SIST EN 300 443-6 V1.2.1:2003

• Abstract:

  Upgrade of Test Specification.

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI EN 300 443-6 V1.2.1 (2000-10) - Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network

SIST EN 300 443-6 V1.2.1:2003 is the SIST adoption of ETSI EN 300 443-6 for B-ISDN DSS2 network-side conformance testing. It specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the B-ISDN user-network interface layer 3 specification for basic call/bearer control. In practice, it is used to test network implementations against EN 300 443-1 at the relevant user-network reference point.

What does SIST EN 300 443-6 V1.2.1:2003 specify?

SIST EN 300 443-6 V1.2.1:2003 specifies the network ATS for implementations conforming to the DSS2 layer 3 basic call/bearer control protocol on the TB reference point, or the coincident SB and TB reference point, of the pan-European B-ISDN user-network interface. The standard is part 6 of a multi-part series, so it focuses on conformance testing rather than the protocol itself.

The document is organized into clauses on scope, references, definitions and abbreviations, abstract test method, untestable test purposes, ATS-to-TP mapping, and conformance rules for PCTR, PIXIT and the ATS. It then adds three normative annexes that provide the reporting and test-suite material used in practice.

Annex	What it covers
Annex A	Protocol Conformance Test Report (PCTR) proforma
Annex B	Partial PIXIT proforma
Annex C	Abstract Test Suite (ATS)

What are the key requirements of SIST EN 300 443-6 V1.2.1:2003?

Clause 4 - how the tests are structured

SIST EN 300 443-6 V1.2.1:2003 uses a combined remote and multi-party abstract test method. The Main Test Component (MTC) controls one or more Parallel Test Components (PTCs), and the test system observes the implementation at the lower point of control and observation, L0.

This matters because verdicts are based on behavior seen at the interface under test. Events seen only at the other points, such as L1, support the stimulus but do not directly decide pass or fail.

Clause 4 - how verdicts are assigned

SIST EN 300 443-6 V1.2.1:2003 states that the master tester at L0 assigns the verdict, while the slave-side behavior is used to make the implementation generate the required messages. If a message expected at L0 is not received after stimulus at L1, the result can be INCONCLUSIVE rather than FAIL.

For users of the ATS, this means they must interpret results in the context of the test method, not just the final message trace.

Clause 5 and 6 - test purpose coverage

SIST EN 300 443-6 V1.2.1:2003 states that there are no untestable test purposes, and that the identifiers used for the test purposes in EN 300 443-5 are reused as test case names with a one-to-one mapping.

That makes it straightforward to trace each test case back to the corresponding test purpose when planning or reviewing a conformance campaign.

Clauses 7 to 9 - conformance of reports, PIXIT and ATS

SIST EN 300 443-6 V1.2.1:2003 requires a PCTR produced for this ATS to conform to the annex A proforma, with the same clause order preserved. It also requires PIXIT material prepared for executing the ATS to be technically equivalent to annex B, while allowing extra questions needed to set up a particular Means of Testing (MOT).

For ATS conformance, the standard requires an executable test suite to be technically equivalent to annex C, and all abstract test event sequences must be realizable in the executable test case. Any extra checks performed by the test system are outside the scope of verdict assignment.

What terms does SIST EN 300 443-6 V1.2.1:2003 define?

• Implementation Under Test (IUT) - the protocol implementation being assessed at the network interface.
• System Under Test (SUT) - the complete system being tested in the conformance campaign.
• Abstract Test Suite (ATS) - the abstract test definitions used to assess conformance.
• Protocol Implementation Conformance Statement (PICS) - the statement describing what a protocol implementation supports.
• Protocol Implementation eXtra Information for Testing (PIXIT) - the extra implementation information needed to run the tests.
• Point of Control and Observation (PCO) - the point where the test system controls and observes behavior.
• Main Test Component (MTC) - the component that controls the overall test execution and verdict at L0.

Who uses SIST EN 300 443-6 V1.2.1:2003?

SIST EN 300 443-6 V1.2.1:2003 is used by conformance test laboratories, test tool developers, and telecom equipment suppliers working on B-ISDN DSS2 network-side implementations. It is also relevant to quality teams and buyers who need evidence that a network implementation has been tested against the B-ISDN basic call/bearer control specification.

The standard is mainly used when preparing test campaigns, setting up the Means of Testing, completing PIXIT information, and recording results in a PCTR.

Which standards are used with SIST EN 300 443-6 V1.2.1:2003?

• EN 300 443-1 - gives the protocol specification being tested.
• EN 300 443-2 - gives the PICS proforma used to describe implementation support.
• EN 300 443-5 - gives the Test Suite Structure and Test Purposes for the network and the test-purpose identifiers reused here.
• ISO/IEC 9646-1 - provides the general conformance testing concepts and definitions.
• ISO/IEC 9646-2 - provides the abstract test suite specification framework.
• ISO/IEC 9646-3 - provides Tree and Tabular Combined Notation (TTCN).
• ISO/IEC 9646-4 - covers test realization and executable test suites.
• ISO/IEC 9646-5 - covers requirements on test laboratories and clients.
• ITU-T Recommendation I.413 - defines the B-ISDN user-network interface reference points used in the scope.

What does the SIST EN 300 443-6 V1.2.1:2003 document contain?

Annex A provides a PCTR form with fields for identification summary, IUT identification, testing environment, limits and reservations, static and dynamic conformance summaries, and the test campaign report. Annex B provides the partial PIXIT form, including test laboratory details, SUT details, configuration to be tested, stimuli for the IUT, test management timers, and parameter values.

Annex C contains the ATS itself in TTCN.GR and TTCN.MP form, with the machine-processable and graphical representations supplied in the accompanying archive. This is the material test realizers use to build executable tests, and test laboratories use to run conformance assessments.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SUHVNXãDQMHBroadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 300 443-6 Version 1.2.1SIST EN 300 443-6 V1.2.1:2003en01-december-2003SIST EN 300 443-6 V1.2.1:2003SLOVENSKI
STANDARD
ETSIEN300443-6V1.2.1(2000-10)EuropeanStandard(Telecommunicationsseries)BroadbandIntegratedServicesDigitalNetwork(B-ISDN);DigitalSubscriberSignallingSystemNo.two(DSS2)protocol;B-ISDNuser-networkinterfacelayer3specificationforbasiccall/bearercontrol;Part6:AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationforthenetworkSIST EN 300 443-6 V1.2.1:2003

ETSIETSIEN300443-6V1.2.1(2000-10)2ReferenceREN/SPAN-05143-6KeywordsATS,BC,broadband,B-ISDN,DSS2,ISDN,layer3,network,PIXIT,UNIETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]opartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 300 443-6 V1.2.1:2003

ETSIETSIEN300443-6V1.2.1(2000-10)3ContentsIntellectualPropertyRights.5Foreword.51Scope.62References.63Definitionsandabbreviations.73.1Definitions.73.2Abbreviations.74AbstractTestMethod.84.1DescriptionofATMused.84.2ConventionsfortestcomponentsandPCOs.85Untestabletestpurposes.96ATStoTPmap.97PCTRconformance.108PIXITconformance.109ATSconformance.10AnnexA(normative):ProtocolConformanceTestReport(PCTR)proforma.11A.1Identificationsummary.11A.1.1Protocolconformancetestreport.11A.1.2IUTidentification.11A.1.3Testingenvironment.11A.1.4Limitsandreservations.12A.1.5Comments.12A.2IUTConformancestatus.12A.3Staticconformancesummary.12A.4Dynamicconformancesummary.13A.5Staticconformancereviewreport.13A.6Testcampaignreport.13A.7Observations.22AnnexB(normative):PartialPIXITproforma.23B.1Identificationsummary.23B.2Abstracttestsuitesummary.23B.3Testlaboratory.23B.4Client(ofthetestlaboratory).24B.5SUT.24B.6Protocolinformation.25B.6.1Protocolidentification.25B.6.2Configurationtobetested.25B.6.3StimulifortheIUT.26B.6.4Testmanagementtimers.26B.6.5ParameterValues.26SIST EN 300 443-6 V1.2.1:2003

ETSIETSIEN300443-6V1.2.1(2000-10)4AnnexC(normative):AbstractTestSuite(ATS).29C.1TheTTCNGraphicalform(TTCN.GR).29C.2TheTTCNMachineProcessableform(TTCN.MP).29History.30SIST EN 300 443-6 V1.2.1:2003

ETSIETSIEN300443-6V1.2.1(2000-10)5IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeServicesandProtocolsforAdvancedNetworks(SPAN).Thepresentdocumentispart6ofamulti-partstandardcoveringtheDigitalSubscriberSignallingSystemNo.2(DSS2)protocolspecificationfortheB-ISDNuser-networkinterfacelayer3specificationforbasiccall/bearercontrol,asidentifiedbelow:Part1:"Protocolspecification";Part2:"ProtocolImplementationConformanceStatement(PICS)proformaspecification";Part3:"TestSuiteStructureandTestPurposes(TSS&TP)specificationfortheuser";Part4:"AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationfortheuser";Part5:"TestSuiteStructureandTestPurposes(TSS&TP)specificationforthenetwork";Part6:"AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationforthenetwork".NationaltranspositiondatesDateofadoptionofthisEN:6October2000DateoflatestannouncementofthisEN(doa):31January2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31July2001DateofwithdrawalofanyconflictingNationalStandard(dow):31July2001SIST EN 300 443-6 V1.2.1:2003

ETSIETSIEN300443-6V1.2.1(2000-10)61ScopeThissixthpartofEN300443specifiesthenetworkAbstractTestSuite(ATS)fortheTBreferencepointorcoincidentSBandTBreferencepoint(asdefinedinITU-TRecommendationI.413[9])ofimplementationsconformingtothestandardsforthesignallinguser-networklayer3specificationforbasiccall/bearercontroloftheDigitalSubscriberSignallingSystemNo.two(DSS2)protocolforthepan-EuropeanBroadbandIntegratedServicesDigitalNetwork(B-ISDN),EN300443-1[1].EN300443-5[3]specifiestheTestSuiteStructureandTestPurposes(TSS&TP)relatedtothisATSandpartialPIXITproforma.OtherpartsspecifytheTSS&TPandtheATSandpartialPIXITproformafortheUsersideoftheTBreferencepointorcoincidentSBandTBreferencepointofimplementationsconformingtoEN300443-1[1].2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.• Anon-specificreferencetoanETSshallalsobetakentorefertolaterversionspublishedasanENwiththesamenumber.[1]ETSIEN300443-1(V1.3):"BroadbandIntegratedServicesDigitalNetwork(B-ISDN);DigitalSubscriberSignallingSystemNo.two(DSS2)protocol;B-ISDNuser-networkinterfacelayer3specificationforbasiccall/bearercontrol;Part1:Protocolspecification[ITU-TRecommendationQ.2931(1995),modified]".[2]ETSIEN300443-2(V1.2):"BroadbandIntegratedServicesDigitalNetwork(B-ISDN);DigitalSubscriberSignallingSystemNo.two(DSS2)protocol;B-ISDNuser-networkinterfacelayer3specificationforbasiccall/bearercontrol;Part2:ProtocolImplementationConformanceStatement(PICS)proformaspecification".[3]ETSIEN300443-5(V1.2):"BroadbandIntegratedServicesDigitalNetwork(B-ISDN);DigitalSubscriberSignallingSystemNo.two(DSS2)protocol;B-ISDNuser-networkinterfacelayer3specificationforbasiccall/bearercontrol;Part5:TestSuiteStructureandTestPurposes(TSS&TP)specificationforthenetwork".[4]ISO/IEC9646-1:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part1:Generalconcepts".[5]ISO/IEC9646-2:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part2:AbstractTestSuitespecification".[6]ISO/IEC9646-3:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part3:TheTreeandTabularCombinedNotation(TTCN)".[7]ISO/IEC9646-4:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part4:Testrealization".[8]ISO/IEC9646-5:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part5:Requirementsontestlaboratoriesandclientsfortheconformanceassessmentprocess".[9]ITU-TRecommendationI.413(1993):"B-ISDNuser-networkinterface".SIST EN 300 443-6 V1.2.1:2003

ETSIETSIEN300443-6V1.2.1(2000-10)73Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thefollowingtermsanddefinitionsapply:ImplementationUnderTest(IUT):seeISO/IEC9646-1[4]SystemUnderTest(SUT):seeISO/IEC9646-1[4]AbstractTestSuite(ATS):seeISO/IEC9646-1[4]ProtocolImplementationConformanceStatement(PICS):seeISO/IEC9646-1[4]PICSproforma:seeISO/IEC9646-1[4]ProtocolImplementationeXtraInformationforTesting(PIXIT):seeISO/IEC9646-1[4]PIXITproforma:seeISO/IEC9646-1[4]LowerTester(LT):seeISO/IEC9646-1[4]UpperTester(UT):seeISO/IEC9646-1[4]PointofControlandObservation(PCO):seeISO/IEC9646-1[4]3.2AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:ATMAbstractTestMethodATSAbstractTestSuiteB-ISDNBroadbandIntegratedServicesDigitalNetworkCMCo-ordinationMessageCPCo-ordinationPointDSS2DigitalSubscriberSignallingSystemNo.twoExTSExecutableTestSuiteISDNIntegratedServicesDigitalNetworkIUTImplementationUnderTestLTLowerTesterMOTMeansOfTestingMTCMainTestComponentPCOPointofControlandObservationPCTRProtocolConformanceTestReportPDUProtocolDataUnitPICSProtocolImplementationConformanceStatementPIXITProtocolImplementationeXtraInformationforTestingPTCParallelTestComponentSUTSystemUnderTestTPTestPurposeTTCNTreeandTabularCombinedNotationUTUpperTesterSIST EN 300 443-6 V1.2.1:2003

ETSIETSIEN300443-6V1.2.1(2000-10)84AbstractTestMethod4.1DescriptionofATMusedTherequirementfortestingthenetworkIUTistofocusonthebehaviourofthenetworkIUTattheuser-networkinterfacewhereaTBreferencepointorcoincidentSBandTBreferencepointapplies.ThustheIUTisthenetworkDSS2protocolentityataparticularuser-networkinterfaceandisnotthewholenetwork.ItispossibletospecifyanATSbasedonasingleparty(remote)testmethodforsuchanIUT.However,itisconsideredthatanATSbasedonsuchanapproachisoflimiteduseastheonlywaytospecifyIUTgeneratedPDUsistousethe"implicitsend"statement.ManyusersofsuchanATSwouldreplacethe"implicitsend"statementswithdescriptionsofthebehaviouratotherinterfaces.AnATSbasedonamulti-partytestmethodisconsideredtobemoreusefulinthatitisclosertohowarealtestsuitewouldbeconstructed.Suchatestmethodspecifiesbehaviouratmultiplenetworkinterfaces.Oneveryimportantlimitationhereisthattestsarefocussedononeparticularinterface.ThusthetestsystemismadeuponeMainTestComponent(MTC)andoneormoreParallelTestComponents(PTC),seefigure1.4.2ConventionsfortestcomponentsandPCOsMasterpartSlavepartMTCAPTC1A1(CP)L0(PCO)L1(PCO)IUTNETWORKFigure1:Multi-partytestmethodInamaster/slavearrangement,theMTCisconsideredtobethemasterwhilethePTCsaretheslaves.The"slave"testersareonlyanexplicitdescriptionofhowtodealwiththeremoteinterfacesduringthetestingprocess,i.e."howtomaketheIUTsendtherequiredmessage".SIST EN 300 443-6 V1.2.1:2003

ETSIETSIEN300443-6V1.2.1(2000-10)9Thismeans,inparticular,thattheverdictwillonlybeassignedfromtheprotocolaspectsobservedontheinterfaceundertest(i.e.bythe"master"tester),asitwouldbeobservedbyaterminalconnectedtothisinterface.Afailureinthecorrelationbetweentheprotocolatthedifferentinterfacestowhichthedifferenttestersareconnected,i.e.inthemechanismofthefunctionalserviceitself,willnotcauseaFAILverdict.Forinstance,iftheIUTfailstosendamessageonthetestedinterfaceafteranotherinterfacehasreceivedtheproperstimulus,theverdictwillbeINCONCLUSIVE.TheMTCMTCAhastwofunctionsinthisconfiguration.Firstly,ithastheMTCfunctionofcontrollingtheoneormorePTCs.ThusitisresponsibleforstartingthePTCsandafterwardsco-ordinatesactivitiesbyexchangingCo-ordinationMessages(CM)withthePTCs.SecondlyitisresponsibleforthebehaviouroftheLowerTester(LT)atPCOL0.Acombinationoftheremoteandmulti-partytestmethodsisapplied.Ascanbeseenfromfigure1,severalPCOsareused.AllPCOsresideattheserviceaccesspointsbetweenlayers2and3.MTCSUTPTC1Layer3Layer2Layer1L0IUTL1Layer3Layer2Layer1ServiceproviderFigure2:Combinationoftheremoteandmulti-partytestmethodsTheMTCPCOisnamed"L0"("L"forLower).TheL0PCOisusedtocontrolandobservethebehaviouroftheIUTandtestcaseverdictsareassigneddependingonthebehaviourobservedatthisPCO.ThePTCPTC1usesPCOsL1.ThesePCOisusedtocontroland,inalimitedway,observethebehaviourofthenetworkequipmentatinterfaceotherthantheoneundertest.NoverdictsareassignedatthisPCO.Asstatedinapreviousparagraph,thenon-receiptofnetworkgeneratedmessagesatL0,whicharestimulatedbyeventsattheL1,willresultinINCONCLUSIVEratherthanFAILverdictsbeingassigned.IntestcaseswhichverifythattheIUTrejectsinvalidorunacceptableSETUPmessagesandinthemajorityofthetestcasesfortherestartprocedures,noPTCisactivatedatall,astheseproceduresareconsideredlocaltotheaccessbetweenIUTandMTC.5UntestabletestpurposesTherearenountestabletestpurposesassociatedwiththisATS.6ATStoTPmapTheidentifiersusedfortheTPs(seeEN300443-5[3])arereusedastestcasenames.Thusthereisastraightforwardone-to-onemapping.SIST EN 300 443-6 V1.2.1:2003

ETSIETSIEN300443-6V1.2.1(2000-10)107PCTRconformanceAtestlaboratory,whenrequestedbyaclienttoproduceaPCTR,isrequired,asspecifiedinISO/IEC9646-5[8],toproduceaPCTRconformantwiththePCTRtemplategiveninannexBofISO/IEC9646-5[8].Furthermore,atestlaboratory,offeringtestingfortheATSspecificationcontainedinannexC,whenrequestedbyaclienttoproduceaPCTR,isrequiredtoproduceaPCTRconformantwiththePCTRproformacontainedinannexAofthepresentdocument.APCTRwhichconformstothisPCTRproformaspecificationshallpreservethecontentandorderingoftheclausescontainedinannexA.ClauseA.6ofthePCTRmaycontainadditionalcolumns.Ifincluded,theseshallbeplacedtotherightoftheexistingcolumns.Textinitalicsmayberetainedbythetestlaboratory.8PIXITconformanceAtestrealizer,producinganexecutabletestsuitefortheAbstractTestSuite(ATS)specificationcontainedinannexC,isrequired,asspecifiedinISO/IEC9646-4[7],toproduceanaugmentedpartialPIXITproformaconformantwiththispartialPIXITproformaspecification.AnaugmentedpartialPIXITproformawhichconformstothispartialPIXITproformaspecificationshall,asaminimum,havecontentswhicharetechnicallyequivalenttoannexB.TheaugmentedpartialPIXITproformamaycontainadditionalquestionsthatneedtobeansweredinordertopreparetheMeansOfTesting(MOT)foraparticularImplementationUnderTest(IUT).Atestlaboratory,offeringtestingfortheATSspecificationcontainedinannexC,isrequired,asspecifiedinISO/IEC9646-5[8],tofurtheraugmenttheaugmentedpartialPIXITproformatoproduceaPIXITproformaconformantwiththispartialPIXITproformaspecification.APIXITproformawhichconformstothispartialPIXITproformaspecificationshall,asaminimum,havecontentswhicharetechnicallyequivalenttoannexB.ThePIXITproformamaycontainadditionalquestionsthatneedtobeansweredinordertopreparethetestlaboratoryforaparticularIUT.9ATSconformanceThetestrealizerproducingaMeansOfTesting(MOT)andExecutableTestSuite(ExTS)forthisAbstractTestSuite(ATS)specificationshallcomplywiththerequirementsofISO/IEC9646-4[7].Inparticular,theseconcerntherealizationofanExTSbasedoneachATS.ThetestrealizershallprovideastatementofconformanceoftheMOTtothisATSspecification.AnExTSwhichconformstothisATSspecificationshallcontaintestgroupsandtestcaseswhicharetechnicallyequivalenttothosecontainedintheATSinannexC.Allsequencesoftesteventscomprisinganabstracttestcaseshallbecapableofbeingrealizedintheexecutabletestcase.AnyfurthercheckingwhichthetestsystemmightbecapableofperformingisoutsidethescopeofthisATSspecificationandshallnotcontributetotheverdictassignmentforeachtestcase.TestlaboratoriesrunningconformancetestservicesusingthisATSshallcomplywithISO/IEC9646-5[8].AtestlaboratorywhichclaimstoconformtothisATSspecificationshalluseanMOTwhichconformstothisATS.SIST EN 300 443-6 V1.2.1:2003

ETSIETSIEN300443-6V1.2.1(2000-10)11AnnexA(normative):ProtocolConformanceTestReport(PCTR)proformaNotwithstandingtheprovisionsofthecopyrightclauserelatedtothetextofthepresentdocument,ETSIgrantsthatusersofthepresentdocumentmayfreelyreproducethePCTRproformainthisannexsothatitcanbeusedforitsintendedpurposesandmayfurtherpublishthecompletedPCTR.A.1IdentificationsummaryA.1.1ProtocolconformancetestreportPCTRnumber:PCTRDate:CorrespondingSCTRnumber:CorrespondingSCTRdate:TestLa
...