SIST EN 2591-421:2004

Aerospace series - Elements of electrical and optical connection - Test methods - Part 421: Free fall

This standard specifies a method of verifying the ability of an element of connection to withstand shock when submitted to repeated falls.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 421: Freier Fall

Diese Norm legt ein Verfahren zur Überprüfung der Widerstandsfähigkeit eines Verbindungselementes gegenüber Stößen fest, die durch wiederholtes Herunterfallen verursacht werden.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 421: Chute libre

Aerospace series - Elements of electrical and optical connection - Test methods - Part 421: Free fall

General Information

• Status: Published
• Publication Date: 30-Apr-2004
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I08 - Imaginarni 08
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-2004
• Due Date: 01-May-2004
• Completion Date: 01-May-2004
• Ref Project: EN 2591-421:2002 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 421: Free fall

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 421: Free fallLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 421: Freier FallSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 421: Chute libreAerospace series - Elements of electrical and optical connection - Test methods - Part 421: Free fall49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-421:2002SIST EN 2591-421:2004en01-maj-2004SIST EN 2591-421:2004SLOVENSKI
STANDARD



SIST EN 2591-421:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-421June 2002ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 421: Free fallSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 421: Chute libreLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 421: Freier FallThis European Standard was approved by CEN on 8 February 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-421:2002 ESIST EN 2591-421:2004



EN 2591-421:2002 (E)2ForewordThis document (EN 2591-421:2002) has been prepared by the European Association of AerospaceManufacturers (AECMA).After enquiries and votes carried out in accordance with the rules of this Association, this Standard h
...