iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 455-1:2020+A1:2022/oprA2:2023

(Amendment)

Medical gloves for single use - Part 1: Requirements and testing for freedom of holes

Medical gloves for single use - Part 1: Requirements and testing for freedom of holes

This document specifies requirements and gives the test method for medical gloves for single use in order to determine freedom from holes.

Medizinische Handschuhe zum einmaligen Gebrauch - Teil 1: Anforderungen und Prüfung auf Dichtheit

Gants médicaux non réutilisables - Partie1 : Exigences et essais pour la détection de l'absence de trous

Medicinske rokavice za enkratno uporabo - 1. del: Zahteve in preskusi za ugotavljanje odsotnosti lukenj - Dopolnilo A2

General Information

Status
Not Published
Public Enquiry End Date
30-Mar-2023
ICS
11.140 - Hospital equipment
Technical Committee
VAZ - Healthcare
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
16-Jan-2023
Due Date
05-Jun-2023
Completion Date
06-Apr-2023
Directive
2017/745 - Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017 on medical devices, amending Directive 2001/83/EC, Regulation (EC) No 178/2002 and Regulation (EC) No 1223/2009 and repealing Council Directives 90/385/EEC and 93/42/EEC
Mandate
M/575 - Medical devices in support of Regulation (EU) 2017/745 and in vitro diagnostic medical devices in support of Regulation (EU) 2017/746
Ref Project
EN 455-1:2020+A1:2022/FprA2 - Medical gloves for single use - Part 1: Requirements and testing for freedom of holes

Relations

Amends
SIST EN 455-1:2020+A1:2022 - Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
Effective Date
11-May-2022

Buy Standard

EN 455-1:2020+A1:2022/oprA2:2023EN 455-1:2020+A1:2022/oprA2:2023
PreviousNext
Draft
EN 455-1:2020+A1:2022/oprA2:2023
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 455-1:2020+A1:2022/oprA2:2023
01-marec-2023
Medicinske rokavice za enkratno uporabo - 1. del: Zahteve in preskusi za
ugotavljanje odsotnosti lukenj - Dopolnilo A2
Medical gloves for single use - Part 1: Requirements and testing for freedom of holes
Medizinische Handschuhe zum einmaligen Gebrauch - Teil 1: Anforderungen und
Prüfung auf Dichtheit
Gants médicaux non réutilisables - Partie1 : Exigences et essais pour la détection de
l'absence de trous
Ta slovenski standard je istoveten z: EN 455-1:2020+A1:2022/prA2:2023
ICS:
11.140 Oprema bolnišnic Hospital equipment
SIST EN 455- en,fr,de
1:2020+A1:2022/oprA2:2023
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 455-1:2020+A1:2022/oprA2:2023

---------------------- Page: 2 ----------------------
SIST EN 455-1:2020+A1:2022/oprA2:2023


DRAFT
EUROPEAN STANDARD
EN 455-1:2020+A1:2022
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA2
January 2023
ICS 11.140
English Version

Medical gloves for single use - Part 1: Requirements and
testing for freedom of holes
Gants médicaux non réutilisables - Partie1 : Exigences Medizinische Handschuhe zum einmaligen Gebrauch -
et essais pour la détection de l'absence de trous Teil 1: Anforderungen und Prüfung auf Dichtheit
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 205.

This draft amendment A2, if approved, will modify the European Standard EN 455-1:2020+A1:2022. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 455-
worldwide for CEN national Members. 1:2020+A1:2022/prA2:2023:2023 E

---------------------- Page: 3 ----------------------
SIST EN 455-1:2020+A1:2022/oprA2:2023
EN 455-1:2020+A1:2022/prA2:2023 (E)
Contents Page
European foreword . 3
1 Modifications to the European foreword . 4
2 Modification to Annex A, Guidance on relationship between this European Standard
and the General Safety and Performance Requirements of Regulation (EU) 2017/745
[OJ L 117] aimed to be covered . 4
Annex ZA (informative) Relationship between this European standard and the General
Safety and Performance Requirements of Regulation (EU) 2017/745 aimed to be
covered . 5
2

---------------------- Page: 4 ----------------------
SIST EN 455-1:2020+A1:2022/oprA2:2023
EN 455-1:2020+A1:2022/prA2:2023 (E)
European foreword
This document (EN 455-1:2020+A1:2022/prA2:2023) has been prepared by Technical Committee
CEN/TC 205 “Non-active medical devices”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a Standardization Request given to CEN and CENELEC by the
European Commission and the European Free Trade Association, and supports essential requirements
of EU Directive(s) / Regu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 455-3:2024(Main)
Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
EN 455-3:2023

This part of EN 455 specifies requirements for the evaluation of biological safety for medical gloves for
single use. It gives requirements for labelling and the disclosure of information relevant to the test
methods used.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 455-1:2020+A1:2022(Main)
Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
EN 455-1:2020+A1:2022

This document specifies requirements and gives the test method for medical gloves for single use in order to determine freedom from holes.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14683:2019+AC:2019(Main)
Medical face masks - Requirements and test methods
EN 14683:2019+AC:2019

This document specifies construction, design, performance requirements and test methods for medical face masks intended to limit the transmission of infective agents from staff to patients during surgical procedures and other medical settings with similar requirements. A medical face mask with an appropriate microbial barrier can also be effective in reducing the emission of infective agents from the nose and mouth of an asymptomatic carrier or a patient with clinical symptoms.
This European Standard is not applicable to masks intended exclusively for the personal protection of staff.
NOTE 1   Standards for masks for use as respiratory personal protective equipment are available.
NOTE 2   Annex A provides information for the users of medical face masks.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13795-1:2019(Main)
Surgical clothing and drapes - Requirements and test methods - Part 1: Surgical drapes and gowns
EN 13795-1:2019

This European Standard specifies information to be supplied to users and third party verifiers in addition to the usual labelling of medical devices (see EN 1041 and EN ISO 15223-1), concerning manufacturing and processing requirements. This European Standard gives information on the characteristics of single-use and reusable surgical gowns and surgical drapes used as medical devices for patients, clinical staff and equipment, intended to prevent the transmission of infective agents between clinical staff and patients during surgical and other invasive procedures. This European Standard specifies test methods for evaluating the identified characteristics of surgical drapes and gowns and sets performance requirements for these products.
EN 13795-1 does not cover requirements for resistance to penetration by laser radiation of products. Suitable test methods for resistance to penetration by laser radiation, together with an appropriate classification system, are given in EN ISO 11810.
EN 13795-1 does not cover requirements for incise drapes or films.
EN 13795-1 does not cover requirements for antimicrobial treatments for surgical gowns and drapes. Antimicrobial treatment may cause environmental risks such as resistance and pollution. However, antimicrobial treated surgical gowns and drapes fall under the scope of this standard with respect to their use as surgical gowns and drapes.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13795-2:2019(Main)
Surgical clothing and drapes - Requirements and test methods - Part 2: Clean air suits
EN 13795-2:2019

This European Standard specifies information to be supplied to users and third party verifiers in addition to the usual labelling of medical devices (see EN 1041 and EN ISO 15223-1), concerning manufacturing and processing requirements. This European Standard gives information on the characteristics of single-use and reusable clean air suits used as medical devices for clinical staff, intended to prevent the transmission of infective agents between clinical staff and patients during surgical and other invasive procedures. This European Standard specifies test methods for evaluating the identified characteristics of clean air suits and sets performance requirements for these products.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 16953:2018(Main)
Medical gloves for single use - Guidance for selection
CEN/TR 16953:2017

This Technical Report provides information for those choosing or using sterile and non-sterile gloves for medical applications based on a risk assessment. It deals with gloves worn primarily for the protection of the patient and glove user from biological cross contamination.
NOTE   Gloves worn specifically for the protection of the glove user from e.g. chemical and biological hazards are covered by the EU-Directive on Personal Protective Equipment (PPE) and the related standards e.g. EN 16523 1, EN 374-2, EN 374-4, EN ISO 374-1and EN ISO 374-5.
This document describes the rationale behind the requirements of the EN 455 series and explores the possible trade-offs in glove selection between the various factors which affect glove, physical properties, biocompatibility, comfort and sensitivity. The strengths and weaknesses of various alternative glove materials and the potential biological hazards presented by their use are also explored.

  • Technical report
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 455-2:2015(Main)
Medical gloves for single use - Part 2: Requirements and testing for physical properties
EN 455-2:2015

This European Standard specifies requirements and gives test methods for physical properties of single-use medical gloves (i.e. surgical gloves and examination/procedure gloves) in order to ensure that they provide and maintain in use an adequate level of protection from cross contamination for both patient and user.
This standard does not specify the size of a lot. Attention is drawn to the difficulties that can be associated with the distribution and control of very large lots. The recommended maximum individual lot size for production is 500 000.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16442:2015(Main)
Controlled environment storage cabinet for processed thermolabile endoscopes
EN 16442:2015

The proposed standard specifies the performance requirements applying to cabinets designed to store and dry heat-sensitive endoscopes (SCHE) following automated or manual reprocessing. The storage cabinets are designed to provide a controlled environment for storage of endoscope(s) and when necessary drying of the endoscope(s), including the endoscope(s) channels. The controlled environment is provided to ensure that during storage there is no deterioration of the microbial quality of the endoscope. The drying stage is intended to supplement, if necessary, any drying provided as part of the automated or manual reprocessing cycle. The cabinet is not intended to provide any cleaning or disinfection function. Note 1 The use of a storage cabinet may allow the safe use of the endoscope for an extended period from the time of reprocessing and improve availability for emergency use. Note 2 Thorough drying of an endoscope in a washer-disinfector may require a prolonged cycle time; the use of a drying-storage cabinet may enhance throughput of the endoscopes.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-52:2010(Main)
Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds (IEC 60601-2-52:2009)
EN 60601-2-52:2010

This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of MEDICAL BEDS intended for adults, hereafter referred to as MEDICAL BED as defined in 201.3.212. If a clause or subclause is specifically intended to be applicable to a MEDICAL BED only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to MEDICAL BED and to ME SYSTEMS, as relevant. HAZARDS inherent in the intended physiological function of MEDICAL BED or ME SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 7.2.13 and 8.4.1 of the general standard.

  • Standard
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 455-4:2009(Main)
Medical gloves for single use - Part 4: Requirements and testing for shelf life determination
EN 455-4:2009

This part of EN 455 specifies requirements for shelf life for medical gloves for single use. It also specifies the requirements for labelling and the disclosure of information relevant to the test methods used. This European Standard applies to existing, new and significantly changed designs. Existing designs that do not currently have ageing data available should generate that data within a reasonable period of time. This European Standard does not specify the size of a lot. Attention is drawn to the difficulties that can be associated with the distribution and control of very large lots. The recommended maximum individual lot size for production is 500 000.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day