SIST-TS CEN ISO/TS 20953:2026

Footwear - Performance requirements for components for footwear - Lining and insocks (ISO/TS 20953:2024)

This document establishes the performance requirements for lining and insock components for footwear, irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate compliance with these requirements.
This document applies to lining and insocks for all kinds of footwear as defined in Clause 4.
This document can be used as a reference by the manufacturer and the supplier.

Schuhe - Anforderungen an das Gebrauchsverhalten von Schuhkomponenten - Futter und Einlegesohlen (ISO/TS 20953:2024)

Dieses Dokument legt die Anforderungen an das Gebrauchsverhalten von Futter- und Decksohlenkomponenten für Schuhe, unabhängig vom Material, fest, um die Eignung für die Endanwendung und/oder die Gebrauchstauglichkeit zu beurteilen. Es legt auch die Prüfverfahren fest, mit denen die Erfüllung dieser Anforderungen bewertet wird.
Dieses Dokument gilt für Futter und Decksohlen für alle Arten von Schuhen, wie in Abschnitt 4 definiert.
Dieses Dokument kann vom Hersteller und vom Lieferanten als Referenz verwendet werden.

Chaussures - Exigences de performance pour les composants des chaussures - Doublures et premières de propreté (ISO/TS 20953:2024)

Obutev - Zahtevane lastnosti za sestavne dele obutve - Podloga in vložki (ISO/TS 20953:2024)

Ta dokument določa zahteve glede zmogljivosti za podloge in vložke za obutev, ne glede na material, da se oceni primernost za končno uporabo in/ali ustreznost za namen. Prav tako določa preskusne metode, ki se uporabljajo za oceno skladnosti s temi zahtevami.
Ta dokument velja za podloge in vložke za vse vrste obutve, kot je opredeljeno v točki 4.
Ta dokument lahko uporabljata proizvajalec in dobavitelj kot referenco.

General Information

• Status: Published
• Public Enquiry End Date: 11-Feb-2026
• Publication Date: 12-Apr-2026
• ICS: 61.060 - Footwear
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 03-Apr-2026
• Due Date: 08-Jun-2026
• Completion Date: 13-Apr-2026
• Ref Project: CEN ISO/TS 20953:2026 - Footwear - Performance requirements for components for footwear - Lining and insocks (ISO/TS 20953:2024)

Overview

SIST-TS CEN ISO/TS 20953:2026: Footwear – Performance Requirements for Components for Footwear – Lining and Insocks is a technical specification developed by CEN and ISO, establishing standardized performance requirements for both lining and insock components across all types of footwear. This document is essential for footwear manufacturers and suppliers who need to ensure their products meet industry benchmarks for quality, durability, and end-use suitability. It applies regardless of the material composition of the lining or insock and includes prescribed test methods to verify compliance.

Key Topics

• Performance Criteria: The standard specifies minimum technical requirements for linings and insocks. It defines “essential” requirements that must always be met and “additional” requirements that may be agreed between manufacturers and suppliers.
• Classification: Footwear products are classified into four categories (A to D) based on exposure and end use - from slight (e.g., slippers, fashion shoes, infant shoes) to heavy (e.g., trekking, hiking, work shoes).
• Testing Methods: The specification references international test methods to evaluate properties such as:
  • Tear strength
  • Seam strength
  • Colour fastness to rubbing
  • Abrasion resistance
  • Water vapour permeability and absorption
  • Perspiration resistance
  • Flex resistance (for certain materials)
• Marking and Labelling: If the product complies with all essential requirements, manufacturers may mark the lining or insock as conformant, including details such as product class and manufacturer identification.

Applications

SIST-TS CEN ISO/TS 20953:2026 provides a comprehensive reference tool for the entire footwear supply chain, ensuring consistent evaluation and high standards of product quality. Typical applications include:

• Product Development: Designers and material specialists use the standard to select and test suitable lining and insock materials for specific footwear applications.
• Procurement and Quality Assurance: Brands and retailers can require their suppliers to demonstrate compliance, ensuring products meet agreed standards for durability, comfort, and performance.
• Regulatory Compliance: Assists manufacturers and exporters in demonstrating adherence to recognized European and international standards, thus facilitating smoother market entry and legal compliance.
• Consumer Safety and Satisfaction: By standardizing component performance, the risk of product failure is minimized, supporting greater user satisfaction and safety across a wide range of footwear.

Related Standards

For thorough evaluation and harmonized processes, the following related standards are frequently referenced alongside SIST-TS CEN ISO/TS 20953:2026:

• ISO 17694: Test methods for uppers and lining ‒ Flex resistance
• ISO 17696: Test methods for uppers, linings and insocks ‒ Tear strength
• ISO 17697: Test methods for uppers, lining and insocks ‒ Seam strength
• ISO 17699: Water vapour permeability and absorption
• ISO 17700: Colour fastness to rubbing and bleeding
• ISO 17704: Abrasion resistance
• ISO 19952: Footwear vocabulary
• ISO 22649 & ISO 22652: Water absorption/desorption and perspiration resistance

These standards collectively ensure reliable, repeatable evaluation processes for linings and insocks, helping the footwear industry deliver high-quality, durable, and comfortable products worldwide.

---

Keywords: footwear standards, insock performance requirements, lining test methods, ISO/TS 20953, CEN ISO/TS 20953, footwear component quality, footwear testing, shoe manufacturing compliance, shoe lining standards

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2026
Obutev - Zahtevane lastnosti za sestavne dele obutve - Podloga in vložki (ISO/TS
20953:2024)
Footwear - Performance requirements for components for footwear - Lining and insocks
(ISO/TS 20953:2024)
Schuhe - Anforderungen an das Gebrauchsverhalten von Schuhkomponenten - Futter
und Einlegesohlen (ISO/TS 20953:2024)
Chaussures - Exigences de performance pour les composants des chaussures -
Doublures et premières de propreté (ISO/TS 20953:2024)
Ta slovenski standard je istoveten z: CEN ISO/TS 20953:2026
ICS:
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN ISO/TS 20953
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
March 2026
TECHNISCHE SPEZIFIKATION
ICS 61.060
English Version
Footwear - Performance requirements for components for
footwear - Lining and insocks (ISO/TS 20953:2024)
Chaussures - Exigences de performance pour les Schuhe - Anforderungen an das Gebrauchsverhalten
composants des chaussures - Doublures et premières von Schuhkomponenten - Futter und Einlegesohlen
de propreté (ISO/TS 20953:2024) (ISO/TS 20953:2024)
This Technical Specification (CEN/TS) was approved by CEN on 20 March 2026 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 20953:2026 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO/TS 20953:2024 has been prepared by Technical Committee ISO/TC 216 "Footwear” of
the International Organization for Standardization (ISO) and has been taken over as
held by UNE.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO/TS 20953:2024 has been approved by CEN as CEN ISO/TS 20953:2026 without any
modification.
Technical
Specification
ISO/TS 20953
First edition
Footwear — Performance
2024-11
requirements for components for
footwear — Lining and insocks
Chaussures — Exigences de performance pour les composants des
chaussures — Doublures et premières de propreté
Reference number
ISO/TS 20953:2024(en) © ISO 2024

ISO/TS 20953:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO/TS 20953:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Requirements . 2
5.1 General .2
5.2 Essential and additional performance requirements for lining .2
5.3 Essential and additional performance requirements for insock .4
6 Marking and labelling . 6

iii
ISO/TS 20953:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be n
...