SIST EN ISO 4895:2014
(Main)Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)
This International Standard specifies a method for determining the tendency of liquid epoxy resins to crystallize. The tendency to crystallize is determined by observing, at specified time intervals, changes in fluidity and the onset of crystallization.
Kunststoffe - Flüssige Epoxidharze - Bestimmung der Kristallisationsneigung (ISO 4895:2014)
Diese Internationale Norm legt ein Verfahren zur Bestimmung der Kristallisationsneigung flüssiger Epoxidharze fest. Die Kristallisationsneigung wird bestimmt, indem Änderungen in der Fluidität und der Beginn der Kristallisation in bestimmten Zeitintervallen beobachtet werden.
Plastiques - Résines époxydes liquides - Détermination de la tendance à la cristallisation (ISO 4895:2014)
L'ISO 4895:2014 spécifie une méthode de détermination de la tendance à la cristallisation des résines époxy liquides. Cette tendance à cristalliser se détermine par observation, à intervalles de temps donnés, des variations de la fluidité et d'apparition de la cristallisation.
Polimerni materiali - Tekoče epoksidne smole - Ugotavljanje nagnjenosti h kristalizaciji (ISO 4895:2014)
Ta mednarodni standard določa postopek ugotavljanja nagnjenosti tekočih epoksidnih smol h kristalizaciji. Nagnjenost h kristalizaciji se določi z opazovanjem sprememb v fluidnosti in opazovanjem nastanka kristalizacije v določenih časovnih intervalih.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4895:2014
01-oktober-2014
1DGRPHãþD
SIST EN ISO 4895:2000
3ROLPHUQLPDWHULDOL7HNRþHHSRNVLGQHVPROH8JRWDYOMDQMHQDJQMHQRVWLK
NULVWDOL]DFLML ,62
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)
Kunststoffe - Flüssige Epoxidharze - Bestimmung der Kristallisationsneigung (ISO
4895:2014)
Plastiques - Résines époxydes liquides - Détermination de la tendance à la cristallisation
(ISO 4895:2014)
Ta slovenski standard je istoveten z: EN ISO 4895:2014
ICS:
83.080.10 Duromeri Thermosetting materials
SIST EN ISO 4895:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4895:2014
---------------------- Page: 2 ----------------------
SIST EN ISO 4895:2014
EUROPEAN STANDARD
EN ISO 4895
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 83.080.10 Supersedes EN ISO 4895:1999
English Version
Plastics - Liquid epoxy resins - Determination of tendency to
crystallize (ISO 4895:2014)
Plastiques - Résines époxydes liquides - Détermination de Kunststoffe - Flüssige Epoxidharze - Bestimmung der
la tendance à la cristallisation (ISO 4895:2014) Kristallisationsneigung (ISO 4895:2014)
This European Standard was approved by CEN on 28 June 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4895:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4895:2014
EN ISO 4895:2014 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4895:2014
EN ISO 4895:2014 (E)
Foreword
This document (EN ISO 4895:2014) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at
the latest by January 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4895:1999.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 4895:2014 has been approved by CEN as EN ISO 4895:2014 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 4895:2014
---------------------- Page: 6 ----------------------
SIST EN ISO 4895:2014
INTERNATIONAL ISO
STANDARD 4895
Third edition
2014-07-15
Plastics — Liquid epoxy resins
— Determination of tendency to
crystallize
Plastiques — Résines époxydes liquides — Détermination de la
tendance à la cristallisation
Reference number
ISO 4895:2014(E)
©
ISO 2014
---------------------- Page: 7 ----------------------
SIST EN ISO 4895:2014
ISO 4895:2014(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 4895:2014
ISO 4895:2014(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Reagents . 1
5 Apparatus . 1
6 Procedure. 2
7 Expression of results . 3
8 Precision . 3
9 Test report .
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoffe - Flüssige Epoxidharze - Bestimmung der Kristallisationsneigung (ISO/FDIS 4895:2014)Plastiques - Résines époxydes liquides - Détermination de la tendance à la cristallisation (ISO/FDIS 4895:2014)Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO/FDIS 4895:2014)83.080.10DuromeriThermosetting materialsICS:Ta slovenski standard je istoveten z:FprEN ISO 4895kSIST FprEN ISO 4895:2014en,fr,de01-maj-2014kSIST FprEN ISO 4895:2014SLOVENSKI
STANDARD
kSIST FprEN ISO 4895:2014
© ISO 2014Plastics — Liquid epoxy resins — Determination of tendency to crystallizePlastiques — Résines époxydes liquides — Détermination de la tendance à la cristallisationINTERNATIONAL STANDARDPlease see the administrative notes on page iiiReference numberISO/FDIS 4895:2014(E)ISO/FDIS4895ISO/TC 61/SC 12Secretariat: JISCVoting begins on: 2014-0Voting terminates on: 2014-0RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE AND TO PROVIDE SUPPOR TING DOCUMENTATION.IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.FINALDRAFTkSIST FprEN ISO 4895:2014
ISO/FDIS 4895:2014(E) ii © ISO 2014 – All rights reservedCOPYRIGHT PROTECTED DOCUMENT©
ISO 2014All rights reservedä Unless otherwise speci Ðiedá no part of this publication may be reproduced or utilized otherwise in any form or by any meansá electronic or mechanicalá including photocopyingá or posting on the internet or an intranetá without prior written permissionä Permission can be requested from either ISO at the address below or ISOïs member body in the country of the requester.ISO copyright of ÐiceTel. + 41 22 749 01 11Fax + 41 22 749 09 47Eæmail copyright 7isoäorgWeb www.iso.orgPublished in SwitzerlandkSIST FprEN ISO 4895:2014
ISO/CEN PARALLEL PROCESSINGcessed under the ISO-lead mode of collaboration as de Ðined in the Vienna Agreementä The
Ðinal draft was established on the basis of comments received during a parallel enquiry on the draftäThis
Ðinal draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel twomonth approval vote in ISO and formal vote in CEN.Positive votes shall not be accompanied by comments.Negative votes shall be accompanied by the relevant technical reasons.ISO/FDIS 4895:2014(E) © ISO 2014 – All rights reserved iiikSIST FprEN ISO 4895:2014
ISO/FDIS 4895:2014(E) iv © ISO 2014 – All rights reservedContents PageForeword .vIntroduction .vi1 Scope .12 Normative references .13 Principle .14 Reagents .15 Apparatus .16 Procedure.27 Expression of results .38 Precision .39 Test report .3kSIST FprEN ISO 4895:2014
ISO/FDIS 4895:2014(E)Forewordthrough ISO technical committeesä Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizationsá governmental and nonægovernmentalá in liaison with ISOá also take part in the workä electrotechnical standardizationäThe procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.