kSIST FprEN ISO 25649-5:2024

Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO/FDIS 25649-5:2024)

This document specifies additional specific safety requirements and test methods for Class C floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class C floating leisure articles as specified in ISO 25649-1:2024, Table 1.
NOTE 1        Typical products forming Class C (see Annex B):
—      tube riders towable with interior holding facility and closed cockpit;
—      raft riders towable;
—      board riders towable;
—      banana type towable.
NOTE 2        Typical places for application:
—      distant from bathing areas and other frequented water surfaces, wide empty spaces, dedicated racetracks (parcours);
—      no to little waves;
—      no strong currents.

Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 5: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Artikel der Klasse C (ISO/FDIS 25649-5:2024)

Dieses Dokument gilt für schwimmende Freizeitartikel für den Gebrauch auf und im Wasser der Klasse C nach ISO 25649-1:20xx, unabhängig davon, ob der Auftrieb durch Aufblasen oder selbstschwimmende Materialien erzielt wird.
Dieses Dokument gilt im Zusammenhang mit ISO 25649-1:20xx und ISO 25649-2:20xx.
ANMERKUNG 1 Typische Produkte der Klasse C (siehe Anhang B):
- ring-/reifenartiger Gleiter (en: tube riders) als Nachschleppgerät mit Halteeinrichtung im Innenraum und abgeschlossenem Cockpit;
- Floß als Nachschleppgerät;
- Brettgleiter als Nachschleppgerät;
- bananenförmiger Gleiter als Nachschleppgerät.
ANMERKUNG 2 Typische Orte der Verwendung:
- entfernt von Badebereichen und anderen genutzten Wasserflächen, weite leere Flächen, welche als Fahrstrecken (Parcours) vorgesehen sind;
- keine bis sehr geringe Wellenhöhe;
- keine starken Strömungen.

Articles de loisirs flottants à utiliser sur ou dans l'eau - Partie 5: Exigences de sécurité et méthodes d'essai complémentaires propres aux dispositifs de Classe C (ISO/FDIS 25649-5:2024)

Le présent document spécifie des méthodes d’essai et des exigences de sécurité spécifiques supplémentaires pour les articles de loisirs flottants à utiliser sur ou dans l’eau de Classe C, que la flottabilité soit obtenue par gonflage ou par un matériau ayant une flottabilité propre.
Le présent document s’applique aux articles de loisirs flottants de Classe C spécifiés dans l’ISO 25649-1:2024, Tableau 1.
NOTE 1        Produits types constituant la Classe C (voir l’Annexe B) :
—      tubes tractables munis d’un dispositif intérieur de retenue et d’un habitacle fermé ;
—      radeaux tractables ;
—      planches tractables ;
—      bananes tractables.
NOTE 2        Lieux d’utilisation types :
—      à distance des zones de baignade et autres plans d’eau fréquentés, grands espaces vides, circuits dédiés (parcours) ;
—      absence de vagues ou petites vagues ;
—      pas de courants forts.

Plavajoči pripomočki za prosti čas, ki se uporabljajo na vodi in v njej - 5. del: Dodatne posebne varnostne zahteve in preskusne metode za pripomočke razreda C (ISO/FDIS 25649-5:2024)

General Information

• Status: Not Published
• Public Enquiry End Date: 19-Dec-2021
• ICS: 97.220.40 - Outdoor and water sports equipment
• Technical Committee: SPO - Sports
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 29-Aug-2024
• Due Date: 17-Oct-2024
• Directive: 2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
• Mandate: M/372 - Standardisation mandate to CEN relating to floating leisure products for use on or in the water
• Ref Project: FprEN ISO 25649-5 - Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO/FDIS 25649-5:2024)

Relations

• Revised: SIST EN ISO 25649-5:2017 - Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO 25649-5:2017)
• Effective Date: 19-Jan-2023
• Revised: SIST EN ISO 25649-5:2017 - Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO 25649-5:2017)
• Effective Date: 18-Jan-2023
• Revised: SIST EN ISO 25649-5:2017 - Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO 25649-5:2017)
• Effective Date: 16-Oct-2019

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 25649-5:2021
01-december-2021
Plavajoči pripomočki za prosti čas, ki se uporabljajo na vodi in v njej - 5. del:
Dodatne posebne varnostne zahteve in preskusne metode za pripomočke razreda
C (ISO/DIS 25649-5:2021)
Floating leisure articles for use on and in the water - Part 5: Additional specific safety
requirements and test methods for Class C devices (ISO/DIS 25649-5:2021)
Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 5: Zusätzliche
besondere sicherheitstechnische Anforderungen und Prüfverfahren für Artikel der Klasse
C (ISO/DIS 25649-5:2021)
Articles de loisirs flottants à utiliser sur ou dans l'eau - Partie 5: Exigences de sécurité et
méthodes d'essai complémentaires propres aux dispositifs de Classe C (ISO/DIS 25649-
5:2021)
Ta slovenski standard je istoveten z: prEN ISO 25649-5
ICS:
97.220.40 Oprema za športe na Outdoor and water sports
prostem in vodne športe equipment
oSIST prEN ISO 25649-5:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 25649-5:2021
oSIST prEN ISO 25649-5:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 25649-5
ISO/TC 83 Secretariat: DIN
Voting begins on: Voting terminates on:
2021-10-01 2021-12-24
Floating leisure articles for use on and in the water —
Part 5:
Additional specific safety requirements and test methods
for Class C devices
Articles de loisirs flottants à utiliser sur ou dans l'eau —
Partie 5: Exigences de sécurité et méthodes d'essai complémentaires propres aux dispositifs de Classe C
ICS: 97.220.40
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 25649-5:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021

oSIST prEN ISO 25649-5:2021
ISO/DIS 25649-5:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

oSIST prEN ISO 25649-5:2021
ISO/DIS 25649-5:2021(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Safety requirements and test methods . 3
4.1 General . 3
4.2 Test conditions . 3
4.3 Design . 3
4.3.1 General. 3
4.3.2 Sizing, admissible number of users and maximum load capacity . 4
4.3.3 C1 devices, space per person (passive user, including children) . 4
4.3.4 C2 and C3 devices, space per person . 4
4.3.5 Grab handles . 5
4.3.6 Buoyancy and load capacity . 6
4.3.7 Residual buoyancy . 6
4.3.8 Foot, leg and torso entrapment . 6
4.3.9 Valves and other protruding parts . 7
4.3.10 Accessible protruding parts, entanglement . 7
4.3.11 Strength of towing device attachment . 7
4.3.12 Towing system . 7
4.3.13 Colour of towing rope . 8
4.3.14 Floatability of towing rope . 8
4.3.15 Fittings . 8
4.3.16 Elasticity of towing rope . 8
4.4 In-water performance . 8
4.4.1 General. 8
4.4.2 Selection of test subjects . 9
4.4.3 Assessment panel . 9
4.4.4 Selection of watercraft and towing personnel for testing . 9
4.4.5 Test conditions, test course, duration of test, test speed, wind speed. 9
4.4.6 Manoeuvres .10
4.4.7 Efficiency of drainage system for inflatable chambers designed with an
external cover .10
4.4.8 Entrapment, entanglement, additional practical in-water test during capsizing .10
4.4.9 Capsizing device, practical in-water test .10
4.4.10 Residual buoyancy, additional practical in-water test .10
4.4.11 Pass/fail criteria .11
5 Required capabilities of the test persons being towed.11
6 Consumer information .11
6.1 General .11
6.2 Intended use .12
6.3 Responsibilities .12
6.3.1 General.12
6.3.2 Watercraft driver .12
6.3.3 Observer .12
6.3.4 Rider .12
7 Written warnings in the manual .13
7.1 General .13
7.2 Warnings .13
7.3 Instructions .14
oSIST prEN ISO 25649-5:2021
ISO/DIS 25649-5:2021(E)
8 Signals .15
8.1 General .15
8.2 Hand signals .15
8.3 Signal devices .17
9 Exclusions .18
Annex A (normative) Quick release system .19
Annex B (informative) Examples of typical products forming Class .20
Annex ZA (informative) Examples Relationship between this European Standard and the
safety requirements of Directive 2001/95/EC aimed to be covered .22
Bibliography .24
iv © ISO 2021 – All rights reserved

oSIST prEN ISO 25649-5:2021
ISO/DIS 25649-5:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carr
...