SIST EN 61300-2-46:2007

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-46: Tests - Damp heat cyclic

The purpose of this part of IEC 61300 is to describe a test to determine the suitability of a fibre optic device to withstand the environmental condition of high humidity and change of temperature which may occur in actual use, storage and/or transport. The test is primarily intended to determine the suitability of fibre optic components under conditions of high humidity;combined with cyclic temperature changes and, in general, producing condensation on the surface of the specimen. Absorption of moisture may result in swelling that would destroy functional utility, cause loss of physical strength, and cause changes in other important mechanical properties. Degradation of optical properties may also occur. Although not necessarily intended as a simulated tropical test, this test can, nevertheless, be useful in determining moisture absorption of insulating or covering materials.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren -- Teil 2-46: Prüfungen - Feuchte Wärme (zyklisch)

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures -- Partie 2-46: Essais - Chaleur humide, essai cyclique

L'essai est d'abord destiné à déterminer l'aptitude des composants à fibres optiques à être utilisés dans des conditions hautement humides - combinées avec des changements de température cycliques et, produisant en général de la condensation sur la surface de l'éprouvette.

Optični spojni elementi in pasivne komponente – Osnovni preskuševalni in merilni postopki – 2-46. del: Preskušanje – Ciklična vlažna vročina (IEC 61300-2-46:2006)

General Information

• Status: Withdrawn
• Publication Date: 16-Jul-2007
• Withdrawal Date: 31-May-2020
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Jun-2020
• Due Date: 24-Jun-2020
• Completion Date: 01-Jun-2020
• Ref Project: EN 61300-2-46:2006 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat cyclic

Relations

• Replaced By: SIST EN IEC 61300-2-46:2019 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic (IEC 61300-2-46:2019)
• Effective Date: 14-May-2019
• Revised: SIST EN IEC 61300-2-46:2019 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic (IEC 61300-2-46:2019)
• Effective Date: 07-Jun-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-46:2007
01-september-2007
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH±2VQRYQLSUHVNXãDOQLLQPHULOQL
SRVWRSNL±GHO3UHVNXãDQMH±&LNOLþQDYODåQDYURþLQD,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 2-46: Tests - Damp heat cyclic (IEC 61300-2-46:2006)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren -- Teil 2-46: Prüfungen - Feuchte Wärme (zyklisch) (IEC 61300-2-
46:2006)
Dispositifs d'interconnexion et composants passifs a fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 2-46: Essais - Chaleur humide, essai
cyclique (IEC 61300-2-46:2006)
Ta slovenski standard je istoveten z: EN 61300-2-46:2006
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-46:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61300-2-46

NORME EUROPÉENNE
August 2006
EUROPÄISCHE NORM

ICS 33.180.20


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures
Part 2-46: Tests -
Damp heat cyclic
(IEC 61300-2-46:2006)


Dispositifs d'interconnexion et Lichtwellenleiter -
composants passifs à fibres optiques - Verbindungselemente und
Méthodes fondamentales d'essais et passive Bauteile -
de mesures Grundlegende Prüf- und
Partie 2-46: Essais - Messverfahren
Chaleur humide, essai cyclique Teil 2-46: Prüfungen -
(CEI 61300-2-46:2006) Feuchte Wärme (zyklisch)
(IEC 61300-2-46:2006)




This European Standard was approved by CENELEC on 2006-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-46:2006 E

---------------------- Page: 2 ----------------------

EN 61300-2-46:2006 - 2 -
Foreword
The text of document 86B/2304/FDIS, future edition 1 of IEC 61300-2-46, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-46 on 2006-08-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-46:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61300-3-1 NOTE  Harmonized as EN 61300-3-1:2005 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61300-2-46:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 60068-2-30 - Environmental testing EN 60068-2-30 2005
Part 2-30: Tests - Test Db: Damp heat, cyclic
(12 h + 12 h cycle)


1) 2)
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 2003
passive components - Basic test and
measurement procedures
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
IEC



61300-2-46
INTERNATIONAL


Première édition
STANDARD

First edition

2006-07


Dispositifs d'interconnexion et composants
passifs à fibres optiques – Méthodes
fondamentales d'essais et de mesures –
Partie 2-46:
Essais – Chaleur humide, essai cyclique

Fibre optic interconnecting devices and passive
components – Basic test and measurement
procedures –
Part 2-46:
Tests – Damp heat, cyclic

 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
K
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

61300-2-46  IEC:2006 – 3 –
CONTENTS

FOREWORD.5

1 Scope.9
2 Normative reference .9
3 General description .9
4 Apparatus.11
5 Procedure.11
6 Severity.13
7 Details to be specified .17

---------------------- Page: 6 ----------------------

61300-2-46  IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 2-46: Tests – Damp heat, cyclic


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
...