SIST EN 4641-103:2011

Aerospace series - Cables, optical 125 μm diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5/125 μm GI fibre nominal 2,74 mm, outside diameter - Product standard

This product standard specifies the general characteristics, conditions for qualification, acceptance and quality
assurance for a fibre optic cable with a 62,5/125 µm single mode fibre core, 2,74 mm outside cable diameter
and of semi-loose construction. The basic construction is the cable defined in EN 4641-102 with added
sheaths for ruggedized usages.

Luft- und Raumfahrt - Lichtwellenleiterkabel, Claddingdurchmesser 125 µm - Teil 103: Halbfester Leiteraufbau GI 62,5/125 µm, Faser Kabelaußendurchmesser 2,74 mm - Produktnorm

Diese Norm legt die allgemeinen Eigenschaften, Bedingungen für Qualifikation, Abnahme und Qualitätssicherung
für ein Lichtwellenleiterkabel mit einem 62,5/125 μm Einmodenfaserkern, Kabelaußendurchmesser
2,74 mm und halbfestem Leiteraufbau, fest. Die Grundkonstruktion ist das in EN 4641-102 festgelegte Kabel
mit zusätzlichen Mänteln für widerstandsfähige Anwendungen.

Série aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 µm - Partie 103 : Câble à structure semi libre, renforcée, monovoie fibre à gradient d'indice 62,5/125 µm, diamètre extérieur 2,74 mm - Norme de produit

Aeronavtika - Kabli, optični, zunanji premer obloge 125 µm - 103. del: Poltrdi kabli lahke izvedbe 62,5/125 µm GI, zunanji premer vlakna 2,74 mm - Standard za izdelek

Ta standard za proizvod določa glavne značilnosti, kvalifikacijske pogoje ter zagotavljanje sprejemljivosti in kakovosti za optični kabel z enim vlaknenim jedrom s 62,5/125 µm GI, z 2,74 mm zunanjim premerom vlakna in poltrde konstrukcije. Osnovna konstrukcija je kabel z dodanimi tulci za robustne uporabe, opredeljen v EN 4641-102.

General Information

• Status: Published
• Publication Date: 23-Oct-2011
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 14-Oct-2011
• Due Date: 19-Dec-2011
• Completion Date: 24-Oct-2011
• Ref Project: EN 4641-103:2010 - Aerospace series - Cables, optical 125 μm diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5/125 μm GI fibre nominal 2,74 mm, outside diameter - Product standard

Relations

• Revised: oSIST prEN 4641-103:2023 - Aerospace series - Cables, optical 125 μm diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5/125 µm GI fibre nominal 2,74 mm, outside diameter - Product standard
• Effective Date: 28-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Lichtwellenleiterkabel, Claddingdurchmesser 125 µm - Teil 103: Halbfester Leiteraufbau GI 62,5/125 µm, Faser Kabelaußendurchmesser 2,74 mm - ProduktnormSérie aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 µm - Partie 103 : Câble à structure semi libre, renforcée, monovoie fibre à gradient d'indice 62,5/125 µm, diamètre extérieur 2,74 mm - Norme de produit49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4641-103:2010SIST EN 4641-103:2011en01-december-2011SIST EN 4641-103:2011SLOVENSKI
STANDARD



SIST EN 4641-103:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4641-103
November 2010 ICS 49.090 English Version
Aerospace series - Cables, optical 125 µm diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5/125 µm GI fibre nominal 2,74 mm, outside diameter - Product standard
Série aérospatiale - Câble, optique, diamètre extérieur de la gaine optique 125 µm - Partie 103 : Câble à structure semi libre, renforcée, monovoie fibre à gradient d'indice 62,5/125 µm, diamètre extérieur 2,74 mm - Norme de produit
Luft- und Raumfahrt - Lichtwellenleiterkabel, Claddingdurchmesser 125 µm - Teil 103: Halbfester Leiteraufbau GI 62,5/125 µm, Faser Kabelaußendurchmesser 2,74 mm - Produktnorm This European Standard was approved by CEN on 2 July 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4641-103:2010: ESIST EN 4641-103:2011



EN 4641-103:2010 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Required characteristics .45 Cable construction .56 Materials .57 Test methods and performances in accordance with EN 3745-100 .67.1 Optical fibre tests.67.2 Fibre optic component cable tests .67.3 Ruggedized fibre optic cable .68 Tooling . 109 Quality assurance . 1010 Designation, marking and colours . 1010.1 Designation . 1010.2 Marking . 1110.3 Colours . 1111 Delivery conditions . 1111.1 Packaging . 1111.2 Labelling . 1111.3 Delivery lengths . 1112 Storage . 11 SIST EN 4641-103:2011



EN 4641-103:2010 (E) 3 Foreword This document (EN 4641-103:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the latest by May 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 4641-103:2011



EN 4641-103:2010 (E) 4 1 Scope This product standard specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 62,5/125 µm single mode fibre core, 2,74 mm outside cable diameter and of semi-loose construction. The basic construction is the cable defined in EN 4641-102 with added sheaths for ruggedized usages. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series — Marking of aerospace products EN 2812, Aerospace series — Stripping of electrical cables 1) EN 3475-601, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 601: Smoke density EN 3475-602, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 602: Toxicity EN 3745-100, Aerospace series — Fibres and cables, optical, aircraft use — Test methods — Part 100: General EN 3838, Aerospace series — Requirements and tests on user-applied markings on aircraft electrical cables 1) EN 3909, Aerospace series — Test fluids for electric components and sub-assemblies EN 4641-102, Aerospace series — Cables, optical 125 µm outside diameter cladding — Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter — Product standard EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace standard parts TR 4647, Aerospace series — Termination procedure for EN 4639 optical contact 2) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3745-100 apply. 4 Required characteristics The characteristics of the cables, tested according to the methods described hereafter shall comply with the values defined in this product standard.
1) Published as ASD-STAN Prestandard at the date of publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN), (www.asd-stan.org). 2) Published as ASD-STAN Technical Report at the date of publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN), (www.asd-stan.org). SIST EN 4641-103:2011



EN 4641-103:2010 (E) 5 5 Cable construction See Figure 1 and Table 1.
Key 1
...