iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 3838:2004/oprA1:2023

(Amendment)

Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods - Amendment 1 (ISO 3838:2004/DAM 1:2023)

Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods - Amendment 1 (ISO 3838:2004/DAM 1:2023)

Rohöl und flüssige oder feste Mineralölerzeugnisse - Bestimmung der Dichte oder der relativen Dichte - Verfahren mittels Pyknometer mit Kapillarstopfen und Bikapillar-Pyknometer mit Skale - Änderung 1 (ISO 3838:2004/DAM 1:2023)

Pétrole brut et produits pétroliers liquides ou solides - Détermination de la masse volumique ou de la densité - Méthodes du pycnomètre à bouchon capillaire et du pycnomètre bicapillaire gradué - Amendement 1 (ISO 3838:2004/DAM 1:2023)

Surova nafta in tekoči ali trdni naftni proizvodi - Določanje gostote ali relativne gostote - Metoda s piknometrom s kapilarnim zamaškom in metoda z graduiranim bikapilarnim piknometrom - Dopolnilo A1 (ISO 3838:2004/DAM 1:2023)

General Information

Status
Not Published
Public Enquiry End Date
28-Sep-2023
ICS
75.040 - Crude petroleum
75.080 - Petroleum products in general
Technical Committee
NAD - Petroleum products, lubricants and related products
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
05-Jul-2023
Due Date
22-Nov-2023
Completion Date
29-Sep-2023
Ref Project
EN ISO 3838:2004/prA1 - Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods - Amendment 1 (ISO 3838:2004/DAM 1:2023)

Relations

Amends
SIST EN ISO 3838:2004 - Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
Effective Date
01-Sep-2023

Buy Standard

EN ISO 3838:2004/oprA1:2023EN ISO 3838:2004/oprA1:2023
PreviousNext
Draft
EN ISO 3838:2004/oprA1:2023
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3838:2004/oprA1:2023
01-september-2023
Surova nafta in tekoči ali trdni naftni proizvodi - Določanje gostote ali relativne
gostote - Metoda s piknometrom s kapilarnim zamaškom in metoda z graduiranim
bikapilarnim piknometrom - Dopolnilo A1 (ISO 3838:2004/DAM 1:2023)
Crude petroleum and liquid or solid petroleum products - Determination of density or
relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer
methods - Amendment 1 (ISO 3838:2004/DAM 1:2023)
Rohöl und flüssige oder feste Mineralölerzeugnisse - Bestimmung der Dichte oder der
relativen Dichte - Verfahren mittels Pyknometer mit Kapillarstopfen und Bikapillar-
Pyknometer mit Skale - Änderung 1 (ISO 3838:2004/DAM 1:2023)
Pétrole brut et produits pétroliers liquides ou solides - Détermination de la masse
volumique ou de la densité - Méthodes du pycnomètre à bouchon capillaire et du
pycnomètre bicapillaire gradué - Amendement 1 (ISO 3838:2004/DAM 1:2023)
Ta slovenski standard je istoveten z: EN ISO 3838:2004/prA1
ICS:
75.040 Surova nafta Crude petroleum
75.080 Naftni proizvodi na splošno Petroleum products in
general
SIST EN ISO 3838:2004/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 3838:2004/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 3838:2004/oprA1:2023
DRAFT AMENDMENT
ISO 3838:2004/DAM 1
ISO/TC 28/SC 2 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-06-22 2023-09-14
Crude petroleum and liquid or solid petroleum products —
Determination of density or relative density — Capillary-
stoppered pyknometer and graduated bicapillary
pyknometer methods
AMENDMENT 1
Pétrole brut et produits pétroliers liquides ou solides — Détermination de la masse volumique ou de la
densité — Méthodes du pycnomètre à bouchon capillaire et du pycnomètre bicapillaire gradué
AMENDEMENT 1
ICS: 75.080
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 3838:2004/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
SIST EN ISO 3838:2004/oprA1:2023
ISO 3838:2004/DAM 1:2023(E)
DRAFT AMENDMENT
ISO 3838:2004/DAM 1
ISO/TC 28/SC 2 Secretariat: BSI
Voting begins on: Voting terminates on:

Crude petroleum and liquid or solid petroleum products —
Determination of density or relative density — Capillary-
stoppered pyknometer and graduated bicapillary
pyknometer methods
AMENDMENT 1
Pétrole brut et produits pétroliers liquides ou solides — Détermination de la masse volumique ou de la
densité — Méthodes du pycnomètre à bouchon capillaire et du pycnomètre bicapillaire gradué
AMENDEMENT 1
ICS: 75.080
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO 3838:2004/DAM 1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 3838:2004(Main)
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
EN ISO 3838:2004

ISO 3838:2004 specifies methods for the determination of the density or relative density of crude petroleum and of petroleum products handled as liquids.
The capillary-stoppered pyknometer method is also for use with solids and this method may also be used for coal tar products, including road tars, creosote and tar pitches, or for mixtures of these with petroleum products. This method is not suitable for the determination of the density or relative density of highly volatile liquids having Reid vapour pressures greater than 50 kPa according to ISO 3007 or having an initial boiling point below 40 degrees Celsius.
The graduated bicapillary pyknometer method is recommended for the accurate determination of the density or relative density of all except the more viscous products, and is particularly useful when only small amounts of samples are available. The method is restricted to liquids having Reid vapour pressures of 130 kPa or less according to ISO 3007 and having kinematic viscosities less than 50 mm2/s (50 centistokes (cSt)) at the test temperature.
Special precautions are specified for the determination of the density or relative density of highly volatile liquids.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 3007:2002(Main)
Petroleum products and crude petroleum -- Determination of vapour pressure -- Reid method
ISO 3007:1999

This International Standard specifies a method for the determination of the vapour pressure of liquid petroleum
products consisting of essentially or wholly of hydrocarbon components, or containing oxygenated hydrocarbons of
specific types and at specified maximum concentrations. The method does not apply outside these concentration
levels, nor to any blends containing methanol or other oxygenated hydrocarbons not covered in note 1.
NOTE 1 The maximum concentration of ethers containing 5 or more carbon atoms is 15 % (V/V), and for ethanol is 10 %
(V/V). For higher alcohols, the maximum concentration is 7 % (V/V).
NOTE 2 For the purposes of this International Standard, the term "%(V/V)" is used to represent the volume fraction of a
material.
For petroleum products containing methanol, or other oxygenated hydrocarbons outside the scope of note 1, a dry
vapour-pressure test method should be used. For liquefied petroleum gases, ISO 4256 should be used. The test
method may be applied to volatile crude petroleum with a vapour pressure exceeding 10 kPa, although the
precision has not been evaluated.
Four procedures are described in this International Standard. Procedures A and B are alternative apparatus
configurations for products with a Reid vapour pressure up to 180 kPa, Procedure C is applied to liquid products
with a Reid vapour pressure above 180 kPa, and Procedure D applies to aviation gasolines with a Reid vapour
pressure of approximately 50 kPa.
Vapour pressure is an important physical property of volatile liquids, and has critical performance implications for
automotive and aviation gasolines. Vapour pressure is also one of the properties affecting atmospheric evaporation,
and is therefore increasingly used in regulations relating to emissions and air quality control. Vapour pressure is
also a critical property limiting the performance and safety of operation of equipment during transfer operations.
NOTE Because the external atmospheric pressure is counteracted by the atmospheric pressure initially in the vapour
chamber, the Reid vapour pressure is approximately the "absolute" vapour pressure at 37,8 °C. The Reid vapour pressure
differs from the true vapour pressure of the sample owing to slight vaporization of the sample and the pressure of water vapour
and air in the confined space.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
SIST
SIST EN ISO 3675:1999(Main)
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
EN ISO 3675:1998

Migrated from Progress Sheet (TC Comment) (2000-07-10): Revision of EN ISO 3675:1995

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12185:1998(Main)
Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
EN ISO 12185:1996

Gives a method for the determination, using an oscillation U-tube densitometer, of the density of crude petroleum and related products within the range 600 kg/m^3 to 1 100 kg/m^3 which can be handled as single-phase liquids at the test temperature and pressure.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 12185:2023(Main)
Crude petroleum, petroleum products and related products - Determination of density - Laboratory density meter with an oscillating U tube sensor (ISO/DIS 12185:2022)
prEN ISO 12185
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3838:2004(Main)
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
EN ISO 3838:2004

ISO 3838:2004 specifies methods for the determination of the density or relative density of crude petroleum and of petroleum products handled as liquids.
The capillary-stoppered pyknometer method is also for use with solids and this method may also be used for coal tar products, including road tars, creosote and tar pitches, or for mixtures of these with petroleum products. This method is not suitable for the determination of the density or relative density of highly volatile liquids having Reid vapour pressures greater than 50 kPa according to ISO 3007 or having an initial boiling point below 40 degrees Celsius.
The graduated bicapillary pyknometer method is recommended for the accurate determination of the density or relative density of all except the more viscous products, and is particularly useful when only small amounts of samples are available. The method is restricted to liquids having Reid vapour pressures of 130 kPa or less according to ISO 3007 and having kinematic viscosities less than 50 mm2/s (50 centistokes (cSt)) at the test temperature.
Special precautions are specified for the determination of the density or relative density of highly volatile liquids.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 3007:2002(Main)
Petroleum products and crude petroleum -- Determination of vapour pressure -- Reid method
ISO 3007:1999

This International Standard specifies a method for the determination of the vapour pressure of liquid petroleum
products consisting of essentially or wholly of hydrocarbon components, or containing oxygenated hydrocarbons of
specific types and at specified maximum concentrations. The method does not apply outside these concentration
levels, nor to any blends containing methanol or other oxygenated hydrocarbons not covered in note 1.
NOTE 1 The maximum concentration of ethers containing 5 or more carbon atoms is 15 % (V/V), and for ethanol is 10 %
(V/V). For higher alcohols, the maximum concentration is 7 % (V/V).
NOTE 2 For the purposes of this International Standard, the term "%(V/V)" is used to represent the volume fraction of a
material.
For petroleum products containing methanol, or other oxygenated hydrocarbons outside the scope of note 1, a dry
vapour-pressure test method should be used. For liquefied petroleum gases, ISO 4256 should be used. The test
method may be applied to volatile crude petroleum with a vapour pressure exceeding 10 kPa, although the
precision has not been evaluated.
Four procedures are described in this International Standard. Procedures A and B are alternative apparatus
configurations for products with a Reid vapour pressure up to 180 kPa, Procedure C is applied to liquid products
with a Reid vapour pressure above 180 kPa, and Procedure D applies to aviation gasolines with a Reid vapour
pressure of approximately 50 kPa.
Vapour pressure is an important physical property of volatile liquids, and has critical performance implications for
automotive and aviation gasolines. Vapour pressure is also one of the properties affecting atmospheric evaporation,
and is therefore increasingly used in regulations relating to emissions and air quality control. Vapour pressure is
also a critical property limiting the performance and safety of operation of equipment during transfer operations.
NOTE Because the external atmospheric pressure is counteracted by the atmospheric pressure initially in the vapour
chamber, the Reid vapour pressure is approximately the "absolute" vapour pressure at 37,8 °C. The Reid vapour pressure
differs from the true vapour pressure of the sample owing to slight vaporization of the sample and the pressure of water vapour
and air in the confined space.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
SIST
SIST EN ISO 3675:1999(Main)
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
EN ISO 3675:1998

Migrated from Progress Sheet (TC Comment) (2000-07-10): Revision of EN ISO 3675:1995

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12185:1998(Main)
Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
EN ISO 12185:1996

Gives a method for the determination, using an oscillation U-tube densitometer, of the density of crude petroleum and related products within the range 600 kg/m^3 to 1 100 kg/m^3 which can be handled as single-phase liquids at the test temperature and pressure.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 12185:2023(Main)
Crude petroleum, petroleum products and related products - Determination of density - Laboratory density meter with an oscillating U tube sensor (ISO/DIS 12185:2022)
prEN ISO 12185
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day