Fixed capacitors for use in electronic equipment -- Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only

Together with EN 60384-14-3 supersedes EN 132421:1997

Festkondensatoren zur Verwendung in Geräten der Elektronik -- Teil 14-2: Vordruck für Bauartspezifikation - Kondensatoren zur Unterdrückung elektromagnetischer Störungen, geeignet für Netzbetrieb - Nur Sicherheitsprüfungen

Condensateurs fixes utilisés dans les équipements électroniques -- Partie 14-2: Spécification particulière cadre - Condensateurs fixes d'antiparasitage et raccordement à l'alimentation - Essais de sécurité seulement

forms the basis for a uniform procedure for a common International Safety Mark. It implements the approval schedule for safety tests in EN 60384 14, requires a declaration of design for parameters relevant to safety and prescribes conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design.

Nespremenljivi kondenzatorji za uporabo v elektronski opremi – 14-2. del: Okvirna podrobna specifikacija – Pritrjeni kondenzatorji za dušenje elektromagnetnega motenja in priključevanje na omrežno napajanje – Samo varnostno preskušanje (IEC 60384-14-2:2004)

General Information

Status
Withdrawn
Publication Date
30-Nov-2005
Withdrawal Date
01-Jul-2019
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
02-Jul-2019
Due Date
25-Jul-2019
Completion Date
02-Jul-2019

RELATIONS

Buy Standard

Standard
SIST EN 60384-14-2:2005
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI SIST EN 60384-14-2:2005
STANDARD
december 2005
Nespremenljivi kondenzatorji za uporabo v elektronski opremi – 14-2. del:
Okvirna podrobna specifikacija – Pritrjeni kondenzatorji za dušenje
elektromagnetnega motenja in priključevanje na omrežno napajanje – Samo
varnostno preskušanje (IEC 60384-14-2:2004)
Fixed capacitors for use in electronic equipment – Part 14-2: Blank detail

specification – Fixed capacitors for electromagnetic interference suppression and

connection to the supply mains – Safety tests only (IEC 60384-14-2:2004)
ICS 31.060.10 Referenčna številka
SIST EN 60384-14-2:2005(en)

© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60384-14-2
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2004
ICS 31.060.10 Partially supersedes EN 132421:1997
English version
Fixed capacitors for use in electronic equipment
Part 14-2: Blank detail specification –
Fixed capacitors for electromagnetic interference suppression
and connection to the supply mains –
Safety tests only
(IEC 60384-14-2:2004)
Condensateurs fixes utilisés Festkondensatoren zur Verwendung
dans les équipements électroniques in Geräten der Elektronik

Partie 14-2: Spécification particulière Teil 14-2: Vordruck für Bauartspezifikation –

cadre – Kondensatoren zur Unterdrückung
Condensateurs fixes d'antiparasitage elektromagnetischer Störungen,
et raccordement à l'alimentation – geeignet für Netzbetrieb –
Essais de sécurité seulement Nur Sicherheitsprüfungen
(CEI 60384-14-2:2004) (IEC 60384-14-2:2004)

This European Standard was approved by CENELEC on 2004-11-01. CENELEC members are bound to

comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and

notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech

Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,

Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60384-14-2:2004 E
---------------------- Page: 2 ----------------------
EN 60384-14-2:2004 - 2 -
Foreword

The text of document 40/1463/FDIS, future edition 1 of IEC 60384-14-2, prepared by IEC TC 40,

Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote

and was approved by CENELEC as EN 60384-14-2 on 2004-11-01.

This European Standard, together with EN 60384-14-3:2004, supersedes EN 132421:1997.

This European Standard should be read in conjunction with EN 60384-1:2001.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice

The text of the International Standard IEC 60384-14-2:2004 was approved by CENELEC as a

European Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60384-14-2:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.

NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.
Publication Year Title EN/HD Year
IEC 60384-14 - Fixed capacitors for use in electronic - -
equipment
Part 14: Sectional specification - Fixed
capacitors for electromagnetic
interference suppression and connection
to the supply mains
IEC 60384-14-1 - Part 14-1: Blank detail specification - - -
Fixed capacitors for electromagnetic
interference suppression and connection
to the supply mains - Assessment level D
In preparation.
---------------------- Page: 4 ----------------------
INTERNATIONAL IEC
STANDARD 60384-14-2
First edition
2004-10
Fixed capacitors for use in electronic
equipment –
Part 14-2:
Blank detail specification –
Fixed capacitors for electromagnetic
interference suppression and connection
to the supply mains –
Safety tests only
 IEC 2004  Copyright - all rights reserved

No part of this publication may be reproduced or utilized in any form or by any means, electronic or

mechanical, including photocopying and microfilm, without permission in writing from the publisher.

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland

Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

PRICE CODE
Commission Electrotechnique Internationale L
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
---------------------- Page: 5 ----------------------
– 2 – 60384-14-2  IEC:2004(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 14-2: Blank detail specification –
Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains –
Safety tests only
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any

equipment declared to be in conformity with an IEC Publication.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 60384-14-2 has been prepared by IEC technical committee 40:

Capacitors and resistors for electronic equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
40/1463/FDIS 40/1484/RVD

Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

It should be read in conjunction with IEC 60384-1.
---------------------- Page: 6 ----------------------
60384-14-2  IEC:2004(E) – 3 –

This standard forms Part 14-2 of IEC 60384, which is published under the general title Fixed

capacitors for use in electronic equipment.
Part 14 is composed as follows:

Part 14: Sectional specification – Fixed capacitors for electromagnetic interference

suppression and connection to the supply mains

Part 14-1: Blank detail specification – Fixed capacitors for electromagnetic interference

suppression and connection to the supply mains – Assessment level D

Part 14-2: Blank detail specification – Fixed capacitors for electromagnetic interference

suppression and connection to the supply mains – Safety tests only

Part 14-3: Blank detail specification – Fixed capacitors for electromagnetic interference

suppression and connection to the supply mains – Assessment level DZ

The committee has decided that the contents of this publication will remain unchanged until

the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in

the data related to the specific publication. At this date, the publication will be

• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual version of this standard may be issued at a later date.
---------------------- Page: 7 ----------------------
– 4 – 60384-14-2  IEC:2004(E)
INTRODUCTION
Blank detail specification

This blank detail specification forms the basis for a uniform procedure for a common

International Safety Mark. It implements the approval schedule for safety tests in

IEC 60384-14, requires a declaration of design for parameters relevant to safety and

prescribes conformance tests to be conducted on every lot prior to its release and

requalification tests depending on changes to the declare
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.