oSIST prEN ISO 2811-1:2022

Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO/DIS 2811-1:2022)

ISO 2811-1:2016 specifies a method for determining the density of paints, varnishes and related products using a metal or Gay-Lussac pycnometer.
The method is limited to materials of low or medium viscosity at the temperature of test. The Hubbard pycnometer (see ISO 3507) can be used for highly viscous materials.

Beschichtungsstoffe - Bestimmung der Dichte - Teil 1: Pyknometer-Verfahren (ISO/DIS 2811-1:2022)

Peintures et vernis - Détermination de la masse volumique - Partie 1: Méthode pycnométrique (ISO/DIS 2811-1:2022)

ISO 2811-1:2016 spécifie une méthode de détermination de la masse volumique des peintures, vernis et produits assimilés au moyen d'un pycnomètre en métal ou d'un pycnomètre de Gay-Lussac.
La méthode est limitée aux produits de viscosité faible ou moyenne à la température d'essai Le pycnomètre de Hubbard (voir l'ISO 3507) peut être utilisé pour les produits à forte viscosité.

Barve in laki - Ugotavljanje gostote - 1. del: Metoda s piknometrom (ISO/DIS 2811-1:2022)

General Information

• Status: Not Published
• Public Enquiry End Date: 01-Jul-2022
• ICS: 87.040 - Paints and varnishes
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 06-May-2022
• Due Date: 23-Sep-2022
• Completion Date: 23-Jun-2022
• Ref Project: prEN ISO 2811-1 - Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO/DIS 2811-1:2022)

RELATIONS

• Revised: SIST EN ISO 2811-1:2016 - Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
• Effective Date: 01-Jun-2022

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN ISO 2811-1:2022
01-junij-2022

Barve in laki - Ugotavljanje gostote - 1. del: Metoda s piknometrom (ISO/DIS 2811-

1:2022)

Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO/DIS

2811-1:2022)

Beschichtungsstoffe - Bestimmung der Dichte - Teil 1: Pyknometer-Verfahren (ISO/DIS

2811-1:2022)
Peintures et vernis - Détermination de la masse volumique - Partie 1: Méthode
pycnométrique (ISO/DIS 2811-1:2022)
Ta slovenski standard je istoveten z: prEN ISO 2811-1
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 2811-1:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 2811-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 2811-1:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 2811-1
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
2022-04-15 2022-07-08
Paints and varnishes — Determination of density —
Part 1:
Pycnometer method
Peintures et vernis — Détermination de la masse volumique —
Partie 1: Méthode pycnométrique
ICS: 87.040
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 2811-1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 2811-1:2022
ISO/DIS 2811-1:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 2811-1:2022
ISO/DIS 2811-1:2022(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ..................................................................................................................................................................................... 1

3 Terms and definitions .................................................................................................................................................................................... 1

4 Principle ........................................................................................................................................................................................................................ 1

5 Temperature ............................................................................................................................................................................................................ 1

6 Apparatus .................................................................................................................................................................................................................... 2

7 Sampling ....................................................................................................................................................................................................................... 3

8 Procedure ....................................................................................................................................................................................................................3

8.1 General ........................................................................................................................................................................................................... 3

8.2 Determination ......................................................................................................................................................................................... 3

9 Calculation .................................................................................................................................................................................................................. 4

10 Precision ....................................................................................................................................................................................................................... 5

10.1 Repeatability limit, r ........................................................................................................................................... ............................... 5

10.2 Reproducibility limit, R ................................................................................................................................................................... 5

11 Test report .................................................................................................................................................................................................................. 5

Annex A (informative) Example of a calibration method .............................................................................................................. 6

Annex B (informative) Temperature variation ........................................................................................................................................ 8

Bibliography .............................................................................................................................................................................................................................10

iii
© ISO 2022 – All rights reserved
---------------------- Page: 5 ----------------------
oSIST prEN ISO 2811-1:2022
ISO/DIS 2811-1:2022(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to

the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www.iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee

SC 9, General test methods for paints and varnishes.

This fourth edition cancels and replaces the third edition (ISO 2811-1:2016), which has been technically

revised.
The main changes are as follows:

— a requirement to de-areate the sample prior to the determination in order to achieve reproducible

results for the density has been added to 8.2;

— the text has been editorially revised and the normative references have been updated.

A list of all parts in the ISO 2811 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www.iso.org/members.html.
© ISO 2022 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 2811-1:2022
DRAFT INTERNATIONAL STANDARD ISO/DIS 2811-1:2022(E)
Paints and varnishes — Determination of density —
Part 1:
Pycnometer method
1 Scope

This document specifies a method for determining the density of paints, varnishes and related products

using a metal or Gay-Lussac pycnometer.

The method is limited to materials of low or medium viscosity at the temperature of test. The Hubbard

pycnometer (see ISO 3507) can be used for highly viscous materials.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 1513, Paints and varnishes — Examination and preparation of test samples
ISO 3696, Water for analytical laboratory use — Specification and test methods

ISO 15528, Paints, varnishes and raw materials for paints and varnishes — Sampling

3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminology databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
density
mass divided by the volume of a portion of a material
Note 1 to entry: It is expressed in grams per cubic centimetre.
4 Principle

A pycnometer is filled with the product under test. The density is calculated from the mass of the

product in the pycnometer and the known volume of the pycnometer.
5 Temperature

The effect of temperature on density is highly significant with respect to filling properties, and varies

with the type of product.
© ISO 2022 – All rights reserved
---------------------- Page: 7 ----------------------
oSIST prEN ISO 2811-1:2022
ISO/DIS 2811-1:2022(E)

For international reference purposes, it is essential to standardize one test temperature, and

(23,0 ± 0,5) °C is specified in this document. It can be more convenient, however, to carry out comparative

testing at some other agreed temperature, for example (20,0 ± 0,5) °C, as specified by relevant weights

and measures legislation (see B.2).

The test sample and pycnometer shall be conditioned to the specified or agreed temperature, and it

shall be ensured that the temperature variation does not exceed 0,5 °C during testing.

6 Apparatus
Ordinary laboratory apparatu
...