SIST EN 50516-1-1:2012/AC:2012

Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC/PAS 61753-1-3

This European Standard contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements that an SC-RJ connector set with one side protected by an industrial housing with the fibres terminated with cylindrical zirconia PC ferrules, an adaptor fitted with resilient alignment sleeves and
patchcord shall meet in order for it to be categorised as an EN standard product. The product is rated IP67. Since different variants are permitted, product marking details are given in 3.6.

Industrie-Steckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-Steuerungs- und Datenübertragungssysteme - Produktnormen - Teil 1-1: Industriesteckverbinder der Bauart SC-RJ-PC zum Anschluss an Mehrmodenfasern der Typen A1a und A1b nach EN 60793-2-10 für die Kategorie I (Industrieumgebung) nach den Festlegungen in IEC/PAS 61753-1-3

Jeux de connecteurs industriels et composants d’interconnexion à utiliser dans les systèmes de communication et de commande par fibres optiques - Spécifications de produit - Partie 1 1: Type SC RJ PC industriel câblés sur fibre multimodale des catégories A1a et A1b de la norme EN 60793-2-10 pour satisfaire aux exigences de la catégorie I (environnements industriels) comme cela est spécifié dans la CEI/PAS 61753-1-3

Sestavi industrijskih konektorjev in povezovalnih komponent za uporabo v krmilnih in komunikacijskih sistemih z optičnimi kabli - Specifikacije izdelka - 1-1. del: Industrijski tip SC-RJ PC, zaključen z večrodnim optičnim vlaknom kategorij A1a in A1b po EN 60793-2-10, ki ustreza zahtevam kategorije I (industrijska okolja), kot je specificirana v IEC/PAS 61753-1-3

Ta evropski standard vsebuje začetne zahteve za dimenzije, optične in mehanske zahteve ter zahteve za okoljsko učinkovitost, ki jim mora ustrezati konektorski sestav SC-RJ, na eni strani zaščiten z industrijskim ohišjem, z vlakni, zaključenimi z valjasto cirkonijevo tulko PC, adapter s prožnimi obojkami in priključni kabel, da bi bili opredeljeni kot izdelek standarda EN. Proizvod je ocenjen kot IP67. Ker so dovoljene različice, so podrobnosti o označevanju izdelka navedene v 3.6.

General Information

• Status: Withdrawn
• Publication Date: 24-Sep-2012
• Withdrawal Date: 30-Dec-2012
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 11-Dec-2012
• Due Date: 03-Jan-2013
• Completion Date: 31-Dec-2012
• Ref Project: EN 50516-1-1:2011/AC:2012 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC/PAS 61753-1-3

Relations

• Corrects: SIST EN 50516-1-1:2012 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC/PAS 61753-X-Y
• Effective Date: 01-Oct-2012
• Revised: SIST EN 50516-1-1:2012/AC:2013 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications -- Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC/PAS 61753-1-3
• Effective Date: 06-May-2014
• Replaced By: SIST EN 50516-1-1:2012/AC:2013 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications -- Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC/PAS 61753-1-3
• Effective Date: 07-Jun-2022
• Replaced By: SIST EN 50516-1-1:2012/AC:2013 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications -- Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC/PAS 61753-1-3
• Effective Date: 01-Feb-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industrie-Steckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-Steuerungs- und Datenübertragungssysteme - Produktnormen - Teil 1-1: Industriesteckverbinder der Bauart SC-RJ-PC zum Anschluss an Mehrmodenfasern der Typen A1a und A1b nach EN 60793-2-10 für die Kategorie I (Industrieumgebung) nach den Festlegungen in IEC/PAS 61753-1-3Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC/PAS 61753-1-301-oktober-2012SIST EN 50516-1-1:2012/AC:2012SLOVENSKI
STANDARD



2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Jeux de connecteurs industriels et composants d’interconnexion à utiliser dan
...