Plastics - Epoxy resins - Part 1: Designation (ISO 3673-1:1996)

Contains a method of designation for epoxy resins. The objective of this method is to allocate to each commercial product a group of digits, giving in a coded form certain information on the product such as chemical base, main properties and the nature of modifiers, solvents or additives. Replaces the first edition.

Kunststoffe - Epoxidharze - Teil 1: Einstufung (ISO 3673-1:1996)

Dieser Teil von ISO 3673 beschreibt ein Verfahren zur Einstufung von Epoxid- harzen. Ziel dieser Einstufungsmethode is es, jedem Handelsprodukt eine Gruppe von Zeichen zuzuordnen, genannt "Einstufung". Sie gibt in codierter Form gewisse Information zum Produkt: chemischer Aufbau, angena(herte Angaben zu den Haupteigenschaften und Art der Modifizierungsmittel, Lo(semittel oder Additive.

Plastiques - Résines époxydes - Partie 1: Désignation (ISO 3673-1:1996)

La présente partie de l'ISO 3673 prescrit une méthode pour la désignation des résines époxydes.Le but de cette méthode de désignation est d'affecter, à chaque produit commercialisé, un groupe de chiffres, appelé «désignation » et représentant, d'une manière codée, un certain nombre de renseignements sur ce produit: la base chimique, les valeurs approximatives des principales caractéristiques et la nature des agents modifiants, solvants ou additifs.Ainsi, tous les produits ayant des caractéristiques voisines, et donc susceptibles d'avoir les même utilisations, auront la même désignation, ce qui peut aider les utilisateurs dans leur choix si les fabricants prennent soin d'indiquer la désignation dans leurs notices commerciales.

Polimerni materiali - Epoksidne smole - 1. del: Označevanje (ISO 3673-1:1996)

General Information

Status
Published
Publication Date
30-Apr-2000
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2000
Due Date
01-May-2000
Completion Date
01-May-2000

Buy Standard

Standard
EN ISO 3673-1:2000
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3673-1:2000
01-maj-2000
3ROLPHUQLPDWHULDOL(SRNVLGQHVPROHGHO2]QDþHYDQMH ,62
Plastics - Epoxy resins - Part 1: Designation (ISO 3673-1:1996)
Kunststoffe - Epoxidharze - Teil 1: Einstufung (ISO 3673-1:1996)
Plastiques - Résines époxydes - Partie 1: Désignation (ISO 3673-1:1996)
Ta slovenski standard je istoveten z: EN ISO 3673-1:1999
ICS:
83.080.10 Duromeri Thermosetting materials
SIST EN ISO 3673-1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3673-1:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 3673-1:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 3673-1:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 3673-1:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 3673-1:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 3673-1:2000
IS0
INTERNATIONAL
STANDARD 3673-l
Second edition
1996-l 2-15
Plastics - Epoxy resins -
Part 1:
Designation
Plastiques - Rhsines gpoxydes -
Parlie I: Dksigna tion
Reference number
IS0 3673-l :1996(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 3673-1:2000
IS0 3673-l : 1996(E)
Foreword
IS0 (the international Organization for Standardization) is a worldwide federation of national standards bodies (IS0
member bodies). The work of preparing International Standards is normally carried out through IS0 technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard IS0 3673-l was prepared by Technical Committee lSO/TC 61, Plas~;cs, Subcommittee 12,
Thermosetting materials.
This second edition cancels and replaces the first edition (IS0 3673~1:1980), of which it constitutes a minor
(editiorial) revision.
IS0 3673 consists of the following parts, under the general title Plastics - Epoxy resins:
- Par?? Designation
- Par? 2: Preparation of test specimens and determination of properties
0 IS0 1996
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-1211 Geneve 20 l Switzerland
Internet central @ isocs.iso.ch
x.400 c=ch; a=40Onet; p=iso; o=isocs; s=central
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 3673-1:2000
INTERNATIONAL STANDARD @ IS0 IS0 3673-l : 1996(E)
Plastics - Epoxy resins - Part 1: Designation
1 Scope
This part of IS0 3673 specifies a method of designation for epoxy resins.
The objective of this designation method is to allocate to each commercial product a group of digits, called the
“designation”, giving in a coded form certain information on the product: chemical base, approximate values of main
properties and the nature of modifiers, solvents or additives.
Thus, all products having similar characteristics and therefore likely to have the same uses will have the same
designation, so aiding users in their choice, provided that manufacturers quote the designation in their data sheets.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of
IS0 3673. At the time of publication, the editions indicated were valid. All standards are subject to revision, and
parties to agreements based on this part of IS0 3673 are encouraged to investigate the possibility of applying the
most recent editions of the standards indicated below. Members of IEC and IS0 maintain registers of currently valid
International Standards.
IS0 1183: 1987, Plastics - Method for determining the density and relative density of non-cellular plastics.
IS0 1675: 1985, Plastics - Liquid resins - Determination of density by the pyknometer method.
IS0 3001 :--I), Plastics - Epoxy compounds - Determination of epoxy equivalent.
IS0 3219: 1993, Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of
viscosity using a rotational viscometer with defined shear rate.
3 Designation system
Epoxy resins shall be designated by the symbol “EP” for epoxide, followed by a group of five digits (corres
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.