SIST EN 13445-4:2002/A5:2009

Unfired pressure vessels - Part 4: Fabrication

Unbefeuerte Druckbehälter - Teil 4: Herstellung

Recipients sous pression non soumis à la flamme - Partie 4: Fabrication

Neogrevane tlačne posode - 4. del: Proizvodnja

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-2009
• Withdrawal Date: 29-Dec-2009
• ICS: 23.020.32 - Pressure vessels
• Technical Committee: TLP - Pressure vessels
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 30-Dec-2009
• Due Date: 22-Jan-2010
• Completion Date: 30-Dec-2009
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 13445-4:2002/A5:2009 - Unfired pressure vessels - Part 4: Fabrication

Relations

• Amends: SIST EN 13445-4:2002 - Unfired pressure vessels - Part 4: Fabrication
• Effective Date: 01-Nov-2009
• Replaced By: SIST EN 13445-4:2009 - Unfired pressure vessels - Part 4: Fabrication
• Effective Date: 01-Dec-2009
• Amends: SIST EN 13445-4:2002 - Unfired pressure vessels - Part 4: Fabrication
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13445-4:2002/A5:2009
01-november-2009
1HRJUHYDQHWODþQHSRVRGHGHO3URL]YRGQMD
Unfired pressure vessels - Part 4: Fabrication
Unbefeuerte Druckbehälter - Teil 4: Herstellung
Recipients sous pression non soumis à la flamme - Partie 4: Fabrication
Ta slovenski standard je istoveten z: EN 13445-4:2002/A5:2009
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 13445-4:2002/A5:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13445-4:2002/A5:2009

---------------------- Page: 2 ----------------------

SIST EN 13445-4:2002/A5:2009
EUROPEAN STANDARD
EN 13445-4:2002/A5
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2009
ICS 23.020.30

English Version
Unfired pressure vessels - Part 4: Fabrication
Recipients sous pression non soumis à la flamme - Partie Unbefeuerte Druckbehälter - Teil 4: Herstellung
4: Fabrication
This amendment A5 modifies the European Standard EN 13445-4:2002; it was approved by CEN on 4 December 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-4:2002/A5:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13445-4:2002/A5:2009
EN 13445-4:2002/A5:2009 (E)
Contents Page
1 Modification of the text in sub-clause 8.2 .4
2 Modification of the text of clause 11.1 .5

2

---------------------- Page: 4 ----------------------

SIST EN 13445-4:2002/A5:2009
EN 13445-4:2002/A5:2009 (E)
Foreword
This document (EN 13445-4:2002/A5:2009) has been prepared by Technical Committee CEN/TC 54 “Unfired
pressure vessels”, the secretariat of which is held by BSI.
This Amendment to the European Standard EN 13445-4:2002 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by August 2009, and conflicting
national standards shall be withdrawn at the latest by August 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative Annex ZA, which is an integral part of this document.
The document includes the text of the amendment itself. The corrected pages of EN 13445-4 will be delivered
as issue 36 of the standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
...