oSIST prEN ISO 3035:2024
(Main)Corrugated fibreboard - Determination of flat crush resistance (ISO/DIS 3035:2024)
Corrugated fibreboard - Determination of flat crush resistance (ISO/DIS 3035:2024)
This International Standard specifies a method for the determination of the flat crush resistance of corrugated fibreboard used in the manufacture of shipping containers.
This International Standard is applicable to single-faced and single-wall (double-faced) corrugated fibreboard.
This International Standard is not applicable to double-wall (double-double-faced) corrugated fibreboard and to microflute corrugated fibreboard, since the end-point of the test is not clearly defined or observable.
Wellpappe - Bestimmung des Flachstauchwiderstandes (ISO/DIS 3035:2024)
Carton ondulé - Détermination de la résistance à la compression à plat (ISO/DIS 3035:2024)
L'ISO 3035:2011 spécifie une méthode de détermination de la résistance à la compression à plat du carton ondulé utilisé dans la fabrication d'emballages d'expédition.
Elle est applicable au carton ondulé simple face et au carton ondulé simple cannelure (double face).
Elle n'est pas applicable au carton ondulé double cannelure (double-double face), ni au carton ondulé microcannelures, puisque le point final de l'essai n'est pas clairement défini ou observable.
Valoviti karton - Ugotavljanje ploskovne odpornosti (ISO/DIS 3035:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 3035:2024
01-junij-2024
Valoviti karton - Ugotavljanje ploskovne odpornosti (ISO/DIS 3035:2024)
Corrugated fibreboard - Determination of flat crush resistance (ISO/DIS 3035:2024)
Wellpappe - Bestimmung des Flachstauchwiderstandes (ISO/DIS 3035:2024)
Carton ondulé - Détermination de la résistance à la compression à plat (ISO/DIS
3035:2024)
Ta slovenski standard je istoveten z: prEN ISO 3035
ICS:
85.060 Papir, karton in lepenka Paper and board
oSIST prEN ISO 3035:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 3035:2024
---------------------- Page: 2 ----------------------
oSIST prEN ISO 3035:2024
DRAFT
International
Standard
ISO/DIS 3035
ISO/TC 6/SC 2
Corrugated fibreboard —
Secretariat: SIS
Determination of flat crush
Voting begins on:
resistance
2024-04-05
Carton ondulé — Détermination de la résistance à la compression
Voting terminates on:
à plat
2024-06-28
ICS: 85.080.30
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 3035:2024(en)
© ISO 2024
---------------------- Page: 3 ----------------------
oSIST prEN ISO 3035:2024
DRAFT
ISO/DIS 3035:2024(en)
International
Standard
ISO/DIS 3035
ISO/TC 6/SC 2
Corrugated fibreboard —
Secretariat: SIS
Determination of flat crush
Voting begins on:
resistance
Carton ondulé — Détermination de la résistance à la compression
Voting terminates on:
à plat
ICS: 85.080.30
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 3035:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii
---------------------- Page: 4 ----------------------
oSIST prEN ISO 3035:2024
ISO/DIS 3035:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.