SIST EN 13126-13:2012
(Main)Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 13: Sash balances
Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 13: Sash balances
This European Standard specifies requirements and test methods for durability, strength, security and functionality of sash balances.
Baubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 13: Ausgleichgewichte für Vertikal-Schiebefenster
Diese Europäische Norm legt die Anforderungen und Prüfverfahren für die Dauerfunktionstüchtigkeit, Festigkeit, Schutzwirkung und Funktionsweise von Ausgleichgewichten fest.
Quincaillerie pour le bâtiment - Ferrures de fenêtres et portes-fenêtres - Exigences et méthodes d'essai - Partie 13 : Contrepoids pour mécanismes à guillotine
La présente Norme européenne spécifie les exigences et les méthodes d'essai relatives à l’endurance, à la résistance, à la sécurité des biens et au fonctionnement des contrepoids pour mécanisme à guillotine.
Stavbno okovje - Okovje za okna in balkonska vrata - Zahteve in preskusne metode - 13. del: Ravnotežje drsnih oken
Ta evropski standard določa zahteve in preskusne metode za trajnost, trdnost, varnost ter funkcionalnost ravnotežja drsnih oken.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stavbno okovje - Okovje za okna in balkonska vrata - Zahteve in preskusne metode - 13. del: Ravnotežje drsnih okenBaubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 13: Ausgleichgewichte für Vertikal-SchiebefensterQuincaillerie pour le bâtiment - Ferrures de fenêtres et portes-fenêtres - Exigences et méthodes d'essai - Partie 13 : Contrepoids pour mécanismes à guillotineBuilding hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 13: Sash balances91.190Stavbna opremaBuilding accessoriesICS:Ta slovenski standard je istoveten z:EN 13126-13:2012SIST EN 13126-13:2012en,fr,de01-julij-2012SIST EN 13126-13:2012SLOVENSKI
STANDARDSIST-TS CEN/TS 13126-13:20051DGRPHãþD
SIST EN 13126-13:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13126-13
May 2012 ICS 91.190 Supersedes CEN/TS 13126-13:2004English Version
Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 13: Sash balances
Quincaillerie pour le bâtiment - Ferrures de fenêtres et portes-fenêtres - Exigences et méthodes d'essai - Partie 13 : Contrepoids pour mécanismes à guillotine
Baubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 13: Ausgleichgewichte für Vertikal-Schiebefenster This European Standard was approved by CEN on 23 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13126-13:2012: ESIST EN 13126-13:2012
EN 13126-13:2012 (E) 2 Contents Page Foreword .31 Scope .62 Normative references .63 Terms and definitions .64 Classification .64.1 General .64.2 Category of use (1 – first digit) .64.3 Durability (2 – second digit) .64.4 Mass (3 – third digit) .74.5 Fire resistance (4 – fourth digit) .74.6 Safety in use (5 – fifth digit) .74.7 Corrosion resistance (6 – sixth digit) .74.8 Security (7 – seventh digit) .74.9 Application (8 – eighth digit) .74.10 Test Sizes (9 – ninth digit) .74.11 Example of classification for sash balances .85 Requirements .85.1 General .85.2 Integrated maximum opening stop .85.3 Free movement test .85.4 Durability test .95.5 Resistance to manually applied load test .95.6 Corrosion resistance test .96 Test apparatus .96.1 Sash balances installed in the test specimen .96.2 Test specimens from the sash balance manufacturer. 106.3 Test rig . 106.4 Hardware . 107 Test methods . 107.1 Samples . 107.2 Free movement test procedure . 107.3 Durability test procedure . 107.4 Resistance to manually applied load test procedure. 11Annex A (normative)
Test method diagrams . 12Annex B (normative)
Flow Chart of test procedure . 13Bibliography . 14 SIST EN 13126-13:2012
EN 13126-13:2012 (E) 3 Foreword This document (EN 13126-13:2012) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2012, and conflicting national standards shall be withdrawn at the latest by November 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN/TS 13126-13:2004. The following is a list of the technical changes made since the previous edition of this standard, organised according to their relevant clauses: a) Clause 3, Terms and definitions: 1) Reduced to two definitions, 3.1 and 3.2; b) Clause 4, Classification: 1) Three new grades added as per Table 2 in 4.9; 2) Window test sizes specified within EN 13126-13 as per Table 1 in 4.10; 3) Example of classification added in 4.11; c) Clause 5, Requirements: 1) Requirements in the whole of Clause 5: completely revised; 2) New test procedures added: i) Integrated maximum opening stop in 5.2; ii) Free movement test in 5.3; iii) Durability test in 5.4; iv) Resistance to manually applied load test in 5.5 and 3 new grades added; v) Corrosion resistance test in 5.6; d) Clause 6, Test apparatus: 1) Requirements in the whole of Clause 6: completely revised; e) Clause 7, Test methods: 1) Test methods in the whole of Clause 7: completely revised; 2) Reduction in the number of test samples in 7.1. SIST EN 13126-13:2012
EN 13126-13:2012 (E) 4 A full contribution to the preparation of this European Standard has been made by the European manufacturers´ organisation ‘ARGE’ and National Standards institutions. This European Standard is one of a series of European Standards for building hardware products. It is divided into seventeen parts to incorporate all types of windows and balcony doors: EN 13126-1, Building hardware Hardware for windows and door height windows Requirements and test methods Part 1: Requirements common to all types of hardware; EN 13126-2, Building hardware Requirements and test methods for windows and doors height windows Part 2: Window fastener handles; EN 13126-3, Building hardware Hardware for windows and door-height windows Requirements and test methods Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware; EN 13126-4, Building hardware Requirements and test methods for windows and doors height windows Part 4: Espagnolettes; EN 13126-5, Building hardware Hardware for windows and door height windows Requirements and test methods Part 5: Devices that restrict the opening of windows and door height windows; EN 13126-6, Building hardware Requirements and test methods for windows and doors height windows Part 6: Variable geometry stay hinges (with or without a friction stay); EN 13126-7, Building hardware Requirements and test methods for windows and door height windows Part 7: Finger catches; EN 13126-8, Building hardware Requirements and test methods for windows and doors height windows Part 8: Tilt&Turn, Tilt-First and Turn-Only hardware; prEN 13126-9, Building hardware Hardware for windows and door height windows Requirements and test methods Part 9: Hardware for horizontal and vertical pivot windows; EN 13126-10, Building hardware Requirements and test methods for windows and doors height windows Part 10: Arm-balancing systems; EN 13126-11, Building hardware Requirements and test methods for windows and doors height windows Part 11: Top hung projecting reversible hardware; EN 13126-12, Building hardware Requirements and test methods for windows and doors height windows Part 12: Side hung projecting reversible hardware; EN 13126-13, Building hardware — Hardware for windows and balcony doors —Requirements and test methods Part 13: Sash balances; EN 13126-14, Building hardware — Hardware for windows and balcon
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.