SIST EN 4008-001:2009

Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 001: Technical specification

This standard specifies the general characteristics, the conditions for qualification, acceptance and quality as-surance for the crimping tools and associated accessories used for the crimping of contacts defined in EN 3155 002.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Crimpwerkzeuge und zugehöriges Zubehör - Teil 001: Technische Lieferbedingungen

Diese Norm legt die allgemeinen Merkmale, die Qualifikations , Abnahme  und Qualitätssicherungsbedingun¬gen für Crimpwerkzeuge und zugehöriges Zubehör fest, die zum Crimpen von Kontakten nach EN 3155 002 verwendet werden.

Série aérospatiale - Organes de connexion électrique et optique - Outils de sertissage et accessoires associés - Partie 001 : Spécification technique

Aeronavtika - Elementi električnih in optičnih povezav - Orodje za stiskanje in pripadajoča oprema - 001. del: Tehnična specifikacija

General Information

• Status: Published
• Publication Date: 20-May-2009
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 17-Apr-2009
• Due Date: 22-Jun-2009
• Completion Date: 21-May-2009
• Ref Project: EN 4008-001:2006 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 001: Technical specification

Overview

EN 4008-001:2006 - Aerospace series, Part 001 - defines the technical specification for crimping tools and associated accessories used in aerospace electrical and optical connections. Published under CEN/ASD‑STAN, the standard specifies the general characteristics, qualification, acceptance and quality‑assurance requirements for tools used to crimp contacts listed in EN 3155-002. It complements existing guidance in MIL‑C‑22520 and aligns tool design and testing with aerospace installation rules.

Key topics and technical requirements

• Scope and product description
  • Applies to crimping tools (manual, electric, pneumatic), positioners, crimping die sets and other accessories used for aerospace contacts.
• Design requirements
  • Tools shall be designed to meet the product standard requirements and permit application of EN 3197 installation rules.
• Characteristics
  • Functional and interchangeability dimensions, overall dimensions and mass are specified in the associated product standard.
• Testing
  • Qualification and performance tests follow MIL‑C‑22520 unless the product standard states otherwise.
• Quality assurance
  • Qualification procedures, maintenance of qualification and quality control follow EN 9133 and the referenced test methods.
  • 100% visual inspection of production batches is required per EN 2591‑101, unless purchaser directs otherwise.
• Marking, packaging and storage
  • Marking must include the identity block (per product standard), manufacture date and manufacturer identification; packaging is individual and labelled.
• Designation
  • Specific designation rules are delegated to each product standard.

Applications and who uses the standard

• Aerospace OEMs and suppliers designing or supplying crimping tools, dies and positioners.
• Quality, procurement and compliance teams ensuring tool qualification and acceptance for aerospace production.
• Maintenance, repair and overhaul (MRO) organizations and installation teams applying EN 3197 rules.
• Test laboratories performing qualification tests referenced to MIL‑C‑22520 and EN test methods.
• Standards developers and procurement engineers specifying tool requirements for electrical and optical interconnection systems.

Related standards (key references)

• EN 3155-002 - Contacts list and utilization
• MIL‑C‑22520 - Crimping tool test and qualification procedures (referenced)
• EN 2591-100 / EN 2591-101 - General and visual test methods
• EN 3197 - Installation of aircraft electrical/optical interconnection systems
• EN 9133 - Quality management / qualification for aerospace standard parts

EN 4008-001:2006 ensures consistent, qualified crimping tool design and quality assurance for aerospace electrical and optical connections, enabling interoperability, traceability and reliable field performance.

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Crimpwerkzeuge und zugehöriges Zubehör - Teil 001: Technische LieferbedingungenSérie aérospatiale - Organes de connexion électrique et optique - Outils de sertissage et accessoires associés - Partie 001 : Spécification techniqueAerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4008-001:2006SIST EN 4008-001:2009en,de01-julij-2009SIST EN 4008-001:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4008-001July 2006ICS 49.060 English VersionAerospace series - Elements of electrical and optical connection- Crimping tools and associated accessories - Part 001:Technical specificationSérie aérospatiale - Organes de connexion électrique etoptique - Outils de sertissage et accessoires associés -Partie 001 : Spécification techniqueLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Crimpwerkzeug und zugehörigesZubehör - Teil 001: Technische LieferbedingungenThis European Standard was approved by CEN on 6 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4008-001:2006: ESIST EN 4008-001:2009
...