kSIST FprEN ISO 10993-17:2023
(Main)Biological evaluation of medical devices - Part 17: Toxicological risk assessment of medical device constituents (ISO/FDIS 10993-17:2023)
Biological evaluation of medical devices - Part 17: Toxicological risk assessment of medical device constituents (ISO/FDIS 10993-17:2023)
This document specifies the process and requirements for the toxicological risk assessment of medical device constituents. The methods and criteria used to assess whether exposure to a constituent is without appreciable harm are also specified. The toxicological risk assessment can be part of the biological evaluation of the final product, as described in ISO 10993-1.
The process described in this document applies to chemical characterization information obtained in line with ISO 10993-18. When a toxicological risk assessment of either the compositional information or analytical chemistry data (e.g. extractable data or leachable data) are required to determine whether the toxicological risks related to the constituents are negligible or tolerable.
The process described in this document is not intended to apply to circumstances where the toxicological risk has been estimated by other means, such as:
— constituents, excluding cohort of concern or excluded chemicals, that are present in or extracted from a medical device at an amount representative of patient exposure below a relevant, toxicologically-based reporting threshold (see applicable requirements in ISO 10993-18:2020, Annex E and ISO/TS 21726);
— a new or changed medical device for which chemical or biological equivalence has been established with an existing biocompatible or clinically established medical device (see applicable requirements in ISO 10993-18:2020, Annex C).
The process described in this document is also not applicable to:
— medical device constituents that do not contact the body (e.g. in vitro diagnostics);
— biological risks associated with physical interactions of the medical device with the body (i.e. application of mechanical forces, energy or surface morphology, etc.), provided that the chemical exposure is not changed;
— active pharmaceutical ingredients of device-drug combination products or biologic components of device-biologic combination products as additional regulatory considerations can apply;
— exposure to a particular constituent that arises from sources other than the device, such as food, water or air.
Biologische Beurteilung von Medizinprodukten - Teil 17: Toxikologische Risikobewertung von Medizinproduktbestandteilen (ISO/FDIS 10993-17:2023)
In diesem Teil der ISO 10993 sind das Verfahren für und die Anforderungen an die Bewertung des toxikologischen Risikos von Bestandteilen von Medizinprodukten festgelegt, die im Rahmen der in ISO 10993-1 beschriebenen biologischen Beurteilung des Endprodukts anzuwenden sind, einschließlich der Verfahren und Kriterien zur Beurteilung, ob die Exposition gegenüber einem oder mehreren chemischen Bestandteilen ohne nennenswerten Schaden bleibt.
Das in diesem Dokument beschriebene Verfahren ist anzuwenden, nachdem die chemische Charakterisierung des Zusammensetzungsprofils nach ISO 10993-18 durchgeführt wurde und eine toxikologische Risikobewertung entweder der Informationen über die Zusammensetzung oder der Daten zu den extrahierbaren oder herauslösbaren Substanzen erforderlich ist, um festzustellen, ob die mit den Bestandteilen verbundenen Risiken annehmbar sind oder nicht.
Das in diesem Dokument beschriebene Verfahren ist nicht für Fälle vorgesehen, in denen das toxikologische Risiko auf andere Weise geschätzt wurde, wie z. B.
- Bestandteile, mit Ausnahme der Kohorte bedenklicher/ausgeschlossener Chemikalien, die in einer für die Patientenexposition repräsentativen Menge unterhalb einer relevanten, toxikologisch begründeten Berichtsschwelle vorhanden oder extrahierbar sind (siehe ISO 10993-18:2020, Anhang E und ISO/TS 21726), und
- ein neues oder geändertes Medizinprodukt, für das die chemische oder biologische Gleichwertigkeit mit einem vorhandenen biokompatiblen oder klinisch etablierten Medizinprodukt festgestellt wurde (siehe ISO 10993-18:2020, Anhang C).
Außerdem ist das in diesem Dokument beschriebene Verfahren nicht anwendbar auf
- Bestandteile von Medizinprodukten, die nicht mit dem Körper in Kontakt kommen (z. B. In-vitro-Diagnostika),
- alle mit einem Medizinprodukt verbundenen biologischen Risiken (z. B. Schäden, die sich aus einer physikalischen Wechselwirkung (d. h. Anwendung von mechanischen Kräften, Energie oder Oberflächenmorphologie usw.) des Medizinprodukts mit dem Körper ergeben), sofern die chemische Exposition unverändert ist,
- arzneilich wirksame Bestandteile von Produkt-Arzneimittel-Kombinationen oder biologische Komponenten von Produkt-Biologikum-Kombinationen, da hier möglicherweise zusätzliche rechtliche Erwägungen gelten, und
- die Exposition gegenüber einem bestimmten chemischen Bestandteil, der aus anderen Quellen als dem Produkt stammt, z. B. aus der Nahrung, dem Wasser oder der Luft. Dieses Dokument behandelt nicht die mögliche Exposition infolge solcher Quellen.
Évaluation biologique des dispositifs médicaux - Partie 17: Appréciation du risque toxicologique des constituants des dispositifs médicaux (ISO/FDIS 10993-17:2023)
Le présent document spécifie le processus et les exigences pour l'appréciation du risque toxicologique des constituants des dispositifs médicaux. Les méthodes et les critères utilisés pour évaluer si l'exposition à un constituant ne présente pas de dommages significatifs sont également spécifiés. L'appréciation du risque toxicologique peut faire partie de l'évaluation biologique du produit final, comme décrit dans l'ISO 10993-1.
Le processus décrit dans le présent document s'applique aux informations relatives à la caractérisation chimique collectées conformément à l'ISO 10993-18. Lorsqu'une appréciation du risque toxicologique portant sur les informations relatives à la composition ou sur les données de chimie analytique (par exemple, données sur les extractibles ou sur les relargables) est nécessaire pour déterminer si les risques toxicologiques liés aux constituants sont négligeables ou tolérables.
Le processus décrit dans le présent document n'est pas destiné à s'appliquer aux cas où le risque toxicologique a été estimé par d'autres moyens, par exemple:
— les constituants, à l'exclusion de la cohorte préoccupante ou des produits chimiques exclus, qui sont présents ou extraits d'un dispositif médical à une quantité représentative de l'exposition du patient inférieure à un seuil de déclaration pertinent, fondé sur des critères toxicologiques (voir les exigences applicables de l'ISO 10993-18:2020, l'Annexe E et l'ISO/TS 21726);
— un dispositif médical nouveau ou modifié pour lequel une équivalence chimique ou biologique a été établie avec un dispositif médical existant biocompatible ou cliniquement établi (voir les exigences applicables de l'ISO 10993-18:2020, Annexe C).
Par ailleurs, le processus décrit dans le présent document ne s'applique pas:
— aux constituants des dispositifs médicaux qui n'entrent pas en contact avec le corps (par exemple, les dispositifs de diagnostic in vitro);
— aux risques biologiques associés aux interactions physiques du dispositif médical avec le corps (c'est-à-dire l'application de forces mécaniques, d'énergie ou de la morphologie de la surface, etc.), à condition que l'exposition chimique reste inchangée;
— aux ingrédients pharmaceutiques actifs des produits combinés dispositif/médicament ou aux composants biologiques des produits combinés dispositif/substance biologique, selon les considérations réglementaires supplémentaires qui peuvent s'appliquer;
— à l'exposition à un constituant particulier provenant d'autres sources que le dispositif, comme la nourriture, l'eau et l'air.
Biološko ovrednotenje medicinskih pripomočkov - 17. del: Toksikološka ocena tveganja glede sestavin medicinskih pripomočkov (ISO/FDIS 10993-17:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 10993-17:2022
01-januar-2022
Biološko ovrednotenje medicinskih pripomočkov - 17. del: Toksikološka ocena
tveganja glede sestavin medicinskih pripomočkov (ISO/DIS 10993-17:2021)
Biological evaluation of medical devices - Part 17: Toxicological risk assessment of
medical device constituents (ISO/DIS 10993-17:2021)
Biologische Beurteilung von Medizinprodukten - Teil 17: Toxikologische Risikobewertung
von Medizinproduktbestandteilen (ISO/DIS 10993-17:2021)
Évaluation biologique des dispositifs médicaux - Partie 17: (ISO/DIS 10993-17:2021)
Ta slovenski standard je istoveten z: prEN ISO 10993-17
ICS:
11.100.20 Biološko ovrednotenje Biological evaluation of
medicinskih pripomočkov medical devices
oSIST prEN ISO 10993-17:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 10993-17:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 10993-17:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10993-17
ISO/TC 194 Secretariat: DIN
Voting begins on: Voting terminates on:
2021-11-18 2022-02-10
Biological evaluation of medical devices —
Part 17:
Toxicological risk assessment of medical device
constituents
ICS: 11.100.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10993-17:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 10993-17:2022
ISO/DIS 10993-17:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 10993-17:2022
ISO/DIS 10993-17:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviations and terms .6
5 Toxicological risk assessment within the biological evaluation process .7
6 Chemical constituent toxicological information .10
6.1 General . 10
6.2 Obtain and evaluate toxicological information .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.