Eye and face protection for occupational use - Part 4: Additional requirements for protection against biological hazards (ISO/DIS 16321-4:2023)

This Standard specifies minimum requirements for eye and face protectors designed to provide
protection for the eyes and faces of biological hazards, such as human or animal bodily fluids and
microorganisms including viruses and other particulates.
Requirements for spray, splash and spurt protection are given and appendices describing appropriate
text methods are included in this Standard.
This document applies to all afocal (plano) and prescription lens protectors and components.
This document does not apply to:
• Protectors specifically intended for protection from impact eg from high speed particles and
fragments, non-solar optical radiation, dusts, molten metals, heat, flame, hot solids, harmful gases,
vapours (and aerosols);
• Protectors specifically for sports,
• Protectors for lasers or non-ionizing radiation

Augen- und Gesichtsschutz für berufliche Anwendungen - Teil 4:Zusätzliche Anforderungen zum Schutz vor biologischen Gefahren (ISO/DIS 16321-4:2023)

Dieses Dokument legt die Mindestanforderungen an Schutzgeräte fest, die zum Schutz der Augen oder der Augen und des Gesichts vor biologischen Gefährdungen, wie z.B. menschlichen oder tierischen Körperflüssig
keiten und Mikroorganismen, bestimmt sind.
Dieses Dokument legt die Anforderungen für Produkte oder Komponenten fest, die sowohl zum einmaligen Gebrauch (Einweg) als auch zur Wiederverwendung (desinfizierbar) bestimmt sind.
Dieses Dokument gilt für alle afokalen (Plan-Sichtscheiben) und Schutzgeräte in Form von Korrektionssicht
scheiben und deren Komponenten.
Dieses Dokument gilt nicht für:
- Schutzgeräte zum Schutz vor bestimmten Gefährdungen, z.B. Stöße von Teilchen mit hoher Geschwindig
keit, schädliche künstliche optische Strahlung, Staub, geschmolzene Metalle, Hitze, Flammen, heiße
körper, schädliche Gase, Dämpfe (siehe ISO16321, Teil1 bis3);
- Schutzgeräte, die speziell für sportliche Aktivitäten vorgesehen sind (siehe Normreihe ISO18527);
- Schutzgeräte für den Umgang mit Lasern (siehe ISO19818-1);
- Atemschutz gegen Aerosole (siehe Normreihe ISO16900).
ANMERKUNG1 Eine Anleitung zur richtigen Auswahl, Verwendung und Pflege ist in AnhangA enthalten.
ANMERKUNG2 Wenn Augen- und Gesichtsschutz in Schutzausrüstungen wie Kapuze, Atemschutzgeräte, die das ganze Gesicht bedecken, Gebläseatemschutz-Geräte (en: powered air-purifying respirator, PAPR) und Kopfbedeckungen inte
griert sind, gelten die entsprechenden Anforderungen dieser Norm für die Komponenten, die Augen und Gesicht schützen.

Protection des yeux et du visage à usage professionnel - Partie 4: Exigences complémentaires pour la protection contre les risques biologiques (ISO/DIS 16321-4:2023)

Zaščita za oči in obraz za poklicno uporabo - 4. del: Dodatne zahteve za zaščito pred biološkimi nevarnostmi (ISO/DIS 16321-4:2023)

General Information

Status
Not Published
Public Enquiry End Date
22-Oct-2023
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
11-Aug-2023
Due Date
29-Dec-2023
Completion Date
23-Oct-2023

Buy Standard

Draft
prEN ISO 16321-4:2023 - BARVE
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 16321-4:2023
01-oktober-2023
Zaščita za oči in obraz za poklicno uporabo - 4. del: Dodatne zahteve za zaščito
pred biološkimi nevarnostmi (ISO/DIS 16321-4:2023)
Eye and face protection for occupational use - Part 4: Additional requirements for
protection against biological hazards (ISO/DIS 16321-4:2023)
Augen- und Gesichtsschutz für berufliche Anwendungen - Teil 4:Zusätzliche
Anforderungen zum Schutz vor biologischen Gefahren (ISO/DIS 16321-4:2023)
Protection des yeux et du visage à usage professionnel - Partie 4: Exigences
complémentaires pour la protection contre les risques biologiques (ISO/DIS 16321-
4:2023)
Ta slovenski standard je istoveten z: prEN ISO 16321-4
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
oSIST prEN ISO 16321-4:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 16321-4:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 16321-4:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16321-4
ISO/TC 94/SC 6 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-08-01 2023-10-24
Eye and face protection for occupational use —
Part 4:
Additional requirements for protection against biological
hazards
ICS: 13.340.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 16321-4:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 16321-4:2023
ISO/DIS 16321-4:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16321-4
ISO/TC 94/SC 6 Secretariat: BSI
Voting begins on: Voting terminates on:

Eye and face protection for occupational use —
Part 4:
Additional requirements for protection against biological
hazards
ICS: 13.340.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 16321-4:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 16321-4:2023
ISO/DIS 16321-4:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.