SIST EN 61300-3-21:2016
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time (IEC 61300-3-21:2014)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time (IEC 61300-3-21:2014)
This part of IEC 61300 is a method to measure the switching time and related performance
parameters of an optical switch when the actuation energy is applied or removed to change the
state of the switch.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-21: Untersuchungen und Messungen - Schaltzeit
Dispositifs d’interconnexion et composants passifs à fibres optiques - Procédures fondamentales d'essais et de mesures - Partie 3-21: Examens et mesures - Temps de commutation
L'IEC 61300-3-21:2014 comprend une méthode en vue de mesurer le temps de commutation et les paramètres de performances associés d'un commutateur optique, lorsque l'énergie d'activation est appliquée ou enlevée pour modifier l'état du commutateur. Cette deuxième édition annule et remplace la première édition parue en 1998. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédentes: - suppression dans le titre de 'temps de rebondissement'; - mise à jour et alignement des définitions avec l'IEC 60876-1; - généralisation des appareils de détection autres que les oscilloscopes. Mots clés : temps de commutation, paramètres de performances associés d'un commutateur optique, énergie d'activation
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 3-21. del: Preiskave in meritve - Preklopni čas (IEC 61300-3-21:2014)
Ta del standarda IEC 61300 je metoda za merjenje preklopnega časa in povezanih parametrov zmogljivosti optičnega stikala ob vklopu ali izklopu napajanja za spremembo stanja stikala.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61300-3-21:2016
01-marec-2016
1DGRPHãþD
SIST EN 61300-3-21:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXVQLLQPHULOQL
SRVWRSNLGHO 3UHLVNDYHLQPHULWYH3UHNORSQLþDV ,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-21: Examinations and measurements - Switching time
(IEC 61300-3-21:2014)
Ta slovenski standard je istoveten z: EN 61300-3-21:2015
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-3-21:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61300-3-21:2016
---------------------- Page: 2 ----------------------
SIST EN 61300-3-21:2016
EUROPEAN STANDARD EN 61300-3-21
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2015
ICS 33.180.20 Supersedes EN 61300-3-21:1998
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 3-21:
Examinations and measurements - Switching time
(IEC 61300-3-21:2014)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-
mesures - Partie 3-21: Examens et mesures - Temps de 21: Untersuchungen und Messungen - Schaltzeit
commutation (IEC 61300-3-21:2014)
(IEC 61300-3-21:2014)
This European Standard was approved by CENELEC on 2014-05-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61300-3-21:2015 E
---------------------- Page: 3 ----------------------
SIST EN 61300-3-21:2016
EN 61300-3-21:2015
European foreword
The text of document 86B/3623/CDV, future edition 2 of IEC 61300-3-21, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-3-21:2015.
The following dates are fixed:
(dop) 2016-06-18
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-12-18
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61300-3-21:1998.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61300-3-21:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60876-1 NOTE Harmonized as EN 60876-1.
2
---------------------- Page: 4 ----------------------
SIST EN 61300-3-21:2016
EN 61300-3-21:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 -
passive components - Basic test and
measurement procedures -- Part 1:
General and guidance
IEC 61300-3-4 - Fibre optic interconnecting devices and EN 61300-3-4 -
passive components - Basic test and
measurement procedures -- Part 3-4:
Examinations and measurements -
Attenuation
3
---------------------- Page: 5 ----------------------
SIST EN 61300-3-21:2016
---------------------- Page: 6 ----------------------
SIST EN 61300-3-21:2016
IEC 61300-3-21
®
Edition 2.0 2014-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures –
Part 3-21: Examinations and measurements – Switching time
Dispositifs d’interconnexion et composants passifs à fibres optiques –
Procédures fondamentales d'essais et de mesures –
Partie 3-21: Examens et mesures – Temps de commutation
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX L
ICS 33.180.20 ISBN 978-2-8322-1536-4
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 61300-3-21:2016
– 2 – IEC 61300-3-21:2014 © IEC 2014
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Apparatus . 7
4.1 General description . 7
4.2 Optical source (S) . 7
4.3 Excitation unit (E) . 7
4.4 Detector (D) . 7
4.5 Actuation energy supply . 7
4.6 Data Acquisition System (DAS) . 7
4.7 Termination (T) . 7
4.8 Temporary joint (TJ) . 8
5 Procedure . 8
6 Details to be specified . 9
Bibliography . 10
Figure 1 – Measurement set-up using a 2-channel oscilloscope as DAS to measure a
single output port . 8
Figure 2 – Example of a port moving to an on-state or off-state . 9
---------------------- Page: 8 ----------------------
SIST EN 61300-3-21:2016
IEC 61300-3-21:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 3-21: Examinations and measurements – Switching time
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61300-3-21 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.