iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN IEC 62391-2:2024

(Main)

Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specfication - Electric double layer capacitors for power application

Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specfication - Electric double layer capacitors for power application

Elektrische Doppelschichtfestkondensatoren zur Verwendung in Geräten der Elektronik – Teil 2: Rahmenspezifikation: Elektrische Doppelschichtfestkondensatoren für Leistungsanwendungen

Condensateurs électriques fixes à double couche utilisés dans les équipements électroniques - Partie 2: Spécification intermédiaire - Condensateurs électriques à double couche pour application de puissance

Fiksni električni dvoplastni kondenzatorji za elektronsko opremo – 2. del: Področna specifikacija – Električni dvoplastni kondenzatorji za elektroenergetske aplikacije

General Information

Status
Not Published
Public Enquiry End Date
20-Jun-2024
ICS
31.060.10 - Fixed capacitors
Technical Committee
I11 - Imaginarni 11
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
10-Apr-2024
Due Date
28-Aug-2024
Completion Date
18-Jun-2024
Ref Project
prEN IEC 62391-2:2024 - Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specfication - Electric double layer capacitors for power application

Relations

Revises
SIST EN 62391-2:2006 - Fixed electric double-layer capacitors for use in electronic equipment -- Part 2: Sectional specification - Electric double-layer capacitors for power application
Effective Date
31-Jan-2023

Buy Standard

prEN IEC 62391-2:2024prEN IEC 62391-2:2024
PreviousNext
Draft
prEN IEC 62391-2:2024
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 62391-2:2024
01-junij-2024
Fiksni električni dvoplastni kondenzatorji za elektronsko opremo – 2. del:
Področna specifikacija – Električni dvoplastni kondenzatorji za elektroenergetske
aplikacije
Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional
specfication - Electric double layer capacitors for power application
Condensateurs électriques fixes à double couche utilisés dans les équipements
électroniques - Partie 2: Spécification intermédiaire - Condensateurs électriques à
double couche pour application de puissance
Ta slovenski standard je istoveten z: prEN IEC 62391-2:2024
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
oSIST prEN IEC 62391-2:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 62391-2:2024

---------------------- Page: 2 ----------------------
oSIST prEN IEC 62391-2:2024
40/3122/CDV
COMMITTEE DRAFT FOR VOTE (CDV)

PROJECT NUMBER:
IEC 62391-2 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-03-29 2024-06-21
SUPERSEDES DOCUMENTS:
40/3070/CD, 40/3108/CC

IEC TC 40 : CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT
SECRETARIAT: SECRETARY:
Netherlands Mr Ronald Drenthen
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional
specfication - Electric double layer capacitors for power application

PROPOSED STABILITY DATE: 2034

NOTE FROM TC/SC OFFICERS:

Copyright © 2024 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 62391-2:2024
IEC CDV 62391-2 © IEC 2024 - 2 - 40/3122/CDV

1 CONTENTS
2
3 FOREWORD . 4
4 1 Scope . 6
5 2 Normative references . 6
6 3 Terms and definitions . 7
7 4 Preferred rating and characteristics . 7
8 4.1 Preferred characteristics . 7
9 4.2 Preferred values of ratings . 8
10 5 Test and measurement procedures, and performance requirement . 8
11 5.1 General . 8
12 5.2 Preliminary drying . 8
13 5.3 Test conditions and measuring conditions . 8
14 5.4 Visual examination and check of dimensions . 9
15 5.5 Electrical tests . 9
16 5.6 Robustnes
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60384-23:2023(Main)
Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors (IEC 60384-23:2023)
EN IEC 60384-23:2023

This part of IEC 60384 is applicable to fixed surface mount capacitors for direct current, with
metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment.
These capacitors have metallized connecting pads or soldering strips and are intended to be
mounted directly onto printed boards or onto substrates for hybrid circuits. These capacitors
can have "self-healing properties" depending on conditions of use. They are primarily intended
for applications where the AC component is small with respect to the rated voltage.
This part of IEC 60384 specifies preferred ratings and characteristics, selects from
IEC 60384‑1:2021 the appropriate quality assessment procedures, tests and measuring
methods and gives general performance requirements for this type of capacitor. Test severities
and requirements specified in detail specifications referring to this sectional specification are
of an equal or higher performance level. Lower performance levels are not permitted.
Capacitors for electromagnetic interference suppression are not included, but are covered by
IEC 60384‑14.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60384-20:2023(Main)
Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount DC capacitors (IEC 60384-20:2023)
EN IEC 60384-20:2023

IEC 60384-20:2023 is available as which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60384-20:2023 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyphenylene sulfide dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto printed boards or onto substrates for hybrid circuits. These capacitors can have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the AC component is small with respect to the rated voltage. This part of IEC 60384 specifies preferred ratings and characteristics and selects from IEC 60384-1:2021 the appropriate quality assessment procedures, tests and measuring methods, and gives general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this sectional specification are of an equal or higher performance level; lower performance levels are not permitted. Capacitors for electromagnetic interference suppression are not included but are covered by IEC 60384‑14. This edition includes the following significant technical changes with respect to the previous edition:
- revision of all parts of the document based on the ISO/IEC Directives, Part 2:2021, and harmonization with other similar kinds of documents;
- the document structure has been organized to follow new sectional specification structure decided in TC 40;
- revised tables and Clause 5 so as to prevent duplications and contradictions;
- in Clause 5.2 (Mounting), the Subclauses 5.2.1, 5.2.2 and 5.2.3 have been added;
- in Subclause 5.5 (Shear test), the Subclauses 5.5.1 and 5.5.2 have been added;
- in Subclause 5.14 (Component solvent resistance), the Subclauses 5.14.1 and 5.14.2 have been added. In Table 8 and Table A.2, test 5.14 has been moved before 5.7.5 (Final inspections and requirements) in Group 1A and in Subgroup C1;
- in Subclause 5.15 (Solvent resistance of marking), the Subclauses 5.15.1 and 5.15.2 have been added;
- tangent of loss angle measurement has been added to resistance to soldering heat test;
- lot-by-lot and periodical inspection tables, including requirements, have been moved to Annex A;
- revised Inspection Level (IL) of A1 subgroup.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60384-14:2023(Main)
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (IEC 60384-14:2023)
EN IEC 60384-14:2023

IEC 60384-14:2023 applies to capacitors and resistor-capacitor combinations intended to be connected to AC mains or other supply with a nominal voltage not exceeding 1 000 V AC (RMS), and with a nominal frequency not exceeding 100 Hz. This document includes also additional specific conditions and requirements for the connection to DC supplies with a rated voltage not exceeding 1 500 V DC. The principal object of this part of IEC 60384 is to prescribe preferred ratings and characteristics and to select, from IEC 60384-1, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification are of equal or higher performance level; lower performance levels are not permitted. This document also provides a schedule of safety tests to be used by national testing stations in countries where approval by such stations is required. The overvoltage categories in combination with the AC mains voltages for the capacitors classified in this document are to be taken from IEC 60664-1. This edition includes the following significant technical changes with respect to the previous edition:
- in damp heat steady state test, all capacitor types are tested both with and without rated voltage; the number of test pieces has been increased ;
- tangent of loss angle is added In Group 0 tests, in safety tests
- qualification approval based on safety and performance tests has been removed from the main text to a normative annex;
- the range of rated voltages is given instead of exact rated voltage values;
- normative annex for description of capacitor styles and of creepage/clearance distance measurement has been added;
- the importance of mechanical failures (cracks) in component encapsulation as a safety feature is highlighted in handling instructions and requirements after all relevant tests.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62391-1:2023(Main)
Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification (IEC 62391-1:2022)
EN IEC 62391-1:2022

This part of IEC 62391 applies to fixed electric double-layer capacitors (hereafter referred to as
capacitors) mainly used in DC circuits of electric and electronic equipment.
This part of IEC 62391 establishes standard terms, inspection procedures and methods of test
for use in sectional and detail specifications of electronic components for quality assessment
or any other purpose.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60384-19:2022(Main)
Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene terephthalate film dielectric surface mount DC capacitors (IEC 60384-19:2022)
EN IEC 60384-19:2022

This part of IEC 60384 is applicable to fixed surface mount capacitors for direct current, with
metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment.
These capacitors have metallized connecting pads or soldering strips and are intended to be
mounted directly onto printed boards or onto substrates for hybrid circuits. These capacitors
can have "self-healing properties" depending on conditions of use. They are primarily intended
for applications where the AC component is small with respect to the rated voltage.
This part of IEC 60384 specifies preferred ratings and characteristics, and selects from
IEC 60384-1:2021 the appropriate quality assessment procedures, tests and measuring
methods, and gives general performance requirements for this type of capacitor. Test severities
and requirements specified in detail specifications referring to this sectional specification are
of an equal or higher performance level. Lower performance levels are not permitted.
Capacitors for electromagnetic interference suppression are not included, but are covered by
IEC 60384-14.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60384-1-1:2022(Main)
Fixed capacitors for use in electronic equipment - Part 1-1 : Generic blank detail specification (IEC 60384-1-1:2022)
EN IEC 60384-1-1:2022

This part of IEC 60384-1 establishes a generic template and specifies requirements to the
content of detail specifications for capacitors within the IEC 60384-X series.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60384-1:2021(Main)
Fixed capacitors for use in electronic equipment - Part 1: Generic specification (IEC 60384-1:2021)
EN IEC 60384-1:2021

This part of IEC 60384 is a generic specification and is applicable to fixed capacitors for use in electronic equipment.
It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60384-2:2021(Main)
Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric DC capacitors (IEC 60384-2:2021)
EN IEC 60384-2:2021

This part of IEC 60384 applies to fixed capacitors for direct current, with metallized electrodes
and polyethylene-terephthalate dielectric for use in electronic equipment.
These capacitors have a possibility of "self-healing properties" depending on conditions of use.
They are primarily intended for applications where the AC component is small with respect to
the rated voltage. Two performance grades of capacitors are covered: grade 1 for long-life
application and grade 2 for general application.
Capacitors for electromagnetic interference suppression and surface mount fixed metallized
polyethylene-terephthalate film dielectric DC capacitors are not included, but are covered by
IEC 60384-14 and IEC 60384-19, respectively.
The object of this document is to prescribe preferred ratings and characteristics and to select
from IEC 60384-1 the appropriate quality assessment procedures, tests and measuring
methods, and to give general performance requirements for this type of capacitor. Test
severities and requirements prescribed in detail specifications referring to this sectional
specification are of equal or higher performance level, because lower performance levels are
not permitted.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60384-17:2019/AC:2021(Corrigendum)
Fixed capacitors for use in electronic equipment - Part 17: Sectional specification - Fixed metallized polypropylene film dielectric AC and pulse capacitors (IEC 60384-17:2019/COR1:2020)
EN IEC 60384-17:2019/AC:2021-01

2021-01-15 - IEC Corrected Version.

  • Corrigendum
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60384-13:2021(Main)
Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil DC capacitors (IEC 60384-13:2020)
EN IEC 60384-13:2020

This part of IEC 60384 specifies preferred ratings and characteristics, selects from
IEC 60384-1:2016 the appropriate quality assessment procedures, tests and measuring
methods, and gives general performance requirements for this type of capacitor. Test
severities and requirements specified in detail specifications referring to this sectional
specification are of an equal or higher performance level. Lower performance levels are not
permitted.
This part of IEC 60384 applies to fixed direct current capacitors, using as dielectric a
polypropylene film with electrodes of thin metal foils. The capacitors covered by this
document are intended for use in electronic equipment.
Capacitors for electromagnetic interference suppression are not included, but are covered by
IEC 60384-14.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day