Textiles - Dry-cleaning and finishing - Part 2: Procedures for tetrachloroethene (ISO 3175-2:1998)

Textilien - Chemischreinigung und Nachbehandlung - Prüfungen - Teil 2: Verfahren für Perchlorethylen (Tetrachlorethen) (ISO 3175-2:1998)

Dieser Teil von ISO 3175 legt Verfahren der chemischen Reinigung für textile Flächengebilde und Kleidungsstücke mit Tetrachlorethen (Perchlorethylen) fest, bei denen Textilreinigungsmaschinen für gewerbliche Zwecke angewendet werden. Er enthält ein Verfahren für normale Textilien und Verfahren für empfindliche und sehr empfindliche Textilien.

Textiles - Nettoyage a sec et finition - Partie 2: Modes opératoires au tétrachloroéthylene (ISO 3175-2:1998)

Tekstilije - Kemično čiščenje in naknadna obdelava - 2. del: Postopki s tetrakloretilenom (ISO 3175-2:1998)

General Information

Status
Withdrawn
Publication Date
30-Jun-2000
Withdrawal Date
28-Aug-2013
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
28-Aug-2013
Due Date
20-Sep-2013
Completion Date
29-Aug-2013

Relations

Buy Standard

Standard
EN ISO 3175-2:2000
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3175-2:2000
01-julij-2000
1DGRPHãþD
SIST EN ISO 3175:1999
7HNVWLOLMH.HPLþQRþLãþHQMHLQQDNQDGQDREGHODYDGHO3RVWRSNLV
WHWUDNORUHWLOHQRP ,62
Textiles - Dry-cleaning and finishing - Part 2: Procedures for tetrachloroethene (ISO 3175
-2:1998)
Textilien - Chemischreinigung und Nachbehandlung - Prüfungen - Teil 2: Verfahren für
Perchlorethylen (Tetrachlorethen) (ISO 3175-2:1998)
Textiles - Nettoyage a sec et finition - Partie 2: Modes opératoires au tétrachloroéthylene
(ISO 3175-2:1998)
Ta slovenski standard je istoveten z: EN ISO 3175-2:1998
ICS:
59.080.01 Tekstilije na splošno Textiles in general
SIST EN ISO 3175-2:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3175-2:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 3175-2:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 3175-2:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 3175-2:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 3175-2:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 3175-2:2000
INTERNATIONAL ISO
STANDARD 3175-2
First edition
1998-08-15
Textiles — Dry cleaning and finishing —
Part 2:
Procedures for tetrachloroethene
Textiles — Nettoyage à sec et finition —
Partie 2: Modes opératoires au tétrachloroéthylène
A
Reference number
ISO 3175-2:1998(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 3175-2:2000
ISO 3175-2:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 3175-2 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 2,
Cleansing, finishing and water resistance tests.
ISO 3175 consists of the following parts, under the general title Textiles — Dry cleaning and finishing:
— Part 1: Method for assessing the cleanability of textiles and garments
— Part 2: Procedures for tetrachloroethene
— Part 3: Procedures for hydrocarbon solvents (under development)
— Part 4: Procedure for wet cleaning systems (under development)
Annex A of this part of ISO 3175 is for information only.
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 3175-2:2000
© ISO
ISO 3175-2:1998(E)
Introduction
Dry cleaning is a process for cleaning textiles in an organic solvent that dissolves oils and fats and disperses
particulate dirt substantially without the swelling and creasing associated with washing or wet cleaning. Small
quantities of water may be incorporated in the solvent with the aid of a surfactant for the purpose of obtaining better
soil and stain removal. Some moisture-sensitive articles are preferably dry cleaned without the addition of water to
the solvent. A surfactant is often used to assist with soil removal and reduce the risk of greying, but it must be borne
in mind that surfactants contain varying amounts of water in their formulations.
Dry cleaning is normally followed by an appropriate restorative finishing procedure. In most cases, this comprises
some form of steam treatment and/or hot pressing.
Properties of the textile or garment may change progressively on dry cleaning and steaming and/or pressing and in
some cases a single treatment may give little indication of the extent of dimensional and other changes that may
arise after repeated treatments and which may affect the useful life of the article. Generally, most of the potential
change will become apparent after three to five of the dry cleaning and finishing treatments specified in this part of
ISO 3175.
The properties which should be considered in an assessment for dry-cleanability together with the methods for their
assessment are given in ISO 3175-1.
iii

---------------------- Page: 9 ----------------------

SIST EN ISO 3175-2:2000

---------------------- Page: 10 ----------------------

SIST EN ISO 3175-2:2000
INTERNATIONAL STANDARD  © ISO ISO 3175-2:1998(E)
Textiles — Dry cleaning and finishing —
Part 2:
Procedures for tetrachloroethene
1 Scope
This part of ISO 3175 specifies dry-cleaning procedures for tetrachloroethene (perchloroethylene), using
commercial dry-cleaning machines, for fabrics and garments. It comprises a procedure for normal materials and
procedures for sensitive and very sensitive materials (see definitions 3.4 and 3.5).
NOTES
1 Various solvents can be used for dry cleaning, of which tetrachloroethene is the most common in many countries. For this
reason, the present method prescribes the use of tetrachloroethene.
2 When using commercial dry-cleaning equipment, official regulations and normal safety precautions should be observed.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of
ISO 3175. At the time of publication, the editions indicated were valid. All standards are subject to revision, and
parties to agreements based on this part of ISO 3175 are encouraged to investigate the possibility of applying the
most recent editions of the standards indicated below. Members of the IEC and ISO maintain registers of currently
valid International Standards.
ISO 139:1973, Textiles — Standard atmospheres for conditioning and testing.
ISO 3175-1:1998, Textiles — Dry cleaning and finishing — Part 1: Method for assessing the cleanability of textiles
and garments.
3 Definitions
For the purposes of this part of ISO 3175, the following definitions apply.
3.1
materials
garments, composites or fabrics
3.2
composite test specimen
test specimen consisting of all component parts used in the finished item, and combined in a representative
assembly
3.3
normal materials
materials which are able to withstand the normal dry-cleaning process as specified in this part of ISO 3175 without
modification
1

---------------------- Page: 11 ----------------------

SIST EN ISO 3175-2:2000
© ISO
ISO 3175-2:1998(E)
3.4
sensitive materials
materials which may require restrictions as to mechanical action and/or drying temperatures and/or water additions
EXAMPLES Acrylics, silk, crepe
3.5
very sensitive materials
materials which may require greatly reduced mechanical action and/or greatly reduced drying temperatures and/or
no addition of water
EXAMPLES Polyvinylchloride (PVC), modacrylic, novelty tweeds, angora
NOTE — After giving careful consideration to the comments on progressive change in the introduction, textile items which
perform satisfactorily for purpose in the procedures intended for normal and sensitive materials in table 1 may be labelled with
the and symbols respectively, as described in ISO 3758. There is no care label equivalent to the procedure for very
sensitive materials and information on the required processing can only be given in words.
4 Reagents
4.1  Tetrachloroethene, CCl = CCl distilled, sold for the purpose of dry cleaning.
2 2
4.2  Sorbitan mono-oleate.
NOTE — In order to prevent foaming, it is important to use redistilled, clean solvent solution and not overfill the still.
5 Apparatus
5.1  Dry cleaning machine, consisting of a commercial reversible rotating cage type, totally enclosed machine
intended for use with tetrachloroethene, The diameter of the rotating cage shall 600 mm minimum and 1 080 mm
maximum. Its depth shall be 300 mm minimum. It shall be fitted with three or four lifters. The speed shall be such as
to give a g-factor between 0,5 and 0,8 for cleaning and between 60 and 120 for extraction.
NOTE — The g-factor is calculated according to the following formula:
2 –7
g = 5,6 n d · 10
where
n is the rotational frequency, in rotations per minute;
d is the rotating cage diameter, in millimetres.
5.1.1  The machine shall be fitted with the means to control solvent and air temperature as required (see table 1).
5.1.2  The machine shall have suitable facilities to allow the emulsion (see 8.1.3) to be introduced gradually into the
solvent between the cage and drum below the level of the solvent.
5.1.3  The machine shall be equipped with a means of measuring the temperature of the solvent during washing
and either
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.