SIST EN ISO 3673-2:2012
(Main)Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
This part of ISO 3673 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of crosslinked epoxy resins. The properties determined have been selected from the general test methods in ISO 10350-1:2007. Test methods for the determination of the properties of non-crosslinked epoxy resins are not included in this part of ISO 3673.
Kunststoffe - Epoxidharze - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften von vernetzten Epoxidharzen (ISO 3673-2:2012)
Dieser Teil von ISO 3673 legt die Verfahren für die Herstellung von Probekörpern und die zur Bestimmung der Eigenschaften von vernetzten Epoxidharzen anzuwendenden Prüfverfahren fest.
Die Verfahren zur Bestimmung der Eigenschaften von vernetzten Epoxidharzen wurden aus den allgemeinen Prüfverfahren in ISO 10350 1:2007 ausgewählt.
Die Bestimmung der Eigenschaften von unvernetzten Epoxidharzen ist nicht Gegenstand dieses Teiles von ISO 3673 (siehe ANMERKUNG 1).
ANMERKUNG 1 Die Verfahren zur Bestimmung der Eigenschaften von unvernetzten Epoxidharzen sind in ISO 18280 festgelegt.
ANMERKUNG Um reproduzierbare und vergleichbare Prüfergebnisse zu erhalten, ist es notwendig, die hierin festgelegten Verfahren für die Prüfung, Probenherstellung und -konditionierung sowie die festgelegten Probekörpermaße anzuwenden. Ermittelte Werte stimmen nicht unbedingt mit Ergebnissen überein, die mit Probekörpern erhalten werden, die andere Maßen haben oder nach anderen Verfahren hergestellt wurden. Bezüglich der Bestimmung von Eigenschaften und der Herstellung von Probekörpern für Produkte auf Epoxidbasis gibt es weitere Normen, auf die erforderlichenfalls verwiesen wird.
Plastiques - Résines époxydes - Partie 2: Préparation des éprouvettes et détermination des propriétés des résines époxydes réticulées (ISO 3673-2:2012)
L'ISO 3673-2:2012 spécifie les méthodes de préparation des éprouvettes et les méthodes d'essai à appliquer pour déterminer les propriétés des résines époxydes réticulées. Les propriétés déterminées ont été choisies parmi les méthodes d'essai générales de l'ISO 10350-1:2007.
Les méthodes d'essai utilisées pour déterminer les propriétés des résines époxydes non réticulées ne sont pas comprises dans l'ISO 3673-2:2012.
Les méthodes d'essai relatives aux résines époxydes non réticulées sont spécifiées dans l'ISO 18280.
Polimerni materiali - Epoksidne smole - 2. del: Priprava preskušancev in ugotavljanje lastnosti epoksidnih smol z mrežasto strukturo (ISO 3673-2:2012)
Ta del standarda ISO 3673 določa metode za pripravo preskušancev in preskusne metode, ki jih je treba uporabiti pri ugotavljanju lastnosti epoksidnih smol z mrežasto strukturo. Ugotovljene lastnosti so bile izbrane na podlagi splošnih preskusnih metod iz standarda ISO 10350-1:2007. Preskusne metode za ugotavljanje lastnosti epoksidnih smol brez mrežaste strukture niso vključene v ta del standarda ISO 3673.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3673-2:2012
01-oktober-2012
1DGRPHãþD
SIST EN ISO 3673-2:2000
Polimerni materiali - Epoksidne smole - 2. del: Priprava preskušancev in
ugotavljanje lastnosti epoksidnih smol z mrežasto strukturo (ISO 3673-2:2012)
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of
properties of crosslinked epoxy resins (ISO 3673-2:2012)
Kunststoffe - Epoxidharze - Teil 2: Herstellung von Probekörpern und Bestimmung von
Eigenschaften von vernetzten Epoxidharzen (ISO 3673-2:2012)
Plastiques - Résines époxydes - Partie 2: Préparation des éprouvettes et détermination
des propriétés des résines époxydes réticulées (ISO 3673-2:2012)
Ta slovenski standard je istoveten z: EN ISO 3673-2:2012
ICS:
83.080.10 Duromeri Thermosetting materials
SIST EN ISO 3673-2:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3673-2:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 3673-2:2012
EUROPEAN STANDARD
EN ISO 3673-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2012
ICS 83.080.10 Supersedes EN ISO 3673-2:1999
English Version
Plastics - Epoxy resins - Part 2: Preparation of test specimens
and determination of properties of crosslinked epoxy resins (ISO
3673-2:2012)
Plastiques - Résines époxydes - Partie 2: Préparation des Kunststoffe - Epoxidharze - Teil 2: Herstellung von
éprouvettes et détermination des propriétés des résines Probekörpern und Bestimmung von Eigenschaften von
époxydes réticulées (ISO 3673-2:2012) vernetzten Epoxidharzen (ISO 3673-2:2012)
This European Standard was approved by CEN on 14 July 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3673-2:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3673-2:2012
EN ISO 3673-2:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 3673-2:2012
EN ISO 3673-2:2012 (E)
Foreword
This document (EN ISO 3673-2:2012) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics”, the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at
the latest by January 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3673-2:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3673-2:2012 has been approved by CEN as a EN ISO 3673-2:2012 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 3673-2:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 3673-2:2012
INTERNATIONAL ISO
STANDARD 3673-2
Third edition
2012-07-15
Plastics — Epoxy resins —
Part 2:
Preparation of test specimens
and determination of properties of
crosslinked epoxy resins
Plastiques — Résines époxydes —
Partie 2: Préparation des éprouvettes et détermination des propriétés
des résines époxydes réticulées
Reference number
ISO 3673-2:2012(E)
©
ISO 2012
---------------------- Page: 7 ----------------------
SIST EN ISO 3673-2:2012
ISO 3673-2:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 3673-2:2012
ISO 3673-2:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Preparation of test specimens . 2
3.1 General . 2
3.2 Pretreatment of materials . 2
3.3 Preparation of test sheets . 2
3.4 Cutting out test specimens . 4
3.5 Conditioning test specimens . 4
4 Determination of properties . 4
Bibliography . 6
© ISO 2012 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 3673-2:2012
ISO 3673-2:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 3673-2 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 12,
Thermosetting materials.
This third edition cancels and replaces the second edition (ISO 3673-2:2007), which has been revised to make
it clear that it applies only to crosslinked epoxy resins.
ISO 3673 consists of the following parts, under the general title Plastics — Epoxy resins:
— Part 1: Designation
— Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
iv © ISO 2012 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 3673-2:2012
INTERNATIONAL STANDARD ISO 3673-2:2012(E)
Plastics — Epoxy resins —
Part 2:
Preparation of test specimens and determination of properties
of crosslinked epoxy resins
SAFETY STATEMENT — Persons using this document should be familiar with normal laboratory
practice, if applicable. This document does not purport to address all of the safety concerns, if any,
associated with its use. It is the responsibility of the user to establish appropriate safety and health
practices and to ensure compliance with any regulatory requirements.
1 Scope
This part of ISO 3673 specifies the methods of preparation of test specimens and the test methods to be used
in determining the properties of crosslinked epoxy resins. The properties determined have been selected from
the general test methods in ISO 10350-1:2007.
Test methods for the determination of the properties of non-crosslinked epoxy resins are not included in this
part of ISO 3673.
NOTE Test methods for non-crosslinked epoxy resins are specified in ISO 18280.
In order to obtain reproducible and comparable test results, it is necessary to use the test methods, sample
preparation and conditioning, and specimen dimensions specified herein. Values determined will not
necessarily be identical to those obtained using test specimens of different dimensions or prepared using
diff
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.