SIST EN 14617-6:2012

Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance

This European Standard specifies a method to assess possible modifications of agglomerated stones under the effect of sudden changes in temperature (thermal shock) by immersion in hot water.

Künstlich hergestellter Stein - Prüfverfahren - Teil 6: Bestimmung der Temperaturwechselbeständigkeit

Diese Europäische Norm legt ein Verfahren zur Beurteilung möglicher Veränderungen von künstlich hergestellten Steinen unter Einwirkung plötzlicher Temperaturwechsel (Wärmeschock) durch Eintauchen in heißes Wasser fest.

Pierre agglomérée - Méthodes d'essai - Partie 6: Détermination de la résistance au choc thermique

La présente Norme européenne spécifie une méthode d’évaluation d’éventuelles modifications de pierres
agglomérées sous l’effet de variations soudaines de la température (choc thermique) par immersion dans de l’eau
chaude.

Aglomeriran kamen - Preskusne metode - 6. del: Ugotavljanje odpornosti proti temperaturnemu šoku

Ta evropski standard določa metodo za ocenjevanje morebitnih sprememb na aglomeriranem kamnu zaradi nenadnih sprememb temperature (toplotni šok) s potapljanjem v vročo vodo.

General Information

• Status: Published
• Publication Date: 10-Jun-2012
• ICS: 91.100.15 - Mineral materials and products
• Technical Committee: IKER - Ceramics
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jun-2012
• Due Date: 06-Aug-2012
• Completion Date: 11-Jun-2012
• Ref Project: EN 14617-6:2012 - Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance

Relations

• Replaces: SIST EN 14617-6:2005 - Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance
• Effective Date: 01-Jul-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aglomeriran kamen - Preskusne metode - 6. del: Ugotavljanje odpornosti proti temperaturnemu šokuKünstlich hergestellter Stein - Prüfverfahren - Teil 6: Bestimmung der TemperaturwechselbeständigkeitPierre agglomérée - Méthodes d'essai - Partie 6: Détermination de la résistance au choc thermiqueAgglomerated stone - Test methods - Part 6: Determination of thermal shock resistance91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 14617-6:2012SIST EN 14617-6:2012en,fr,de01-julij-2012SIST EN 14617-6:2012SLOVENSKI
STANDARDSIST EN 14617-6:20051DGRPHãþD



SIST EN 14617-6:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14617-6
April 2012 ICS 91.100.15 Supersedes EN 14617-6:2005English Version
Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance
Pierre agglomérée - Méthodes d'essai - Partie 6: Détermination de la résistance au choc thermique
Künstlich hergestellter Stein - Prüfverfahren - Teil 6: Bestimmung der Temperaturwechselbeständigkeit This European Standard was approved by CEN on 9 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14617-6:2012: ESIST EN 14617-6:2012



EN 14617-6:2012 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Symbols .44 Principle .45 Apparatus .46 Preparation of specimen .56.1 Sampling .56.2 Dimensions of the test specimens.56.3 Drying the specimens .57 Procedure .57.1 Control measurements before cycling .57.2 Description of the cycles .57.3 Control measurements after cycling .68 Expression of results .69 Test report .6Bibliography .8 SIST EN 14617-6:2012



EN 14617-6:2012 (E) 3 Foreword This document (EN 14617-6:2012) has been prepared by Technical Committee CEN/TC 246 “Natural stones”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2012, and conflicting national standards shall be withdrawn at the latest by October 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14617-6:2005. 6.3 has been modified since the last edition of this European Standard. This European Standard is one of a series of standards for test methods for agglomerated stones which includes the following:
EN 14617-1, Agglomerated stone — Test methods — Part 1: Determination of apparent density and water absorption
EN 14617-2, Agglomerated stone — Test methods — Part 2: Determination of flexural strength (bending) EN 14617-4, Agglomerated stone — Test methods — Part 4: Determination of the abrasion resistance
EN 14617-5, Agglomerated stone — Test methods — Part 5: Determination of freeze and thaw resistance EN 14617-6, Agglomerated stone — Test methods — Part 6: Determination of thermal shock resistance EN 14617-8, Agglomerated stone — Test methods — Part 8: Determination of resistance to fixing (dowel hole) EN 14617-9, Agglomerated stone — Test methods — Part 9: Determination of impact resistance EN 14617-10, Agglomerated stone — Test methods — Part 10: Determination of chemical resistance EN 14617-11, Agglomerated stone — Test methods — Part 11: Determination of linear thermal expansion coefficient EN 14617-12, Agglomerated stone — Test methods — Part 12: Determination of dimensional stability EN 14617-13, Agglomerated stone — Test methods — Part 13: Determination of electrical resistivity EN 14617-15, Agglomerated stone — Test methods — Part 15: Determination of compressive strength EN 14617-16, Agglomerated stone — Test methods — Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembou
...