SIST EN 14617-6:2005

Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance

This document specifies a method to assess possible modifications of agglomerated stones under the effect of sudden changes in temperature (thermal shock) by immersion in hot water.

Künstlich hergestellter Stein - Prüfverfahren - Teil 6: Bestimmung der Temperaturwechselbeständigkeit

Dieses Dokument legt ein Verfahren zur Beurteilung möglicher Veränderungen von künstlich hergestellten
Steinen unter Einwirkung plötzlicher Temperaturwechsel (Wärmeschock) durch Eintauchen in heißes Wasser
fest.

Pierre agglomérée - Méthodes d'essai - Partie 6: Détermination de la résistance au choc thermique

Le présent document spécifie une méthode d’évaluation d’éventuelles modifications de pierres agglomérées sous l’effet de variations soudaines de la température (choc thermique) par immersion dans de l’eau chaude

Aglomeriran kamen - Preskusne metode - 6. del: Ugotavljanje odpornosti proti temperaturnemu šoku

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-2005
• Withdrawal Date: 03-Jun-2012
• ICS: 91.100.15 - Mineral materials and products
• Technical Committee: KAM - Natural stone
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Jun-2012
• Due Date: 24-Jun-2012
• Completion Date: 04-Jun-2012
• Directive: 89/106/EEC - Construction products
• Mandate: M/119 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on floorings
• Mandate: M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
• Ref Project: EN 14617-6:2005 - Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance

Relations

• Replaced By: SIST EN 14617-6:2012 - Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance
• Effective Date: 01-Jul-2012

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14617-6:2005
01-julij-2005
Aglomeriran kamen - Preskusne metode - 6. del: Ugotavljanje odpornosti proti
temperaturnemu šoku
Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance
Künstlich hergestellter Stein - Prüfverfahren - Teil 6: Bestimmung der
Temperaturwechselbeständigkeit
Pierre agglomérée - Méthodes d'essai - Partie 6: Détermination de la résistance au choc
thermique
Ta slovenski standard je istoveten z: EN 14617-6:2005
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
SIST EN 14617-6:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14617-6:2005

---------------------- Page: 2 ----------------------

SIST EN 14617-6:2005
EUROPEAN STANDARD
EN 14617-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2005
ICS 91.100.15
English version
Agglomerated stone - Test methods - Part 6: Determination of
thermal shock resistance
Pierre agglomérée - Méthodes d'essai - Partie 6: Künstlich hergestellter Stein - Prüfverfahren - Teil 6:
Détermination de la résistance au choc thermique Bestimmung der Temperaturwechselbeständigkeit
This European Standard was approved by CEN on 3 February 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14617-6:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14617-6:2005
EN 14617-6:2005 (E)
Contents
Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Principle.4
4 Symbols and definitions .4
5 Apparatus .4
6 Preparation of specimen.5
7 Procedure .5
8 Expression of results .6
9 Test report .6
Bibliography .8


2

---------------------- Page: 4 ----------------------

SIST EN 14617-6:2005
EN 14617-6:2005 (E)
Foreword
This document (EN 14617-6:2005) has been prepared by Technical Committee CEN/TC 246 “Natural stones”, the
secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by September 2005, and conflicting national standards shall be withdrawn at the
latest by September 2005.
Test methods for agglomerated stones consist of the following:
EN 14617-1, Agglomerated stone - Test methods – Part 1: Determination of apparent density and water absorption
EN 14617-2, Agglomerated stone – Test methods – Part 2: Determination of flexural strength (bending)
prEN 14617-3, Agglomerated stone - Test methods – Part 3: Determination of slipperiness
EN 14617-4, Agglomerated stone - Test methods – Part 4: Determination of the abrasion resistance
EN 14617-5, Agglomerated stone - Test methods – Part 5: Determination of freeze and thaw resistance
EN 14617-6, Agglomerated stone - Test methods – Part 6: Determination of thermal shock resistance
prEN 14617-7, Agglomerated stone – Test methods – Part 7: Determination of ageing
prEN 14617-8, Agglomerated stone – Test methods – Part 8: Determination of resistance to fixing (dowel hole)
EN 14617-9, Agglomerated stone - Test methods – Part 9: Determination of impact resistance
EN 14617-10, Agglomerated stone – Test methods – Part 10: Determination of chemical resistance
EN 14617-11, Agglomerated stone – Test methods – Part 11: Determination of linear thermal expansion coefficient
EN 14617-12, Agglomerated stone – Test methods – Part 12: Determination of dimensional stability
EN 14617-13, Agglomerated stone – Test methods – Part 13: Determination of electrical resistivity
prEN 14617-14, Agglomerated stone – Test methods – Part 14: Determination of surface hardness
EN 14617-15, Agglomerated stone – Test methods – Part 15: Determination of compressive strength
EN 14617-16, Agglomerated stone – Test methods – Part 16: Determination of dimensions, geometric characteristics
and surface quality of modular tiles
prEN 14617-17, Agglomerated stone – Test methods – Part 17: Determination of biological resistance
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 14617-6:2005
EN 14617-6:2005 (E)
1 Scope
This document specifies a method to assess possible modifications of agglomerated stones under the effect of
sudden changes in temperature (
...