SIST EN 10217-6:2003/A1:2005

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties

Modify the clause 9 Inspection and the Annex ZA in order to make them in line with the provision of Directive 97/23/EC (PED).

Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 6: Unterpulvergeschweißte Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei tiefen Temperaturen

Tubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 6: Tubes soudés a l'arc immergé en acier non allié avec caractéristiques spécifiées a basse température

Varjene jeklene cevi za tlačne posode - Tehnični dobavni pogoji - 6. del: Obločno pod praškom varjene nelegirane jeklene cevi s specificiranimi lastnostmi za delo pri nizkih temperaturah

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2005
• Withdrawal Date: 24-Apr-2019
• ICS: 23.020.32 - Pressure vessels
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 25-Apr-2019
• Due Date: 18-May-2019
• Completion Date: 25-Apr-2019
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 10217-6:2002/A1:2005 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties

Relations

• Revised: SIST EN 10217-6:2019 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
• Effective Date: 29-Jun-2016
• Amends: SIST EN 10217-6:2003 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
• Effective Date: 22-Dec-2008
• Amends: SIST EN 10217-6:2003 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10217-6:2003/A1:2005
01-marec-2005
9DUMHQHMHNOHQHFHYL]DWODþQHSRVRGH7HKQLþQLGREDYQLSRJRMLGHO2EORþQR
SRGSUDãNRPYDUMHQHQHOHJLUDQHMHNOHQHFHYLVVSHFLILFLUDQLPLODVWQRVWPL]DGHOR
SULQL]NLKWHPSHUDWXUDK
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6:
Submerged arc welded non-alloy steel tubes with specified low temperature properties
Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen -
Teil 6: Unterpulvergeschweißte Rohre aus unlegierten Stählen mit festgelegten
Eigenschaften bei tiefen Temperaturen
Tubes soudés en acier pour service sous pression - Conditions techniques de livraison -
Partie 6: Tubes soudés a l'arc immergé en acier non allié avec caractéristiques
spécifiées a basse température
Ta slovenski standard je istoveten z: EN 10217-6:2002/A1:2005
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 10217-6:2003/A1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 10217-6:2003/A1:2005

---------------------- Page: 2 ----------------------

SIST EN 10217-6:2003/A1:2005
EUROPEAN STANDARD
EN 10217-6:2002/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2005
ICS 23.040.10; 77.140.75
English version
Welded steel tubes for pressure purposes - Technical delivery
conditions - Part 6: Submerged arc welded non-alloy steel tubes
with specified low temperature properties
Tubes soudés en acier pour service sous pression - Geschweißte Stahlrohre für Druckbeanspruchungen -
Conditions techniques de livraison - Partie 6: Tubes soudés Technische Lieferbedingungen - Teil 6:
à l'arc immergé en acier non allié avec caractéristiques Unterpulvergeschweißte Rohre aus unlegierten Stählen mit
spécifiées à basse température festgelegten Eigenschaften bei tiefen Temperaturen
This amendment A1 modifies the European Standard EN 10217-6:2002; it was approved by CEN on 9 December 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10217-6:2002/A1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 10217-6:2003/A1:2005
EN 10217-6:2002/A1:2005 (E)
Contents
Page
Foreword.3
9 Inspection .4
9.1 Type of inspection .4
9.2 Inspection documents.4
9.2.1 Types of inspection documents.4
9.2.2 Content of inspection documents.4
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of 97/23/EC .5


2

---------------------- Page: 4 ----------------------

SIST EN 10217-6:2003/A1:2005
EN 10217-6:2002/A1:2005 (E)
Foreword
This document (EN 10217-6:2002/A1:2005) has been prepared by Technical Committee ECISS/TC 29 “Steel tubes
and fittings for steel tubes”, the secretariat of which is held by UNI.
This Amendment to the European Standard EN 10217-6:2002 shall be given the status of
...