SIST-TS CEN ISO/TS 80004-13:2024
(Main)Nanotechnologies - Vocabulary - Part 13: Graphene and other two-dimensional (2D) materials (ISO/TS 80004-13:2024)
Nanotechnologies - Vocabulary - Part 13: Graphene and other two-dimensional (2D) materials (ISO/TS 80004-13:2024)
ISO/TS 80004-13:2017 lists terms and definitions for graphene and related two-dimensional (2D) materials, and includes related terms naming production methods, properties and their characterization.
It is intended to facilitate communication between organizations and individuals in research, industry and other interested parties and those who interact with them.
Nanotechnologien - Fachwörterverzeichnis - Teil 13: Graphen und andere zweidimensionale (2D) Werkstoffe (ISO/TS 80004-13:2024)
Dieses Dokument definiert Begriffe für Graphen, mit Graphen verwandte und andere zweidimensionale (2D) Materialien. Es enthält Begriffe im Zusammenhang mit Produktionsmethoden, Eigenschaften und ihrer Cha¬rakterisierung.
Es wird beabsichtigt, die Kommunikation zwischen Organisationen und Einzelpersonen in Forschung und In¬dustrie, anderen interessierten Parteien und denen, die mit diesen interagieren, zu erleichtern.
Nanotechnologies - Vocabulaire - Partie 13: Graphène et autres matériaux bidimensionnels (2D) (ISO/TS 80004-13:2024)
L'ISO/TS 80004-13 :2017 énumère les termes et les définitions pour le graphène et les matériaux bidimensionnels (2D) similaires, et inclut les termes relatifs aux méthodes de production, aux propriétés et aux caractérisations.
L'ISO/TS 80004-13 :2017 est destiné à faciliter la communication entre différents organismes et membres de la recherche, de l'industrie, d'autres parties intéressées, et leurs interlocuteurs.
Nanotehnologije - Slovar - 13. del: Grafen in drugi dvodimenzionalni (2D) materiali (ISO/TS 80004-13:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Nanotehnologije - Slovar - 13. del: Grafen in drugi dvodimenzionalni (2D) materiali
(ISO/TS 80004-13:2024)
Nanotechnologies - Vocabulary - Part 13: Graphene and other two-dimensional (2D)
materials (ISO/TS 80004-13:2024)
Nanotechnologien - Fachwörterverzeichnis - Teil 13: Graphen und andere
zweidimensionale (2D) Werkstoffe (ISO/TS 80004-13:2024)
Nanotechnologies - Vocabulaire - Partie 13: Graphène et autres matériaux
bidimensionnels (2D) (ISO/TS 80004-13:2024)
Ta slovenski standard je istoveten z: CEN ISO/TS 80004-13:2024
ICS:
01.040.07 Naravoslovne in uporabne Natural and applied sciences
vede (Slovarji) (Vocabularies)
07.120 Nanotehnologije Nanotechnologies
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
CEN ISO/TS 80004-13
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
September 2024
TECHNISCHE SPEZIFIKATION
ICS 07.120 Supersedes CEN ISO/TS 80004-13:2020
English Version
Nanotechnologies - Vocabulary - Part 13: Graphene and
other two-dimensional (2D) materials (ISO/DTS 80004-
13:2024)
Nanotechnologies - Vocabulaire - Partie 13: Graphène Nanotechnologien - Fachwörterverzeichnis - Teil 13:
et autres matériaux bidimensionnels (2D) (ISO/DTS Graphen und andere zweidimensionale (2D)
80004-13:2024) Werkstoffe (ISO/DTS 80004-13:2024)
This Technical Specification (CEN/TS) was approved by CEN on 23 August 2024 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 80004-13:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (CEN ISO/TS 80004-13:2024) has been prepared by Technical Committee ISO/TC 229
"Nanotechnologies" in collaboration with Technical Committee CEN/TC 352 “Nanotechnologies” the
secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 80004-13:2020.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO/TS 80004-13:2024 has been approved by CEN as CEN ISO/TS 80004-13:2024 without
any modification.
Technical
Specification
ISO/TS 80004-13
Second edition
Nanotechnologies — Vocabulary —
2024-09
Part 13:
Graphene and other two-
dimensional (2D) materials
Nanotechnologies — Vocabulaire —
Partie 13: Graphène et autres matériaux bidimensionnels (2D)
Reference number
ISO/TS 80004-13:2024(en) © ISO 2024
ISO/TS 80004-13:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO/TS 80004-13:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Terms related to materials .1
3.1.1 General terms related to graphene and other 2D materials.1
3.1.2 Terms related to graphene related 2D materials .5
3.1.3 Terms related to other 2D materials .8
3.2 Terms related to methods for producing 2D materials .9
3.2.1 Graphene and related 2D material production .9
3.2.2 Nanoribbon production . 12
3.3 Terms related to methods for characterizing 2D materials . 13
3.3.1 Structural characterization methods . 13
3.3.2 Chemical characterization methods . 15
3.3.3 Electrical characterization methods .16
3.4 Terms related to 2D materials characteristics .17
3.4.1 Characteristics and terms related to structural and dimensional properties of
2D materials .17
3.4.2 Characteristics and terms related to chemical properties of 2D materials . 20
3.4.3 Characteristics and terms related to optical and electrical properties of 2D
materials .21
4 Abbreviated terms .21
Bibliography .23
Index .24
iii
ISO/TS 80004-13:2024(en)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations,
governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/
IEC Directives, Part 2 (see www.iso.org/directives or www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any
claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had not
received notice of (a) patent(s) which may be required to implement this document. However, implementers
are cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be held
responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html.
In the IEC, see www.iec.ch/understanding-standards.
This document was prepared jointly by Technical Committee ISO/TC 229, Nanotechnologies, and Technical
Committee IEC/TC 113, Nanotechnology for electrotechnical products and systems, and in collaboration with
the European Committee for Standardization (CEN) Technical Committee CEN/TC 352, Nanotechnologies, in
accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). The
draft was circulated for voting to the national bodies of both ISO and IEC.
This second edition cancels and replaces the first edition (ISO/TS 80004-13:2017) which has been technically
revised.
The main changes are as follows:
— addition of the term "graphene-related 2D material (GR2M)";
— expansion of defined terms to include "enhanced", "modified", "enabled" and "based", and derivatives
thereof;
— indication that use of some terms are deprecated.
A list of all parts in the ISO 80004 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO/TS 80004-13:2024(en)
Introduction
Over the last decade, huge interest has arisen in graphene, both scientifically and commercially, due to the
many exceptional properties associated with this material, such as the electrical and thermal conductivity.
More recently, other materials with a structure similar to that of graphene have also shown promising
properties, including:
a) monolayer and few-layer versions of hexagonal boron nitride (hBN);
b) transition me
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.