SIST EN ISO 20932-1:2020/A1:2022
(Amendment)Textiles - Determination of the elasticity of fabrics - Part 1: Strip tests - Amendment 1 (ISO 20932-1:2018/Amd 1:2021)
Textiles - Determination of the elasticity of fabrics - Part 1: Strip tests - Amendment 1 (ISO 20932-1:2018/Amd 1:2021)
Textilien - Bestimmung der Elastizität von textilen Flächengebilden - Teil 1: Streifenprüfungen - Änderung 1 (ISO 20932-1:2018/Amd 1:2021)
No scope available
Textiles - Détermination de l'élasticité des étoffes - Partie 1: Essais sur bande - Amendement 1 (ISO 20932-1:2018/Amd 1:2021)
Tekstilije - Ugotavljanje elastičnosti tkanin - 1. del: Preskusi traku - Dopolnilo 1 (ISO 20932-1:2018/Amd 1:2021)
General Information
Relations
Overview
SIST EN ISO 20932-1:2020/A1:2022 is an international amendment to the textile standard for determining the elasticity of fabrics specifically through strip tests. Developed collaboratively by ISO Technical Committee ISO/TC 38 and CEN/TC 248, this amendment refines the original ISO 20932-1:2018 standard to enhance precision and uniformity in textile elasticity measurements. It was officially approved in October 2021 and implemented as a European Standard from 2022.
This standard plays a critical role in providing consistent methods for assessing fabric stretch and recovery properties, essential for quality control, product development, and compliance within the textile and apparel industries.
Key Topics
Textile Elasticity Testing: The standard focuses on evaluating fabric elasticity using strip tests, measuring how textile specimens extend and recover under specified force or extension cycles.
Measurement Parameters:
- Elongation (S): Percentage increase in fabric length under maximum force during test cycles.
- Permanent Deformation (C): The residual deformation after a recovery period, expressed both as a distance and percentage.
- Recovered Extension (D): The amount of extension regained after deformation.
- Elastic Recovery (R): The percentage of the original extension recovered, indicating fabric resilience.
Test Procedures:
- Extension and retraction rates aligned proportionally to the specimen’s initial length (e.g., 100% length per minute).
- Precise definition updates to terms such as recovered elongation, permanent deformation, and elastic recovery enhance clarity.
Standardization Compliance: Mandates adherence by CEN member states ensuring uniform application in EU countries and beyond.
Technical Collaboration: This amendment reflects synergy between ISO and European standardization bodies, reinforcing international harmonization of textile physical tests.
Applications
The SIST EN ISO 20932-1:2020/A1:2022 standard is vital for:
Quality Control in Textile Manufacturing: Ensuring fabric elasticity meets product specifications and withstands wear and deformation.
Product Development: Supporting designers and engineers in selecting materials with desired stretch and recovery traits for apparel, sportswear, upholstery, and technical textiles.
Compliance and Certification: Facilitating market access by providing recognized test methods confirming fabric performance characteristics.
Research and Innovation: Assisting laboratories and R&D teams in improving fabric technologies through reliable elasticity measurement.
Performance Assessment: Evaluating fabrics used in applications requiring specific stretch properties such as compression garments, medical textiles, and protective clothing.
Related Standards
ISO 20932 Series: EN ISO 20932-1 is part of a broader series on fabric elasticity, with additional parts covering alternative testing methods and conditions.
ISO/IEC Directives: Defines the editorial and procedural frameworks for preparing and maintaining international standards including amendments.
CEN-CENELEC Standards: Coherence with European standards ensures compatibility and legal enforceability within the European market.
Standards on Textile Conditioning and Physical Tests: Standards that govern test atmospheres and overarching physical textile assessments complement EN ISO 20932-1 requirements.
Keywords: textile elasticity standard, EN ISO 20932-1 amendment, fabric elasticity testing, strip tests for textiles, elastic recovery measurement, fabric stretch and deformation, textile quality control, ISO textile standards, CEN textile standard, fabric elongation test, permanent deformation of fabrics.
Frequently Asked Questions
SIST EN ISO 20932-1:2020/A1:2022 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Textiles - Determination of the elasticity of fabrics - Part 1: Strip tests - Amendment 1 (ISO 20932-1:2018/Amd 1:2021)". This standard covers: No scope available
No scope available
SIST EN ISO 20932-1:2020/A1:2022 is classified under the following ICS (International Classification for Standards) categories: 59.080.01 - Textiles in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 20932-1:2020/A1:2022 has the following relationships with other standards: It is inter standard links to SIST EN ISO 20932-1:2020. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN ISO 20932-1:2020/A1:2022 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2022
Tekstilije - Ugotavljanje elastičnosti tkanin - 1. del: Preskusi traku - Dopolnilo 1
(ISO 20932-1:2018/Amd 1:2021)
Textiles - Determination of the elasticity of fabrics - Part 1: Strip tests - Amendment 1
(ISO 20932-1:2018/Amd 1:2021)
Textilien - Bestimmung der Elastizität von textilen Flächengebilden - Teil 1:
Streifenprüfungen - Änderung 1 (ISO 20932-1:2018/Amd 1:2021)
Textiles - Détermination de l'élasticité des étoffes - Partie 1: Essais sur bande -
Amendement 1 (ISO 20932-1:2018/Amd 1:2021)
Ta slovenski standard je istoveten z: EN ISO 20932-1:2020/A1:2021
ICS:
59.080.01 Tekstilije na splošno Textiles in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 20932-1:2020/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2021
EUROPÄISCHE NORM
ICS 59.080.30
English Version
Textiles - Determination of the elasticity of fabrics - Part 1:
Strip tests - Amendment 1 (ISO 20932-1:2018/Amd
1:2021)
Textiles - Détermination de l'élasticité des étoffes - Textilien - Bestimmung der Elastizität von textilen
Partie 1: Essais sur bande - Amendement 1 (ISO Flächengebilden - Teil 1: Streifenprüfungen - Änderung
20932-1:2018/Amd 1:2021) 1 (ISO 20932-1:2018/Amd 1:2021)
This amendment A1 modifies the European Standard EN ISO 20932-1:2020; it was approved by CEN on 28 October 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20932-1:2020/A1:2021 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 20932-1:2020/A1:2021) has been prepared by Technical Committee ISO/TC 38
"Textiles" in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2022, and conflicting national standards shall be
withdrawn at the latest by May 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 20932-1:2018/Amd 1:2021 has been approved by CEN as EN ISO 20932-
1:2020/A1:2021 without any modification.
INTERNATIONAL ISO
STANDARD 20932-1
First edition
2018-11
AMENDMENT 1
2021-10
Textiles — Determination of the
elasticity of fabrics —
Part 1:
Strip tests
AMENDMENT 1
Textiles — Détermination de l'élasticité des étoffes —
Partie 1: Essais sur bande
AMENDEMENT 1
Reference number
ISO 20932-1:2018/Amd.1:2021(E)
ISO 20932-1:2018/Amd.1:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Pho
...








Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...