iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ENV 13282:2001

(Main)

Hydraulic road binders - Composition, specifications and conformity criteria

Hydraulic road binders - Composition, specifications and conformity criteria

This European standard is applicable to hydraulic road binders produced in a factory and supplied ready for use in roadbases, sub-bases, capping layers, and for soil stabilization or soil improvement. It specifies the mechanical, physical and chemical requirements for hydraulic road binders, together with the conformity criteria and evaluation procedures to be applied by the manufacturer.

Hydraulische Tragschichtbinder - Zusammensetzung, Anforderungen und Konformitätskriterien

Diese Europäische Vornorm gilt für hydraulische Tragschichtbinder, die in einem Werk produziert und gebrauchs-fertig für die Verwendung in Tragschichten, unteren Tragschichten, Deckschichten sowie für Bodenverfestigungen und Bodenverbesserungen geliefert werden. Diese Vornorm definiert die mechanischen, physikalischen und chemi-schen Anforderungen für hydraulische Tragschichtbinder sowie die Konformitätskriterien und die vom Hersteller anzuwen-denden Bewertungsverfahren.

Liants hydrauliques routiers - Composition, spécifications et criteres de conformité

La présente norme européenne est applicable aux liants hydrauliques routiers produits en usine et distribués prets a l'emploi, destinés a etre utilisés dans les couches de base, les couches de fondation et dans les couches de forme, ainsi que dans la stabilisation et le traitement des sols. Elle spécifie les exigences mécaniques, physiques et chimiques des liants hydrauliques routiers, ainsi que les criteres de conformité et les méthodes d'évaluation que le fabricant s'applique.

Hidravlična veziva za ceste - Sestava, zahteve in merila skladnosti

General Information

Status
Withdrawn
Publication Date
31-Jan-2001
Withdrawal Date
22-May-2013
ICS
93.080.20 - Road construction materials
Technical Committee
CAA - Mineral binders and masonry
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
16-May-2013
Due Date
08-Jun-2013
Completion Date
23-May-2013
Directive
89/106/EEC - Construction products
Mandate
M/114 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on cements, buliding limes, and other hydr. binders
Ref Project
ENV 13282:2000 - Hydraulic road binders - Composition, specifications and conformity criteria

Relations

Revises
kSIST FprEN 13282-2:2012 - Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria
Effective Date
18-Jan-2023
Replaced By
SIST EN 13282-1:2013 - Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria
Effective Date
01-Jun-2013
Replaced By
SIST EN 13282-2:2015 - Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria
Effective Date
01-Jul-2015
Revises
kSIST FprEN 13282-2:2012 - Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria
Effective Date
19-Jan-2023
Replaced By
SIST EN 13282-2:2015 - Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria
Effective Date
08-Jun-2022
Revises
kSIST FprEN 13282-2:2012 - Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria
Effective Date
08-Jun-2022
Replaced By
SIST EN 13282-1:2013 - Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria
Effective Date
08-Jun-2022
Revised
kSIST FprEN 13282-2:2012 - Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria
Effective Date
01-Mar-2010
Replaced By
SIST EN 13282-3:2013 - Hydraulic road binders - Part 3: Conformity evaluation
Effective Date
01-Jun-2013

Buy Standard

ENV 13282:2001ENV 13282:2001
PreviousNext
Standardization document
ENV 13282:2001
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 13282:2001
01-februar-2001
+LGUDYOLþQDYH]LYD]DFHVWH6HVWDYD]DKWHYHLQPHULODVNODGQRVWL
Hydraulic road binders - Composition, specifications and conformity criteria
Hydraulische Tragschichtbinder - Zusammensetzung, Anforderungen und
Konformitätskriterien
Liants hydrauliques routiers - Composition, spécifications et criteres de conformité
Ta slovenski standard je istoveten z: ENV 13282:2000
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST ENV 13282:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 13282:2001

---------------------- Page: 2 ----------------------

SIST ENV 13282:2001

---------------------- Page: 3 ----------------------

SIST ENV 13282:2001

---------------------- Page: 4 ----------------------

SIST ENV 13282:200
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13282-2:2015(Main)
Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria
EN 13282-2:2015

This European Standard defines and gives the specifications for normal hardening hydraulic road binders, produced in a factory and supplied ready for treatment of materials for bases, sub-bases and capping layers as well as earthworks, in road, railway, airport and other types of infrastructures.
It includes the mechanical, physical and chemical requirements and the classification of these binders based on their compressive strength at 56 days. It also includes the conformity criteria and evaluation procedures to be applied by the manufacturer.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13282-3:2015(Main)
Hydraulic road binders - Part 3: Conformity evaluation
EN 13282-3:2015

This European Standard specifies the scheme for the evaluation of conformity of hydraulic road binders to their corresponding product specification standards EN 13282-1 and FprEN 13282-2.
This European Standard provides technical rules for factory production control by the manufacturer, including autocontrol testing of samples. It also provides rules for actions to be followed in the event of non-conformity.
This European Standard should be linked with Annexes ZA of European Standards covering hydraulic road binders, i.e. EN 13282-1 and FprEN 13282-2, in particular for the assignments of tasks to the manufacturer and to the certification body.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13282-1:2013(Main)
Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria
EN 13282-1:2013

This European Standard defines and gives the specifications for rapid hardening hydraulic road binders, produced in a factory and supplied ready for treatment of materials for bases, sub-bases and capping layers as well as earthworks, in road, railway, airport and other types of infrastructure. It includes the mechanical, physical and chemical requirements and the classification of these binders based on their compressive strength at 7 days and 28 days. It also includes the conformity criteria and evaluation procedures to be applied by the manufacturer.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN 13282-2:2012(Main)
Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria
FprEN 13282-2

EN 13282-2 defines and gives the specifications for normal hardening hydraulic road binders. This European Standard is applicable to normal hardening hydraulic road binders produced in a factory and supplied ready for treatment of materials for bases, sub-bases and cappying layers as well as earthworks, in road, railway, airport and other type of infrastructure. It specifies the mechanical, physical and chemical requirements for normal hardening hydraulic road binders, together with the conformity criteria and evaluation procedures to be applied by the manufacturer.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 13282-3:2023(Main)
Hydraulic road binders - Part 3: Assessment and verification of constancy of performance
prEN 13282-3

This document specifies the scheme for the assessment and verification of constancy of performance (AVCP) of hydraulic road binders, including certification of conformity of the factory production control.
This document provides technical rules for factory production control, further testing of samples taken at the manufacturing plant (autocontrol testing), assessment of the performance of the hydraulic road binder, initial inspection of the manufacturing plant and of factory production control and continuing surveillance, assessment and evaluation of factory production control.
This document is intended to be linked with the Annexes ZA of the European Standards covering hydraulic road binders, i.e. EN 13282-1 and EN 13282-2.
NOTE   The reason for having drafted this separate document is that the provisions it includes are applicable to different products covered by different European Standards.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 13282-3:2023(Main)
Hydraulic road binders - Part 3: Assessment and verification of constancy of performance
prEN 13282-3

This document specifies the scheme for the assessment and verification of constancy of performance (AVCP) of hydraulic road binders, including certification of conformity of the factory production control.
This document provides technical rules for factory production control, further testing of samples taken at the manufacturing plant (autocontrol testing), assessment of the performance of the hydraulic road binder, initial inspection of the manufacturing plant and of factory production control and continuing surveillance, assessment and evaluation of factory production control.
This document is intended to be linked with the Annexes ZA of the European Standards covering hydraulic road binders, i.e. EN 13282-1 and EN 13282-2.
NOTE   The reason for having drafted this separate document is that the provisions it includes are applicable to different products covered by different European Standards.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11819-1:2023(Main)
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:2023)
EN ISO 11819-1:2023

This document specifies a method of comparing traffic noise on different road surfaces for various compositions of road traffic for the purpose of evaluating different road surface types. Sound levels representing either light or heavy vehicles at selected speeds are assigned to a certain road surface. The method is applicable to traffic travelling at constant speed, i.e. free-flowing conditions at posted speeds of 50 km/h and upwards. For conditions where traffic is not free flowing, such as at junctions and where the traffic is congested, the method is not applicable.
A standard method for comparing the noise characteristics of road surfaces gives road and environment authorities a tool for establishing common practices or limits regarding the use of road surfaces meeting certain noise criteria. However, it is not within the scope of ISO 11819 (all parts) to suggest such criteria.
The statistical pass-by (SPB) method is suitable for use for the following main purposes:
—    to classify road surfaces according to their influence on traffic noise (surface classification);
—    to assist in verifying conformity of production of road surfaces;
—    to evaluate acoustic performance of road surfaces throughout operation relative to new condition;
—    to evaluate the influence of different road surfaces on traffic noise at sites irrespective of condition and service time;
—    to evaluate acoustic performance of a road surface relative to a reference surface.
Due to practical restrictions, the method cannot be applied at all possible locations. However, the backing board method can allow some locations to be tested that were not previously acceptable.
Clause 5 gives a general description of the SPB method.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12697-4:2023(Main)
Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column
EN 12697-4:2023

This European Standard specifies a test method for the recovery of soluble bitumen from bituminous mixtures from pavements in a form suitable for further testing. The procedure is suitable for the recovery of paving grade bitumen and is also suitable for mixtures containing volatile matter such as cut-back bitumen but the results may be less precise. This European Standard is the reference method for mixtures containing volatile matter, but the rotary evaporator procedure (see EN 12697-3) for mixtures with paving grade bitumen.
NOTE   There is limited experience of recovery when polymer-modified bitumen is used.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12697-43:2023(Main)
Bituminous mixtures - Test methods - Part 43: Resistance to fuel
EN 12697-43:2023

This document specifies a test method to determine the resistance of a bituminous mixture or pavement to fuels. The procedure involves initial soaking of a test specimen made in the laboratory or cored from a pavement in a fuel, followed by a brushing period with a brush test device. The material loss of the specimen is a measure of the resistance to that fuel for that bituminous mixture.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12697-41:2023(Main)
Bituminous mixtures - Test methods - Part 41: Resistance to de-icing fluids
EN 12697-41:2023

This document specifies a test method to determine the resistance of bituminous materials to de-icing fluids such as solutions of acetate and formate. The procedure determines the surface tensile strength of a specimen of asphalt which has been stored in de-icing fluid.
This document is primarily used as a test on asphalt to be laid on airfields, but it can be used for asphalt to be laid on roads or other paved areas.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day