oSIST prEN 4641-103:2023
(Main)Aerospace series - Cables, optical 125 μm diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5/125 µm GI fibre nominal 2,74 mm, outside diameter - Product standard
Aerospace series - Cables, optical 125 μm diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5/125 µm GI fibre nominal 2,74 mm, outside diameter - Product standard
This document specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 62,5 µm/125 µm simplex fibre, 2,74 mm outside cable diameter and of semi-loose construction. The basic construction is the cable defined in EN 4641 102 with added sheaths for ruggedized usages.
Luft- und Raumfahrt - Lichtwellenleiterkabel, Claddingdurchmesser 125 µm - Teil 103: Halbfester Leiteraufbau, widerstandsfähige Simplexkonstruktion GI 62,5 µm/125 µm Faser, Kabelaußendurchmesser 2,74 mm - Produktnorm
Série aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 µm - Partie 103 : Câble à structure semi libre, renforcée, monovoie fibre à gradient d'indice 62,5 µm/125 µm, diamètre extérieur 2,74 mm - Norme de produit
Le présent document spécifie les caractéristiques générales ainsi que les conditions de qualification, de réception et d'assurance qualité pour un câble à fibre optique avec une fibre simplex à gradient d'indice 62,5 µm/125 µm, un diamètre extérieur de 2,74 mm et une structure semi-libre. La construction basique est le câble défini dans l’EN 4641-102 avec des gaines en plus pour des usages renforcés.
Aeronavtika - Kabli, optični, zunanji premer obloge 125 µm - 103. del: Poltrdi kabli lahke izvedbe 62,5/125 µm GI, zunanji premer vlakna 2,74 mm - Standard za izdelek
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 4641-103:2023
01-september-2023
Aeronavtika - Kabli, optični, zunanji premer obloge 125 µm - 103. del: Poltrdi kabli
lahke izvedbe 62,5/125 µm GI, zunanji premer vlakna 2,74 mm - Standard za izdelek
Aerospace series - Cables, optical 125 μm diameter cladding - Part 103: Semi-loose,
ruggedized simplex construction 62,5/125 µm GI fibre nominal 2,74 mm, outside
diameter - Product standard
Luft- und Raumfahrt - Lichtwellenleiterkabel, Claddingdurchmesser 125 µm - Teil 103:
Halbfester Leiteraufbau, widerstandsfähige Simplexkonstruktion GI 62,5 µm/125 µm
Faser, Kabelaußendurchmesser 2,74 mm - Produktnorm
Série aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 µm -
Partie 103 : Câble à structure semi libre, renforcée, monovoie fibre à gradient d'indice
62,5 µm/125 µm, diamètre extérieur 2,74 mm - Norme de produit
Ta slovenski standard je istoveten z: prEN 4641-103
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
49.090 Oprema in instrumenti v On-board equipment and
zračnih in vesoljskih plovilih instruments
oSIST prEN 4641-103:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4641-103:2023
---------------------- Page: 2 ----------------------
oSIST prEN 4641-103:2023
DRAFT
EUROPEAN STANDARD
prEN 4641-103
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2023
ICS 49.090 Will supersede EN 4641-103:2010
English Version
Aerospace series - Cables, optical 125 µm diameter
cladding - Part 103: Semi-loose, ruggedized simplex
construction 62,5/125 µm GI fibre nominal 2,74 mm,
outside diameter - Product standard
Série aérospatiale - Câble, optique, diamètre extérieur Luft- und Raumfahrt - Lichtwellenleiterkabel,
de la gaine optique 125 µm - Partie 103 : Câble à Claddingdurchmesser 125 µm - Teil 103: Halbfester
structure semi libre, renforcée, monovoie fibre à Leiteraufbau, widerstandsfähige Simplexkonstruktion
gradient d'indice 62,5 µm/125 µm, diamètre extérieur GI 62,5 µm/125 µm Faser, Kabelaußendurchmesser
2,74 mm - Norme de produit 2,74 mm - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4641-103:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4641-103:2023
prEN 4641-103:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 6
4 Required characteristics . 6
5 Cable construction . 6
6 Materials . 7
7 Test methods and performances in accordance with EN 3745-100 . 7
7.1 Optical fibre tests . 7
7.2 Fibre optic component cable tests . 7
7.3 Ruggedized fibre optic cable . 7
8 Tooling . 12
9 Quality assurance . 12
10 Designation, marking and colours . 13
10.1 Designation . 13
10.2 Marking . 13
10.3 Colours . 13
11 Delivery conditions . 13
11.1 Packaging . 13
11.2 Labelling . 13
11.3 Delivery lengths. 13
12 Storage . 13
Annex A (informative) Standard evolution form . 14
Bibliography . 15
2
---------------------- Page: 4 ----------------------
oSIST prEN 4641-103:2023
prEN 4641-103:2023 (E)
European foreword
This document (prEN 4641-103:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 4641-103:2010.
The main changes with respect to the previous edition are as follows:
— EN 4641-103 (P1), 11/2010 — Editorial improvements and update of the scope to change “single
mode fibre core” to “simplex fibre”.
3
---------------------- Page: 5 ----------------------
oSIST prEN 4641-103:2023
prEN 4641-103:2023 (E)
1 Scope
This document specifies the general characteristics, conditions for qualification, acceptance and quality
assurance for a fibre optic cable with a 62,5 µm/125 µm simplex fibre, 2,74 mm outside cable diameter
and of semi-loose construction. The basic construction is the cable defined in EN 4641-102 with added
sheaths for ruggedized usages.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2424, Aerospace series - Marking of aerospace products
EN 2812, Aerospace series - Stripping of electric cables
EN 3475-601, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density
EN 3475-602, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity
EN 3745-100, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 100: General
EN 3745-201, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 201: Visual
examination
EN 3745-203, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 203: Cable
dimensions
EN 3745-205, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 205: Cable
longitudinal dimensional stability
EN 3745-301, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301:
Attenuation
EN 3745-306, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306:
Variation of attenuation during temperature cycling
EN 3745-402, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402:
Temperature cycling
EN 3745-404, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal
shock
EN 3745-406, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold
bend test
EN 3745-407, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407:
Flammability
EN 3745-503, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape
abrasion
4
---------------------- Page: 6 ----------------------
oSIST prEN 4641-103:2023
prEN 4641-103:2023 (E)
EN 3745-505, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable
tensile strength
EN 3745-506, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 506: Impact
resistance
EN 3745-507, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 507: Cut-
through
EN 3745-508, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 508: Torsion
EN 3745-509, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 509: Kink test
EN 3745-510, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending
test
EN 3745-511, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 511: Cable to
cable abrasion
EN 3745-512, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure
endurance
EN 3745-513, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush
resistance
EN 3745-516, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 516: Severe
cable bend test
EN 3745-517, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie
clamping test
EN 3745-601, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke
density
EN 3745-602, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 602: Toxicity
EN 3745-701, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 701:
Strippability
EN 3745-703, Aerospace series - Fibres and cables, optical, aircraft u
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.