SIST EN ISO 18314-3:2018
(Main)Analytical colorimetry - Part 3: Special indices (ISO 18314-3:2015)
Analytical colorimetry - Part 3: Special indices (ISO 18314-3:2015)
ISO 18314-3:2015 specifies different methods of calculating special indices, which are generally used to describe lightness respectively jetness of samples including chroma or hue within one colour-coordinate.
ISO 18314-3:2015 is applicable to tristimulus values and chromaticity coordinates calculated using colour-matching functions of the CIE 1964 standard colourimetric system. It can be used for the specification of colour stimuli perceived as belonging to a reflecting or transmitting object, where a one-dimensional value is required.
Analytische Farbmessung - Teil 3: Spezielle Indices (ISO 18314-3:2015)
Analyse colorimétrique - Partie 3: Indices spéciaux (ISO 18314-3:2015)
La présente partie de l'ISO 18314 spécifie les méthodes de calcul de plusieurs indices spéciaux, qui sont généralement employés pour décrire la clarté ou la profondeur du noir d'échantillons avec la saturation ou la teinte pour une coordonnée monochromatique.
La présente partie de l'ISO 18314 est applicable aux composantes trichromatiques et aux coordonnées trichromatiques calculées à l'aide de fonctions colorimétriques du système de référence colorimétrique CIE 1964. Elle peut être utilisée pour la spécification de stimulus de couleur se rapportant à des objets qui réfléchissent ou qui transmettent la lumière, pour lesquels une valeur unidimensionnelle est nécessaire.
Analizna kolorometrija - 3. del: Posebni indeksi (ISO 18314-3:2015)
ISO 18314-3:2015 določa različne metode izračunavanja posebnih indeksov, ki se običajno uporabljajo za opisovanje svetlosti oziroma temnosti vzorcev, vključno s kromatskimi lastnostmi ali odtenki znotraj ene barvne koordinate.
ISO 18314-3:2015 se uporablja za trikromatske vrednosti in kromatske koordinate, izračunane s funkcijami ujemanja barv v skladu s standardnim kolorimetričnim sistemom iz standarda CIE 1964. Uporablja se lahko za specifikacijo barvnih stimulov, dojetih kot refleksni ali oddajni predmeti, pri čemer je zahtevana enodimenzionalna vrednost.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 18314-3:2018
01-november-2018
Analizna kolorometrija - 3. del: Posebni indeksi (ISO 18314-3:2015)
Analytical colorimetry - Part 3: Special indices (ISO 18314-3:2015)
Analytische Farbmessung - Teil 3: Spezielle Indices (ISO 18314-3:2015)
Analyse colorimétrique - Partie 3: Indices spéciaux (ISO 18314-3:2015)
Ta slovenski standard je istoveten z: EN ISO 18314-3:2018
ICS:
17.180.20 Barve in merjenje svetlobe Colours and measurement of
light
87.060.10 Pigmenti in polnila Pigments and extenders
SIST EN ISO 18314-3:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 18314-3:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 18314-3:2018
EN ISO 18314-3
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2018
EUROPÄISCHE NORM
ICS 87.060.10
English Version
Analytical colorimetry - Part 3: Special indices (ISO 18314-
3:2015)
Analyse colorimétrique - Partie 3: Indices spéciaux Analytische Farbmessung - Teil 3: Spezielle Indices
(ISO 18314-3:2015) (ISO 18314-3:2015)
This European Standard was approved by CEN on 19 February 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18314-3:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 18314-3:2018
EN ISO 18314-3:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 18314-3:2018
EN ISO 18314-3:2018 (E)
European foreword
The text of ISO 18314-3:2015 has been prepared by Technical Committee 256 "Pigments, dyestuffs and
extenders”of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 18314-3:2018 by Technical Committee CEN/TC 298 “Pigments and extenders” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18314-3:2015 has been approved by CEN as EN ISO 18314-3:2018 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 18314-3:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 18314-3:2018
INTERNATIONAL ISO
STANDARD 18314-3
First edition
2015-06-01
Analytical colorimetry —
Part 3:
Special indices
Analyse colorimétrique —
Partie 3: Indices spéciaux
Reference number
ISO 18314-3:2015(E)
©
ISO 2015
---------------------- Page: 7 ----------------------
SIST EN ISO 18314-3:2018
ISO 18314-3:2015(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 18314-3:2018
ISO 18314-3:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Symbols and abbreviated terms . 1
3 Whiteness index . 2
3.1 CIE whiteness index . 2
4 Yellowness index . 2
5 Black values . 2
5.1 Black value, M .
Y 2
5.2 Colour depending black value, M .
C 2
5.3 Absolute contribution of hue, dM .2
5.4 Relative black value, Myr .3
6 Grey values. 3
6.1 Grey value, G .
Y 3
6.2 Colour depending grey value, G .
C 3
6.3 Absolute contribution of hue, dG .3
6.4 Relative grey value, Gyr . 3
7 Flop-index . 4
Annex A (informative) Considerations regarding black values . 5
Bibliography . 6
© ISO 2015 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 18314-3:2018
ISO 18314-3:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been
...
SLOVENSKI STANDARD
oSIST prEN ISO 18314-3:2017
01-december-2017
Analizna kolorometrija - 3. del: Posebni indeksi (ISO 18314-3:2015)
Analytical colorimetry - Part 3: Special indices (ISO 18314-3:2015)
Analytische Farbmessung - Teil 3: Spezielle Indices (ISO 18314-3:2015)
Analyse colorimétrique - Partie 3: Indices spéciaux (ISO 18314-3:2015)
Ta slovenski standard je istoveten z: prEN ISO 18314-3
ICS:
17.180.20 Barve in merjenje svetlobe Colours and measurement of
light
87.060.10 Pigmenti in polnila Pigments and extenders
oSIST prEN ISO 18314-3:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 18314-3:2017
---------------------- Page: 2 ----------------------
oSIST prEN ISO 18314-3:2017
INTERNATIONAL ISO
STANDARD 18314-3
First edition
2015-06-01
Analytical colorimetry —
Part 3:
Special indices
Analyse colorimétrique —
Partie 3: Indices spéciaux
Reference number
ISO 18314-3:2015(E)
©
ISO 2015
---------------------- Page: 3 ----------------------
oSIST prEN ISO 18314-3:2017
ISO 18314-3:2015(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 18314-3:2017
ISO 18314-3:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Symbols and abbreviated terms . 1
3 Whiteness index . 2
3.1 CIE whiteness index . 2
4 Yellowness index . 2
5 Black values . 2
5.1 Black value, M .
Y 2
5.2 Colour depending black value, M .
C 2
5.3 Absolute contribution of hue, dM .2
5.4 Relative black value, Myr .3
6 Grey values. 3
6.1 Grey value, G .
Y 3
6.2 Colour depending grey value, G .
C 3
6.3 Absolute contribution of hue, dG .3
6.4 Relative grey value, Gyr . 3
7 Flop-index . 4
Annex A (informative) Considerations regarding black values . 5
Bibliography . 6
© ISO 2015 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 18314-3:2017
ISO 18314-3:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 256, Pigments, dyestuffs and extenders.
ISO 18314 consists of the following parts, under the general title Analytical colorimetry:
— Part 1: Practical colour measurement
— Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding power
— Part 3: Special indices
iv © ISO 2015 – All rights reserved
---------------------- Page: 6 ---
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.