitable for children.
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard specifies minimum requirements for lung governed demand self-contained open-circuit compressed air breathing apparatus for escape.
This European Standard does not apply to apparatus for work and rescue or to diving apparatus.
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard specifies minimum requirements for lung governed demand self-contained open-circuit compressed air breathing apparatus for escape.
This European Standard does not apply to apparatus for work and rescue or to diving apparatus.
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard refers to mouthpiece assemblies for respiratory protective devices, except escape apparatus and diving apparatus.
It specifies minimum requirements for mouthpiece assemblies for use as part of respiratory protective devices.
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard refers to mouthpiece assemblies for respiratory protective devices, except escape apparatus and diving apparatus.
It specifies minimum requirements for mouthpiece assemblies for use as part of respiratory protective devices.
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

TC - Correction requested by TC

TC - Correction requested by TC

This European Standard specifies minimum requirements for half masks and quarter masks for use as part of respiratory protective devices, except escape apparatus and diving apparatus.  Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard is applicable to centre threads for respiratory protective devices. This standard does not apply to diving equipment and to positive pressure demand breathing apparatus.

This European Standard is applicable to self-contained compressed air breathing apparatus designed as positive pressure breathing apparatus.  This European Standard specifies a thread connection, M 45 x 3, which may optionally be used for facepieces for positive pressure breathing apparatus.  This European Standard does not apply to negative pressure breathing apparatus, to closed-circuit breathing apparatus or to diving equipment.

This European Standard is applicable to self-contained compressed air breathing apparatus designed as positive pressure breathing apparatus.  This European Standard specifies a thread connection, M 45 x 3, which may optionally be used for facepieces for positive pressure breathing apparatus.  This European Standard does not apply to negative pressure breathing apparatus, to closed-circuit breathing apparatus or to diving equipment.

This European Standard is applicable to centre threads for respiratory protective devices. This standard does not apply to diving equipment and to positive pressure demand breathing apparatus.

This European Standard specifies minimum requirements for half masks and quarter masks for use as part of respiratory protective devices, except escape apparatus and diving apparatus.  Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard specifies minimum requirements for powered fresh air hose breathing apparatus incorporating a hood as a respiratory protective device. Two classes of apparatus are covered, the differentiation resulting from mechanical performance and not respiratory protection.   Escape and diving apparatus and that used in abrasive blasting operations are not covered by this standard.  Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard specifies minimum requirements for fresh air hose breathing apparatus for use with a full face mask, a half mask or mouthpiece assembly as a respiratory protective device.  Two classes of apparatus are covered; the differentiation resulting from mechanical performance and not respiratory protection.  Escape and diving apparatus and that used in abrasive blasting operations are not covered by this standard.    Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard specifies minimum requirements for fresh air hose breathing apparatus for use with a full face mask, a half mask or mouthpiece assembly as a respiratory protective device.  Two classes of apparatus are covered; the differentiation resulting from mechanical performance and not respiratory protection.  Escape and diving apparatus and that used in abrasive blasting operations are not covered by this standard.    Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard specifies minimum requirements for powered fresh air hose breathing apparatus incorporating a hood as a respiratory protective device. Two classes of apparatus are covered, the differentiation resulting from mechanical performance and not respiratory protection.   Escape and diving apparatus and that used in abrasive blasting operations are not covered by this standard.  Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

TC - Modification of key to Figure 3

This European Standard specifies particle filters for use as components in unassisted respiratory protective devices with the exception of escape apparatus and filtering facepieces.  Laboratory tests are included for the assessment of compliance with the requirements.  Some filters complying with this European Standard may also be suitable for use with other types of respiratory protective devices and, if so, shall be tested and marked according to the appropriate European Standard.

This European Standard is applicable to standard threads for respiratory protective devices. This standard does not apply to diving equipment and to positive pressure demand breathing apparatus.

This European Standard is applicable to standard threads for respiratory protective devices. This standard does not apply to diving equipment and to positive pressure demand breathing apparatus.

This European Standard applies to the connection between a gas cylinder valve and a gas cylinder for respiratory protective devices.
It specifies the dimensions and tolerances for thread connections to be used for respiratory protective devices and contains requirements for impact resistance for the connection between a gas cylinder and a gas cylinder valve.

Due to dangerous situations it was decided to remove the 10 year transitional period contained in EN 144-1:2000.

This European Standard applies to the connection between a gas cylinder valve and a gas cylinder for respiratory protective devices.
It specifies the dimensions and tolerances for thread connections to be used for respiratory protective devices and contains requirements for impact resistance for the connection between a gas cylinder and a gas cylinder valve.

This European Standard is applicable to a thread connection used for the connection between a gas cylinder valve and a pressure reducer for respiratory protective devices except those for diving containing breathable air, oxygen or oxygen/nitrogen. It specifies the dimensions and tolerances for connections which are used for respiratory protective devices.

This European Standard applies to the connection between a gas cylinder valve and a gas cylinder for respiratory protective devices.
It specifies the dimensions and tolerances for thread connections to be used for respiratory protective devices and contains requirements for impact resistance for the connection between a gas cylinder and a gas cylinder valve.

Due to dangerous situations it was decided to remove the 10 year transitional period contained in EN 144-1:2000.

This European Standard applies to the connection between a gas cylinder valve and a gas cylinder for respiratory protective devices.
It specifies the dimensions and tolerances for thread connections to be used for respiratory protective devices and contains requirements for impact resistance for the connection between a gas cylinder and a gas cylinder valve.

This European Standard is applicable to a thread connection used for the connection between a gas cylinder valve and a pressure reducer for respiratory protective devices except those for diving containing breathable air, oxygen or oxygen/nitrogen. It specifies the dimensions and tolerances for connections which are used for respiratory protective devices.

This European Standard classifies respiratory protective devices (RPD) according to their basic design, i.e. a general logical grouping of the RPD.
This European standard is intended to serve as a basic introductory reference for users and for the preparation and revision of European Standards on respiratory protective devices.

This European Standard classifies respiratory protective devices (RPD) according to their basic design, i.e. a general logical grouping of the RPD.
This European standard is intended to serve as a basic introductory reference for users and for the preparation and revision of European Standards on respiratory protective devices.

This European Standard applies to self-contained open-circuit compressed air underwater breathing apparatus and their sub-assemblies. The object of the requirements and tests set out in this European Standard is to ensure a minimum level of safe operation for apparatus to a maximum depth of 50 m. Labo ratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard applies to self-contained open-circuit compressed air underwater breathing apparatus and their sub-assemblies. The object of the requirements and tests set out in this European Standard is to ensure a minimum level of safe operation for apparatus to a maximum depth of 50 m. Labo ratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard specifies minimum requirements for filtering half masks as respiratory protective devices to protect against particles except for escape purposes.  Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard specifies the performance requirements, test methods and marking requirements for valved filtering half masks incorporating either gas or combined filters as respiratory protective devices except for escape purposes. It does not cover gas filtering half masks which do not have valves or are fitted only with exhalation valves. It does not cover devices designed for use in circumstances where there is or might be an oxygen deficiency (oxygen less than a volume fraction of 17 %).
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard specifies the performance requirements, test methods and marking requirements for valved filtering half masks incorporating either gas or combined filters as respiratory protective devices except for escape purposes. It does not cover gas filtering half masks which do not have valves or are fitted only with exhalation valves. It does not cover devices designed for use in circumstances where there is or might be an oxygen deficiency (oxygen less than a volume fraction of 17 %).
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard specifies minimum requirements for filtering half masks as respiratory protective devices to protect against particles except for escape purposes.  Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

This European Standard refers to gas filters and combined filters for use as components in unassisted respiratory protective devices.
Filters for use against CO are excluded from this standard.
Laboratory tests are included for the assessment of compliance with the requirements.
Some filters complying with this standard can also be suitable for use with assisted respiratory protective devices and if so they need to be tested be tested and marked according to the appropriate European Standard

This European Standard refers to gas filters and combined filters for use as components in unassisted respiratory protective devices.
Filters for use against CO are excluded from this standard.
Laboratory tests are included for the assessment of compliance with the requirements.
Some filters complying with this standard can also be suitable for use with assisted respiratory protective devices and if so they need to be tested be tested and marked according to the appropriate European Standard