SIST EN 61753-1-1:2002

Fibre optic interconnecting devices and passive components performance standard -- Part 1-1: General and guidance - Interconnecting devices (connectors)

Covers general information on fibre optic connector performance standards. Includes references, definitions and rules for creating a performance standard, as well as additional information pertinent to the subject.

Fibre optic interconnecting devices and passive components - Part 1-1: General and guidance - Interconnection devices (connectors) (IEC 61753-1-1:2000)

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2002
• Withdrawal Date: 17-Jan-2008
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 19-Dec-2007
• Due Date: 11-Jan-2008
• Completion Date: 18-Jan-2008
• Ref Project: EN 61753-1-1:2001 - Fibre optic interconnecting devices and passive components performance standard - Part 1-1: General and guidance - Interconnecting devices (connectors)

Relations

• Revised: SIST EN 61753-1:2010 - Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards (IEC 61753-1:2007)
• Effective Date: 05-Oct-2010
• Replaced By: SIST EN 61753-1:2010 - Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards (IEC 61753-1:2007)
• Effective Date: 29-Jan-2023
• Replaced By: SIST EN 61753-1:2010 - Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards (IEC 61753-1:2007)
• Effective Date: 01-Sep-2010

Standards Content (Sample)

SLOVENSKI SIST EN 61753-1-1:2002
prva izdaja
STANDARD
september 2002
Fibre optic interconnecting devices and passive components - Part 1-1: General
and guidance - Interconnection devices (connectors) (IEC 61753-1-1:2000)
ICS 33.180.20 Referenčna številka
SIST EN 61753-1-1:2002(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61753-1-1
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2001
ICS 33.180.20
English version
Fibre optic interconnecting devices and
passive components performance standard
Part 1-1: General and guidance -
Interconnecting devices (connectors)
(IEC 61753-1-1:2000)
Norme de qualité de fonctionnement des Lichtwellenleiter - Verbindungselemente
dispositifs d'interconnexion et composants und passive Bauteile - Betriebsverhalten
passifs à fibres optiques Teil 1-1: Allgemeines und Leitfaden -
Partie 1-1: Généralités et guide - Verbindungselemente (Steckverbinder)
Dispositifs d'interconnexion (connecteurs) (IEC 61753-1-1:2000)
(CEI 61753-1-1:2000)
This European Standard was approved by CENELEC on 2000-12-01. CENELEC members are bound
to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotec
...