SIST EN 61754-24-21:2009
(Main)Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-21: Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06 (IEC 61754-24-21:2009)
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-21: Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06 (IEC 61754-24-21:2009)
This part of IEC 61754 serves as an interface standard and describes an SC-RJ fibre optic connector equipped with a protective housing based on IEC 61076-3-106, variant 06, for upgrading the existing interface defined in IEC 61754-24 to IP65 and IP67 ratings according to IEC 60529, for use in harsh industrial environments.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 24-21: Steckverbinderfamilie der Bauart SC-RJ mit Schutzgehäuse nach IEC 61076-3-106, Ausführung 06 (IEC 61754-24-21:2009)
Dispositifs d’interconnexion et composants passifs à fibres optiques - Interfaces de connecteurs pour fibres optiques - Partie 24-21: Connecteurs de type SC-RJ munis de capots de protection, basés sur la CEI 61076-3-106, variante 06 (CEI 61754-24-21:2009)
La CEI 61754-24-21:2009 est une norme d'interface qui décrit un connecteur à fibres optiques de type SC-RJ équipé d'un boîtier de protection selon la CEI 61076-3-106, variante 06, destiné à améliorer les caractéristiques de l'interface existante définie dans la CEI 61754-24 pour obtenir les degrés de protection IP65 et IP67 définis par la CEI 60529, pour une utilisation dans des environnements industriels sévères.
Optični spojni elementi in pasivne komponente - Vmesniki za optične konektorje - 24-21. del: Vmesniški standard za konektorje SC-RJ z zaščitnimi ohišji po IEC 61076-3-106, različica 06 (IEC 61754-24-21:2009)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 24-21: Steckverbinderfamilie der Bauart SC-RJ mit Schutzgehäuse nach IEC 61076-3-106, Ausführung 06 (IEC 61754-24-21:2009)Dispositifs d’interconnexion et composants passifs à fibres optiques - Interfaces de connecteurs pour fibres optiques - Partie 24-21: Connecteurs de type SC-RJ munis de capots de protection, basés sur la CEI 61076-3-106, variante 06 (CEI 61754-24-21:2009)Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-21: Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06 (IEC 61754-24-21:2009)33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 61754-24-21:2009SIST EN 61754-24-21:2009en01-november-2009SIST EN 61754-24-21:2009SLOVENSKI
STANDARD
SIST EN 61754-24-21:2009
EUROPEAN STANDARD EN 61754-24-21 NORME EUROPÉENNE
EUROPÄISCHE NORM September 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61754-24-21:2009 E
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Fibre optic connector interfaces -
Part 24-21: Type SC-RJ connectors with protective housings
based on IEC 61076-3-106, variant 06 (IEC 61754-24-21:2009)
Dispositifs d’interconnexion et composants passifs à fibres optiques -
Interfaces de connecteurs
pour fibres optiques -
Partie 24-21: Connecteurs de type SC-RJ munis de capots de protection,
basés sur la CEI 61076-3-106, variante 06(CEI 61754-24-21:2009)
Lichtwellenleiter -
Verbindungselemente
und passive Bauteile -
Steckgesichter von Lichtwellenleiter-Steckverbindern -
Teil 24-21: Steckverbinderfamilie
der Bauart SC-RJ mit Schutzgehäuse nach IEC 61076-3-106, Ausführung 06 (IEC 61754-24-21:2009)
This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 61754-24-21:2009
EN 61754-24-21:2009 - 2 -
Foreword The text of document 86B/2837/FDIS, future edition 1 of IEC 61754-24-21, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61754-24-21 on 2009-07-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2010-04-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2012-07-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61754-24-21:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60603-7 NOTE
Harmonized in EN 60603-7 series (not modified). IEC 61754-1 NOTE
Harmonized as EN 61754-1:1997 (not modified). IEC 61755-1 NOTE
Harmonized as EN 61755-1:2006 (not modified). ISO 5456-2 NOTE
Harmonized as EN ISO 5456-2:1999 (not modified). __________
SIST EN 61754-24-21:2009
- 3 - EN 61754-24-21:2009 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60529 -1) Degrees of protection provided
by enclosures (IP Code) EN 60529 + corr. May
19912) 1993
IEC 61076-3-106 -1) Connectors for electronic equipment -
Product requirements -
Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interfaceEN 61076-3-106 20062)
IEC 61753-1 -1) Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards EN 61753-1 20072)
IEC 61754-4 -1) Fibre optic connector interfaces -
Part 4: Type SC connector family EN 61754-4 19972)
IEC 61754-24 -3) Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces -
Part 24: Type SC-RJ connector family EN 61754-24 200X3)
IEC 61755 Series Fibre optic connector optical interfaces
EN 61755 Series
1) Undated reference. 2) Valid edition at date of issue. 3) At draft stage. SIST EN 61754-24-21:2009
SIST EN 61754-24-21:2009
IEC 61754-24-21Edition 1.0 2009-06INTERNATIONAL STANDARD
Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces –
Part 24-21: Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06
INTERNATIONAL ELECTROTECHNICAL COMMISSION KICS 33.180.20 PRICE CODEISBN 2-8318-1046-6
® Registered trademark of the International Electrotechnical Commission ® SIST EN 61754-24-21:2009
– 2 – 61754-24-21 © IEC:2009(E) CONTENTS FOREWORD.3 1 Scope.5 2 Normative references.5 3 Description.5 3.1 General.5 3.2 Functional requirements.6 3.3 Environmental, optical and mechanical requirements.6 4 Interface.6 4.1 Free connector part.6 4.2 Fixed adaptor part.7 4.3 Mounting information for the fixed adaptor.8 Bibliography.10
Figure 1 – Free connector (male).7 Figure 2 – Fixed adaptor.8 Figure 3 – Mounting information of the fixed adaptor.9
Table 1 – Intermateability between plugs, adaptors and receptacles.6 Table 2 – Dimensions of the free connector.7 Table 3 – Dimensions of the fixed adaptor (“female”).8 Table 4 – Dimensions for mounting the fixed adaptor.9
SIST EN 61754-24-21:2009
61754-24-21 © IEC:2009(E) – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
FIBRE OPTIC CONNECTOR INTERFACES –
Part 24-21: Type SC-RJ connectors with protective housings
based on IEC 61076-3-106, variant 06
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote interna-tional co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.