SIST EN 10210-2:2006/AC:2007

Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties

TC - Modification to Table B.3

Warmgefertigte Hohlprofile für den Stahlbau aus unlegierten Baustählen und aus Feinkornbaustählen - Teil 2: Grenzabmaße, Maße und statische Werte

Profils creux de construction finis a chaud en aciers non alliés et a grains fins - Partie 2 : Tolérances, dimensions et caractéristiques de profil

Vroče izdelani votli konstrukcijski profili iz nelegiranih in drobnozrnatih jekel - 2. del: Mere, mejni odstopki in značilnosti profilov

General Information

• Status: Withdrawn
• Publication Date: 10-Apr-2007
• Withdrawal Date: 20-May-2019
• ICS: 77.140.45 - Non-alloyed steels
• ICS: 77.140.70 - Steel profiles
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 20-May-2019
• Due Date: 12-Jun-2019
• Completion Date: 21-May-2019
• Directive: 89/106/EEC - Construction products
• Mandate: M/120 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural metallic products and ancillaries
• Mandate: M/BC/CEN/89/10 - ECISS - 3rd programme
• Ref Project: EN 10210-2:2006/AC:2007 - Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties

Relations

• Corrects: SIST EN 10210-2:2006 - Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
• Effective Date: 01-May-2007
• Replaced By: SIST EN 10210-2:2019 - Hot finished steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
• Effective Date: 15-May-2019
• Corrects: SIST EN 10210-2:2006 - Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Warmgefertigte Hohlprofile für den Stahlbau aus unlegierten Baustählen und aus Feinkornbaustählen - Teil 2: Grenzabmaße, Maße und statische WerteProfils creux de construction finis a chaud en aciers non alliés et a grains fins - Partie 2 : Tolérances, dimensions et caractéristiques de profilHot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties77.140.70Jekleni profiliSteel profiles77.140.45Nelegirana jeklaNon-alloyed steelsICS:Ta slovenski standard je istoveten z:EN 10210-2:2006/AC:2007SIST EN 10210-2:2006/AC:2007en01-maj-2007SIST EN 10210-2:2006/AC:2007SLOVENSKI
STANDARD



SIST EN 10210-2:2006/AC:2007



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10210-2:2006/ACFebruary 2007Février 2007Februar 2007ICS 77.140.75English versionVersion FrançaiseDeutsche FassungHot finished structural hollow sections of non-alloy and fine grain steels -Part 2: Tolerances, dimensions and sectional propertiesProfils creux de construction finis à chauden aciers non alliés et à grains fins - Partie2 : Tolérances, dimensions etcaractéristiques de profilWarmgefertigte Hohlprofile für denStahlbau aus unlegierten Baustählen undaus Feinkornbaustählen - Teil 2:Grenzabmaße, Maße und statische WerteThis corrigendum becomes effective on 28 February 2007 for incorporation in the official English andFrench versions of the EN.Ce corrigendum prendra effet le 28 février 2007 pour incorporation dans les versions officie
...