iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13451-4:2002

(Main)

Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms

Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms

This part of prEN 136.008 specifies safety requirements for starting platforms in addition to the general safety requirements of prEN 136.008-1. The requirements of this specific standard take priority over those in the general standard. This part of prEN 136.008 is applicable to manufactured starting platforms for use in competition and training.

Schwimmbadgeräte - Teil 4: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Startblöcke

1 Anwendungsbereich
Dieser Teil der EN 13451 legt sicherheitstechnische Anforderungen für Startblöcke zusätzlich zu den allgemeinen
sicherheitstechnischen Anforderungen nach EN 13451-1:2001 fest.
Die Anforderungen dieser besonderen Norm haben Vorrang gegenüber EN 13451-1:2001.
Dieser Teil der EN 13451:2001 gilt für fabrikmäßig hergestellte Startblöcke zum Gebrauch bei Wettkämpfen und
beim Training.

Equipement de piscine - Partie 4: Exigences de sécurité et méthodes d'essai complémentaires spécifiques aux plots départ

Domaine d'application
La présente partie de l'EN 13451 spécifie des exigences de sécurité pour les plots départ, venant compléter les exigences générales de sécurité du prEN 13451-1:2000.
Les exigences présentées dans cette norme spécifique ont la priorité sur celles du prEN 13451-1:2000.
La présente partie du prEN 13451:2000 s'applique aux plots départ préfabriqués, utilisés pour la compétition et l'entraînement.

Oprema za plavalne bazene - 4. del: Dodatne posebne varnostne zahteve in preskusne metode za štartne bloke

General Information

Status
Withdrawn
Publication Date
31-Aug-2002
Withdrawal Date
20-Oct-2014
ICS
97.220.10 - Sports facilities
Technical Committee
SPO - Sports
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Oct-2014
Due Date
13-Nov-2014
Completion Date
21-Oct-2014
Ref Project
EN 13451-4:2001 - Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms

Relations

Replaced By
SIST EN 13451-4:2014 - Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms
Effective Date
01-Dec-2014

Buy Standard

EN 13451-4:2002EN 13451-4:2002
PreviousNext
Standard
EN 13451-4:2002
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za plavalne bazene - 4. del: Dodatne posebne varnostne zahteve in preskusne metode za štartne blokeSchwimmbadgeräte - Teil 4: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für StartblöckeEquipement de piscine - Partie 4: Exigences de sécurité et méthodes d'essai complémentaires spécifiques aux plots départSwimming pool
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12230:2023(Main)
Surfaces for sports areas - Test method for the determination of tensile properties of synthetic sports surfaces
EN 12230:2023

This document specifies three methods for the determination of the tensile properties of materials used as surfaces, elastic layers and shockpads for sports areas.
Method 1 measures the tensile strength of homogenous test specimens that are less than 25 mm in thickness.
Method 2 measures the transversal tensile strength of homogenous test specimens that are more than 25 mm in thickness.
Method 3 measures the tensile strength of sports surfaces or shockpads that are non-homogenous and contain slots or grooves cut into their structure.
This document is applicable both to prefabricated sheet materials and to materials formed by casting of liquid systems cured in- situ.
NOTE   If the nature of the sports surface is such that a properly representative test piece cannot be prepared in the manner described in this document, then determination of tensile properties should not be attempted for quality control purposes, or as a predictor of performance in use. With such materials, it can be more appropriate to determine their compressive properties or other dynamic characteristics for these purposes.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12616:2023(Main)
Surfaces for sports areas - Test methods for the determination of vertical water infiltration and horizontal water flow rates
EN 12616:2023

This European Standard has two parts.
Part 1 specifies four methods for the determination of the vertical water infiltration rate of different types of sports surfacing.
Method A is suitable for measuring the vertical water infiltration rate of synthetic, textile and synthetic turf sports surfaces in the laboratory.
Method B is suitable for on-site measurements of the Vertical Water Infiltration Rate of synthetic, textile, synthetic turf and bound mineral sports surfaces.
Method C is suitable for on-site measurements of the vertical water infiltration rate of natural turf sports surfaces.
Method D is suitable for measuring the for on-site measurements of the vertical water infiltration rate of unbound mineral sports surfaces.
NOTE   For filled synthetic turf and unbound mineral surfaces, laboratory tests are considered to give a more precise indication of how a surface will perform.
Part 2 specifies a method for determining the horizontal water flow rate of synthetic, textile and synthetic turf surfaces in the laboratory.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15330-4:2023(Main)
Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 4: Specification for shockpads used with synthetic turf, needle-punch and textile sports surfaces
EN 15330-4:2022

This European Standard specifies minimum performance and durability requirements for shockpads and elastic layers used within synthetic turf, needle-punch and textile sports surfaces. It applies to any shockpad used as an elastic component in sports surfacing system.  
The Standard describes how the performance of a shockpad or elastic layer shall be measured, and the results classified in a common format to enable developers of sports surfacing systems that wish to use shockpads or elastic layers to select the most appropriate shockpad or elastic layer for their intended sports surface.  
It also details the maximum changes in performance a shockpad or elastic layer should experience when subjected to artificial ageing if it is to offer satisfactory long-term performance when installed within a sports surfacing system.  The Standard also specifies appropriate performance tolerance for production and on-site quality control procedures.
Note1: The sports performance characteristics of a synthetic turf, needle-punch or textile sports surface are provided by the combined characteristics of the playing surface, any infill within the playing surface pile and any shockpad. The selection of the correct permutations of each is complex and the responsibility of the sports surface designer. It is important to take these facts into account when considering the performance of a shockpad; a shockpad alone should not be expected to satisfy the performance requirements of the complete playing surface as specified in EN 15330-1 and EN 15330-2.
Note 2: This Standard only refers to the shockpad or elastic layer. It makes no recommendations on sub-base constructions or the different synthetic turf for needle-punch textile sports surface designs.  
Note 3: Some types of shockpad are also intended to provide structural properties to the base of a sports facility.  These aspects of a shockpad’s performance are not considered by this European Standard.  Where appropriate compliance with national standards and guidelines for these aspects should be followed.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13451-11:2023(Main)
Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads installed in pools for public use
EN 13451-11:2022

This part of EN 13451 specifies the safety requirements and the means of their verification for the design and construction of moveable pool floors and moveable bulkheads for use in classified swimming pools as specified in EN 15288-1 and EN 15288-2.
This part of EN 13451 when used with EN 13451-1 deals with the significant hazards, hazardous situations and events, as listed in Annex A, relevant to this equipment when used as intended and under the conditions of misuse reasonably foreseeable by the manufacturer during normal operation and service.
When requirements of this part of EN 13451 are different from those which are stated in EN 13451-1, the requirements of this part of EN 13451 take precedence over the requirements of EN 13451-1 for machines that have been designed and built according to the requirements of this part of EN 13451.
The requirements of this part of EN 13451 take priority over those in EN 13451-1.
This document doesn’t apply to installations or equipment intended to move people into or out of a pool tank.
This part of EN 13451 is not applicable to equipment which is manufactured before the date of its publication as EN.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23659:2023(Main)
Sports and recreational facilities - Trampoline parks - Safety requirements (ISO 23659:2022)
EN ISO 23659:2022

This European Standard applies to trampoline parks and their components.
This European Standard specifies safety requirements for the design, construction, inspection and maintenance of trampoline parks and their components.
This European Standard also specifies minimum operational requirements to ensure an appropriate level of safety and service when used for recreational, training, educational or therapeutic purposes.
This European Standard does not apply to
-trampolines defined as gymnastic equipment according to EN 13219:2001,
-trampolines for domestic use according to EN 7114:2014+A1:2017, and
-children's playgrounds (see EN 1176 all parts).

  • Standard
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13451-3:2022(Main)
Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features installed in pools for public use
EN 13451-3:2022

This document specifies safety requirements and test methods for inlets and outlets for water/air and water/air based leisure features involving water movement, in addition to the general safety requirements of EN 13451-1.
The requirements of this specific standard take priority over those in EN 13451-1.
This part of EN 13451 is applicable to swimming pool equipment installed in pools for public use designed for:
-   the introduction and/or extraction of water for treatment or leisure purposes;
-   the introduction of air for leisure purposes;
-   water leisure features involving the movement of water.
NOTE   The above items are identified with the general term devices.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17467:2022(Main)
Surfaces for sports areas - Test method for the determination of the residual deformation of synthetic or organic infill granules after static load
EN 17467:2022

This document describes a test method for the determination of the residual deformation and visual inspection of synthetic or organic granules used in synthetic turf for sports surfaces after static load.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17435:2022(Main)
Surfaces for sports areas - Test method for the determination of Head Injury Criterion (HIC) and Critical Fall Height (CFH)
EN 17435:2021

This document specifies test methods for measuring the Head Injury Criterion (HIC) of sports surfaces. Two different methods are specified. In Procedure A, a series of tests are undertaken from differing drop heights and the HIC values are plotted, and the Critical Fall Height determined. In Procedure B, a series of tests are made at a fixed drop height and the mean value of HIC is calculated.
This test method is primarily intended for use on synthetic turf sport surfaces. It may be carried out in a laboratory on test specimens or in situ on installed sports surfaces.
NOTE    Annex A contains an indicative test method where a single test is made at each drop height and an indicative value of HIC is calculated. This test method can also be used on other forms of sports surfacing that may be intended to provide impact protection against head impacts.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13451-1:2021(Main)
Swimming pool equipment - Part 1: General safety requirements and test methods for equipment installed in pools for public use
EN 13451-1:2020

This European Standard specifies general safety requirements and test methods for equipment used in classified swimming pools as specified in EN 15288-1 and EN 15288-2.
Where specific standards exist, this general standard should not be used alone.
Special care is required in applying this general standard alone to equipment for which no product specific standard has yet been published.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17519:2020(Main)
Surfaces for sports areas - Synthetic turf sports facilities - Guidance on how to minimize infill dispersion into the environment
CEN/TR 17519:2020

This document describes ways of containing infill materials used in many types of synthetic turf sports fields within the confines of the sports field, so they are not dispersed into the surrounding environment.
The options described are based on examples of best practice identified by members of CEN/TC 217.
This document is intended to be of practical use, to create awareness amongst field designers, venue owners, installation companies and those maintaining synthetic turf sports fields. It is applicable for all forms of synthetic turf sports field, from those used for community activities to those used by professional and elite level athletes.

  • Technical report
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day