SIST EN 62148-9:2004

Fibre optic active components and devices - Package and interface standards -- Part 9: SFF MU duplex 10-pin transceivers

Provides the physical interface specifications for the SFF MU duplex 10-pin fibre optic transceiver module family. The physical requirements of an optical transceiver that will enable mechanical interchangeability of transceivers complying with this standard both at the printed circuit wiring board and for any panel-mounting requirement are specified.

Aktive Lichtwellenleiterbauelemente und -geräte - Gehäuse- und Schnittstellennormen -- Teil 9: Sende- und Empfangsmodule des Typs SFF MU Duplex mit 10 Anschlüssen

Composants et dispositifs actifs en fibres optiques - Normes de boîtier et d'interface -- Partie 9: Emetteurs-récepteurs SFF MU duplex à 10 broches

Provides the physical interface specifications for the SFF MU duplex 10-pin fibre optic transceiver module family. The physical requirements of an optical transceiver that will enable mechanical interchangeability of transceivers complying with this standard both at the printed circuit wiring board and for any panel-mounting requirement are specified.

Aktivne komponente in naprave optičnih vlaken – Standardi oblike in vmesnika– 9. del: SFF MU dupleks 10 kontaktnih oddajnikov in sprejemnikov(IEC 62148-9:2003)*

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2004
• Withdrawal Date: 06-Jan-2014
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 06-Jan-2014
• Due Date: 29-Jan-2014
• Completion Date: 07-Jan-2014
• Ref Project: EN 62148-9:2003 - Fibre optic active components and devices - Package and interface standards - Part 9: SFF MU duplex 10-pin transceivers

Relations

• Replaced By: SIST EN 62148-2:2011 - Fibre optic active components and devices - Package and interface standards - Part 2: SFF 10-pin transceivers (IEC 62148-2:2010)
• Effective Date: 29-Jan-2023
• Revised: SIST EN 62148-2:2011 - Fibre optic active components and devices - Package and interface standards - Part 2: SFF 10-pin transceivers (IEC 62148-2:2010)
• Effective Date: 14-Jan-2014
• Replaced By: SIST EN 62148-2:2011 - Fibre optic active components and devices - Package and interface standards - Part 2: SFF 10-pin transceivers (IEC 62148-2:2010)
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI SIST EN 62148-9:2004

STANDARD
september 2004
Aktivne komponente in naprave optičnih vlaken – Standardi oblike in
vmesnika– 9. del: SFF MU dupleks 10 kontaktnih oddajnikov in
sprejemnikov(IEC 62148-9:2003)*
Fibre optic active components and devices - Package and interface standards - Part
9: SFF MU duplex 10-pin transceivers (IEC 62148-9:2003)
ICS 33.180.20 Referenčna številka
SIST EN 62148-9:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 62148-9
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2003

ICS 33.180.20


English version


Fibre optic active components and devices –
Package and interface standards
Part 9: SFF MU duplex 10-pin transceivers
(IEC 62148-9:2003)


Composants et dispositifs actifs  Aktive Lichtwellenleiterbauelemente
en fibres optiques – und -geräte –
Normes de boîtier et d'interface Gehäuse- und Schnittstellennormen
Partie 9: Emetteurs-récepteurs Teil 9: Sende- und Empfangsmodule
SFF MU duplex à 10 broches des Typs SFF MU Duplex
(CEI 62148-9:2003) mit 10 Anschlüssen
(IEC 62148-9:2003)



This European Standard was approved by CENELEC on 2003-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 62148-9:2003 E

---------------------- Page: 2 ----------------------

EN 62148-9:2003 - 2 -
Foreword
The text of document 86C/492/FDIS, future edition 1 of IEC 62148-9, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 62148-9 on 2003-03-01.

The following dates were fixed:

– latest date by which the EN has to be implemented
at national level by publication of an identical (dop) 2003-12-01
national standard or by endorsement

– latest date by which the national standards conflicting (dow) 2006-03-01
with the EN have to be withdrawn

Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.

This standard constitutes Part 9 of the EN 62148 series, published under the general title Fibre optic
active components and devices - Package and interface standards. This series consists of Part 1,
devoted to general requirements, and various parts specific to individual module families.

Part 1: General and guidance
Part 2: SFF MT-RJ 10-pin transceivers
Part 3: SFF MT-RJ 20-pin transceivers
Part 4: PN 1x9 plastic optical fibre transceivers
Part 5: SC 1x9 fibre optic modules
Part 6: ATM-PON transceivers
Part 7: SFF LC 10-pin transceivers
Part 8: SFF LC 20-pin transceivers
Part 9: SFF MU duplex 10-pin transceivers
Part 10: SFF MU duplex 20-pin transceivers
Part 11: 14-pin modulator-integrated laser diode modules
__________

Endorsement notice

The text of the International Standard IEC 62148-9:2003 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 62148-9:2003
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61754-6 - Fibre optic connector interfaces EN 61754-6 1997
Part 6: Type MU connector family

1) 2)
IEC 62148-1 - Fibre optic active components and EN 62148-1 2002
devices - Package and interface
standards
Part 1: General and guidance



1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

NORME
CEI
INTERNATIONALE IEC
62148-9
INTERNATIONAL
Première édition
STANDARD
First edition
2003-02
Composants et dispositifs actifs
en fibres optiques –
Normes de boîtier et d'interface –
Partie 9:
Emetteurs-récepteurs SFF MU duplex à 10 broches
Fibre optic active components and devices –
Package and interface standards –
Part 9:
SFF MU duplex 10-pin transceivers
© IEC 2003 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
CODE PRIX
L
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

62148-9 © IEC:2003 – 3 –
CONTENTS
FOREWORD . 5
INTRODUCTION .9
1 Scope .11
2 Normative references.11
3 Definition and abbreviation .11
3.1 Definition .11
3.2 Abbreviation .11
4 Classification .11
5 Specification of the optical connector interface .13
6 Electrical interface .13
6.1 General .13
6.2 Numbering of electrical terminals.13
6.3 Electrical terminal assignment .15
7 Outline and footprint .17
7.1 Drawings of case outline.17
7.2 Optical receptacle MU duplex style .19
7.3 Drawings of case footprint .21
Figure 1 – Electrical terminal numbering assignments (viewed from above with pins
underneath) .13
Figure 2 – Case outline .19
Figure 3 – Case footprint.23
Table 1 – Transceiver receiver pin-function definitions .15
Table 2 – Transceiver transmitter pin-function definitions .15

---------------------- Page: 6 ----------------------

62148-9 © IEC:2003 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PACKAGE AND INTERFACE STANDARDS –
Part 9: SFF MU duplex 10-pin transceivers
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entruste
...