SIST-TS CEN/TS 17946:2023
(Main)Helmets for S-EPAC riders
Helmets for S-EPAC riders
This document specifies requirements and test methods for helmets worn by users of speed electrically power assisted bicycles (S-EPACs). This document also specifies requirements and test methods for integrated visors in helmets worn by users of S-EPACS.
Requirements and the corresponding methods of test are given for the following:
- construction, including field of vision;
- shock absorbing properties;
- retention system properties, including chin strap and fastening devices;
- marking and information.
Helme für S-EPAC-Benutzer
Čelade za S-EPAC kolesarje
Ta dokument določa zahteve in preskusne metode za čelade, ki jih nosijo uporabniki hitrih koles z električnim pomožnim pogonom (S-EPAC). Ta dokument določa tudi zahteve in preskusne metode za vizirje, vgrajene v čelade, ki jih nosijo uporabniki hitrih koles z električnim pomožnim pogonom.
Podane so zahteve in ustrezne preskusne metode za naslednja področja:
– izdelavo, vključno z vidnim poljem;
– lastnosti absorpcije udarcev;
– lastnosti zadrževalnega sistema, vključno s pasom za brado in napravami za pripenjanje;
– označevanje in informacije.
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 17946:2023
01-september-2023
Čelade za S-EPAC kolesarje
Helmets for S-EPAC riders
Helme für S-EPAC-Benutzer
Ta slovenski standard je istoveten z: CEN/TS 17946:2023
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
SIST-TS CEN/TS 17946:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 17946:2023
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 17946:2023
CEN/TS 17946
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
July 2023
TECHNISCHE SPEZIFIKATION
ICS 13.340.20
English Version
Helmets for S-EPAC riders
Helme für S-EPAC-Benutzer
This Technical Specification (CEN/TS) was approved by CEN on 12 June 2023 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17946:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 17946:2023
CEN/TS 17946:2023 (E)
Contents Page
European foreword . 4
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Requirements . 9
4.1 Materials . 9
4.2 Construction . 9
4.3 Field of vision . 9
4.4 Shock absorbing capacity . 11
4.5 Durability . 11
4.6 Retention system . 11
4.6.1 General. 11
4.6.2 Chin strap . 11
4.6.3 Fastening device . 11
4.6.4 Colour .
...
SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 17946:2023
01-maj-2023
Čelade za S-EPAC kolesarje
Helmets for S-EPAC riders
Helme für S-EPAC-Benutzer
Ta slovenski standard je istoveten z: FprCEN/TS 17946
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
kSIST-TS FprCEN/TS 17946:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST-TS FprCEN/TS 17946:2023
---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 17946:2023
FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 17946
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
February 2023
ICS 13.340.20
English Version
Helmets for S-EPAC riders
Helme für S-EPAC-Benutzer
This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 158.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 17946:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 17946:2023
FprCEN/TS 17946:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements . 8
4.1 Materials . 8
4.2 Construction . 8
4.3 Field of vision . 8
4.4 Shock absorbing capacity . 10
4.5 Durability . 10
4.6 Retention system . 10
4.6.1 General. 10
4.6.2 Chin strap . 10
4.6.3 Fastening device . 10
4.6.4 Colour . 10
4.6.5 Strength . 10
4.6.6 Effectiveness .
...
SLOVENSKI STANDARD
SIST-TS FprCEN/TS 17946:2023
01-maj-2023
Čelade za S-EPAC kolesarje
Helmets for S-EPAC riders
Helme für S-EPAC-Benutzer
Ta slovenski standard je istoveten z: FprCEN/TS 17946
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
SIST-TS FprCEN/TS 17946:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS FprCEN/TS 17946:2023
---------------------- Page: 2 ----------------------
SIST-TS FprCEN/TS 17946:2023
FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 17946
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
February 2023
ICS 13.340.20
English Version
Helmets for S-EPAC riders
Helme für S-EPAC-Benutzer
This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 158.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 17946:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS FprCEN/TS 17946:2023
FprCEN/TS 17946:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements . 8
4.1 Materials . 8
4.2 Construction . 8
4.3 Field of vision . 8
4.4 Shock absorbing capacity . 10
4.5 Durability . 10
4.6 Retention system . 10
4.6.1 General. 10
4.6.2 Chin strap . 10
4.6.3 Fastening device . 10
4.6.4 Colour . 10
4.6.5 Strength . 10
4.6.6 Effectiveness .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.