V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs); Part 1: Interface specification

This part of a set of ETSs on VB5 reference points specifies the physical, procedural and protocol requirements for the interfaces at the VB5.1 reference point between a broadband or combined narrowband & broadband access network and a service node. The access network shall support flexible (provisioned) VPC and VCC allocation but without concentration capability at VC level within the access network.

Vmesniki V digitalnega storitvenega vozlišča (SN) - Vmesniki na referenčni točki VB5.1 za podporo širokopasovnih ali kombiniranih ozkopasovnih in širokopasovnih dostopovnih omrežij (AN) - 1. del: Specifikacija vmesnika

General Information

Status
Published
Publication Date
30-Nov-2000
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2000
Due Date
01-Dec-2000
Completion Date
01-Dec-2000

Buy Standard

Standard
EN 301 005-1:2000
English language
170 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PHVQLNDV interfaces at the digital Service Node (SN); Interfaces at the VB5.1 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs); Part 1: Interface specification35.200Vmesniška in povezovalna opremaInterface and interconnection equipmentICS:Ta slovenski standard je istoveten z:EN 301 005-1 Version 1.1.4SIST EN 301 005-1:2000en01-december-2000SIST EN 301 005-1:2000SLOVENSKI
STANDARD



SIST EN 301 005-1:2000



EN 301 005-1 V1.1.4 (1998-05)European Standard (Telecommunications series)V interfaces at the digital Service Node (SN);Interfaces at the VB5.1 reference point for the support ofbroadband or combined narrowband and broadbandAccess Networks (ANs);Part 1: Interface specificationSIST EN 301 005-1:2000



ETSIEN 301 005-1 V1.1.4 (1998-05)2ReferenceDEN/SPS-03046-1 (9b090ieo.PDF)KeywordsV interface, PSTN, ISDN, B-ISDNETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frhttp://www.etsi.frhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 005-1:2000



ETSIEN 301 005-1 V1.1.4 (1998-05)3ContentsIntellectual Property Rights.9Foreword.9Introduction.91Scope.112References.122.1Normative references.122.2Informative references.143Definitions and abbreviations.143.1Definitions.143.2Abbreviations.154Field of application.174.1Applications of the VB5.1 interface.174.1.1Transport network.184.2Integration of narrowband customer access types.194.3Support of other non-B-ISDN access types.204.4Support of various service node types.205Introduction to the VB5.1 reference point concept.235.1General VB5.1 design principles.235.2General reference model for the VB5.1 reference point.245.3General characteristics of individual functional groups.265.3.1User port function characteristics.265.3.2ATM connection function characteristics.265.3.3Service port function characteristics.265.4Functional modelling.275.4.1Modelling of user port function.275.4.2Modelling of service port function.275.4.3Modelling of ATM connection function.285.5AN view and SN view of physical and logical ports.295.5.1View from access network.295.5.2View from service node.306Procedural interface requirements.316.1Introduction.316.2Physical layer requirements.326.2.1General.326.2.2Basic characteristics of the VB5.1 interface.326.2.3VB5.1 interface options.336.2.4Interface requirements.336.2.4.1Interface topology and transfer capability.336.2.4.2Maximum number of transmission convergence functions.336.2.4.3Timing.346.2.4.4OAM.346.2.4.5Protection.346.2.4.6Transmission path identification.346.2.4.7Pre-assigned cell headers for use by the physical layer.346.3ATM layer requirements.346.3.1Cell header format and encoding and pre-assigned cell headers for use by the ATM layer.346.3.2Cell Loss Priority (CLP).356.3.3VPC carrying the RTMC protocol VCC.356.3.4OAM.356.4Higher layer interface requirements.356.4.1User plane.356.4.2Control plane.35SIST EN 301 005-1:2000



ETSIEN 301 005-1 V1.1.4 (1998-05)46.4.3Management plane.356.4.4Establishment of VP and VC links/connections.366.4.4.1Establishment of VP links and connections.366.4.4.2Establishment of VC links and VC connections.366.4.5ATM adaptation layer for the RTMC protocol.366.4.5.1General AAL requirements.366.4.5.2AAL5 requirements.366.4.5.3SSCOP requirements.366.4.5.4SSCF requirements.376.5Meta-signalling.376.6Interface management application.377Broadband access network connection types.377.1Introduction to connections/connection elements.377.2Multipoint requirements.387.3Broadband access network connection element identifiers.387.3.1Connection element identifiers in user-to-network signalling messages.387.3.2Connection element identifiers in RTMC messages.387.4Broadband access network connection type matrix.397.5B-ISDN type broadband access network connections.417.5.1Type A broadband access network connections.417.5.1.1Type A-VP broadband access network connection.417.5.1.1.1Application of type A-VP ptp broadband AN connection.417.5.1.2Type A-VC broadband access network connections.427.5.1.2.1Application of type A-VC ptp broadband AN connection.437.5.2Type B broadband access network connections.447.6Non-B-ISDN type broadband access network connections (type D).447.6.1Type D-VP broadband access network connection.447.6.2 Type D-VC broadband access network connection.457.6.3Application example of non-B-ISDN type broadband access network connections for the support ofnarrowband access types.458Non-B-ISDN access.468.1General considerations.468.2ATM based accesses.468.2.1General approach.468.2.2User plane.478.2.3Control plane.478.2.4Management plane.478.3Non-ATM based accesses.488.3.1General approach.488.3.1.1User plane.488.3.1.2Control plane.498.3.1.3Management plane.498.3.2Analogue and 64 kbit/s based narrowband accesses as supported by V5 interfaces.508.3.2.1Principles.508.3.2.2AAL for 2 048 kbit/s circuit emulation.508.3.2.3Connection characteristics for circuit emulation.518.3.3Other non-ATM based non-B-ISDN accesses.519Transfer and layer management functions.529.1General functional architecture.529.2Functional architecture of transfer and layer management functions.539.3Transfer functions required for individual broadband AN connection types.549.4Functions associated with the physical user port.559.5Functions associated with the logical user port.569.5.1ATM virtual path sublayer functions at the LUP.569.5.2ATM virtual channel sublayer functions on top of the LUP.569.6Functions associated with the adaptation of non-B-ISDN access types.589.6.1Functions for the support of narrowband accesses as supported by V5 interfaces.589.6.2Functions for the support of other non-B-ISDN access types.58SIST EN 301 005-1:2000



ETSIEN 301 005-1 V1.1.4 (1998-05)59.7Connection functions.589.8Functions associated with the physical service port.589.9Functions associated with the Logical Service Port (LSP).599.9.1ATM virtual path sublayer functions at the LSP.599.9.2ATM virtual channel sublayer functions on top of the LSP.5910Provisioning principles and requirements.6210.1General.6210.2Principles.6211Principles and requirements for Real Time Management Co-ordination (RTMC).6311.1Principles and requirements for real-time management co-ordination (RTMC).6311.1.1General principles for RTMC.6311.1.2RTMC requirements related to administrative actions.6411.1.2.1General.6411.1.2.2Manipulation of generic administrative state attributes.6511.1.2.3Manipulation of VB5.1 specific state attributes.6611.1.3RTMC requirements related to the occurrence of fault conditions.6611.1.4Verification of LSP ID.6711.1.5Interface reset procedure.6711.1.6VPCI consistency check.6711.1.7Activation/deactivation of B-ISDN accesses under control of the SN.6811.1.8Procedural RTMC requirements.6811.1.9Summary of RTMC functions.6812Performance design objectives.7012.1Performance design objectives for transfer functions.7012.2Performance design objectives for RTMC functions.7013VB5.1 system architecture, structure and procedures.7013.1Introduction.7013.2VB5.1 system architecture.7113.2.1System diagrams.7113.2.1.1SN and AN overview.7113.2.1.2Naming conventions.7113.2.1.3AN VB5.1 system.7213.2.1.4SN VB5.1 system.7513.2.1.5Signallists.7813.2.2Block diagrams.8713.2.2.1System management.8713.2.2.1.1AN system management.8713.2.2.1.2SN system management.8813.2.2.1.3System management internal signallists.8913.2.2.2Resource Management.9113.2.2.2.1AN Resource Management.9113.2.2.2.2SN Resource Management.9313.2.2.3RTMC protocol entity.9513.2.2.3.1AN RTMC protocol entity.9513.2.2.3.2SN RTMC protocol entity.9713.3RTMC procedures.9913.3.1General principles for the RTMC procedures.9913.3.1.1VB5.1 system external events.9913.3.1.2Single VP messages and multi VP messages.9913.3.1.3Acknowledgements.9913.3.1.4Use of transaction identifiers.9913.3.1.5General error handling.10013.3.1.5.1Handling of protocol error conditions.10013.3.1.5.2Error procedures with explicit action indication.10213.3.1.5.3Error in communication with peer network element.10213.3.1.5.4Resources unknown in peer network element.10213.3.1.5.5Requested operation rejected by peer network element.10213.3.2Co-ordination of resource status change procedures.102SIST EN 301 005-1:2000



ETSIEN 301 005-1 V1.1.4 (1998-05)613.3.2.1Block and unblock procedures.10313.3.2.1.1General.10313.3.2.1.2Procedure.10313.3.2.1.3Exceptional procedures.11113.3.2.2Shutting down of resources.11113.3.2.2.1General.11113.3.2.2.2Procedure.11113.3.2.2.3Exceptional procedures.11313.3.3VPCI consistency check procedure.11413.3.3.1General.11413.3.3.2Procedure.11413.3.3.2.1Initiating VPCI consistency check.11413.3.3.2.2Terminating VPCI consistency check.11413.3.3.3Exceptional procedures.11513.3.3.3.1Initiating VPCI consistency check.11513.3.3.3.2Terminating VPCI consistency check.11613.3.4RTMC housekeeping procedures.11613.3.4.1Start-up procedure.11613.3.4.1.1General.11613.3.4.1.2Procedure.11613.3.4.1.3Exceptional procedures.11813.3.4.2Verify logical service port Id procedure.11813.3.4.2.1General.11813.3.4.2.2Procedu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.