SIST-TS CEN/TS 15639:2007
(Main)Solid recovered fuels - Methods for the determination of mechanical durability of pellets
Solid recovered fuels - Methods for the determination of mechanical durability of pellets
This document specifies test methods for the determination of the mechanical durability of pellets. It is intended to be applied by persons and organisations that manufacture, plan, sell, erect or use machinery, equipment, tools and entire plants related to such pellets, and that are involved in producing, purchasing, selling and utilising pellets.
The method is not applicable to soft pellets.
Feste Sekundärrohstoffe - Verfahren zur Bestimmung der mechanischen Festigkeit von Pellets
Méthodes pour la détermination de la résistance des briquettes et des granulés
Trdno alternativno gorivo – Metode za določevanje mehanske trdnosti peletov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 15639:2007
01-november-2007
7UGQRDOWHUQDWLYQRJRULYR±0HWRGH]DGRORþHYDQMHPHKDQVNHWUGQRVWLSHOHWRY
Solid recovered fuels - Methods for the determination of mechanical durability of pellets
Feste Sekundärrohstoffe - Verfahren zur Bestimmung der mechanischen Festigkeit von
Pellets
Méthodes pour la détermination de la résistance des briquettes et des granulés
Ta slovenski standard je istoveten z: CEN/TS 15639:2007
ICS:
75.160.10 Trda goriva Solid fuels
SIST-TS CEN/TS 15639:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
TECHNICAL SPECIFICATION
CEN/TS 15639
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
August 2007
ICS 75.160.10
English Version
Solid recovered fuels - Methods for the determination of
mechanical durability of pellets
Combustibles solides de récupération - Méthodes pour la Feste Sekundärbrennstoffe - Verfahren zur Bestimmung
détermination de la résistance des granulés der mechanischen Festigkeit von Pellets
This Technical Specification (CEN/TS) was approved by CEN on 23 July 2007 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15639:2007: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
CEN/TS 15639:2007 (E)
Contents page
Foreword.3
1 Scope.4
2 Normative references.4
3 Terms and definitions .4
4 Principle.5
5 Apparatus.5
6 Sampling and sample preparation.6
7 Procedure.7
8 Calculations.7
9 Test report.7
Bibliography .9
2
---------------------- Page: 3 ----------------------
CEN/TS 15639:2007 (E)
Foreword
This document (CEN/TS 15639:2007) has been prepared by Technical Committee CEN/TC 343 “Solid
recovered fuels”, the secretariat of which is held by SFS.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
3
---------------------- Page: 4 ----------------------
CEN/TS 15639:2007 (E)
1 Scope
This document specifies a test method for the determination of the mechanical durability of pellets. It is
intended to be applied by persons and organisations that manufacture, plan, sell, erect or use machinery,
equipment, tools and entire plants related to such pellets, and that are involved in producing, purchasing,
selling and utilising pellets.
The method is not applicable to soft pellets.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
CEN/TS 15357:2006, Solid recovered fuels — Terminology, definitions and descriptions
CEN/TS 15359, Solid recovered fuels — Specifications and classes
CEN/TS 15442, Solid recovered fuels — Methods for sampling
CEN/TS 1544
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.