iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN IEC 61300-3-53:2021/AC:2023

(Corrigendum)

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveguide (including fibre) (IEC 61300-3-53:2020/COR1:2023)

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveguide (including fibre) (IEC 61300-3-53:2020/COR1:2023)

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-53: Untersuchungen und Messungen - Verfahren zur Messung des winkelabhängigen begrenzten Lichtstroms (EAF) basierend auf den zweidimensionalen Fernfelddaten eines Mehrmoden-Wellenleiters (einschließlich -Faser) (IEC 61300-3-53:2020/COR1:2023)

Dispositifs d’interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 3-53 : Examens et mesures - Méthode de mesure du flux angulaire inscrit (EAF) fondée sur les données bidimensionnelles de champ lointain d’un guide d’ondes multimodal (fibre incluse) (IEC 61300-3-53:2020/COR1:2023)

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 3-53. del: Preiskave in meritve - Merilna metoda obdanega koničastega pretoka (EAF), osnovana na dvodimenzionalnih podatkih daljnega polja iz mnogorodovnega valovoda (vključno z optičnim vlaknom) - Popravek AC (IEC 61300-3-53:2020/COR1:2023)

General Information

Status
Published
Publication Date
20-Aug-2023
ICS
33.180.20 - Fibre optic interconnecting devices
Technical Committee
MOC - Mobile Communications
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-Jul-2023
Due Date
01-Oct-2023
Completion Date
21-Aug-2023
Ref Project
EN IEC 61300-3-53:2021/AC:2023-07 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveguide (including fibre)

Relations

Corrects
SIST EN IEC 61300-3-53:2021 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and Measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveguide (including fibre) (IEC 61300-3-53:2020)
Effective Date
11-Jul-2023

Buy Standard

EN IEC 61300-3-53:2021/AC:2023 - BARVEEN IEC 61300-3-53:2021/AC:2023 - BARVE
PreviousNext
Corrigendum
EN IEC 61300-3-53:2021/AC:2023 - BARVE
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61300-3-53:2021/AC:2023
01-september-2023
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 3-53. del: Preiskave in meritve - Merilna metoda obdanega koničastega
pretoka (EAF), osnovana na dvodimenzionalnih podatkih daljnega polja iz
mnogorodovnega valovoda (vključno z optičnim vlaknom) - Popravek AC (IEC
61300-3-53:2020/COR1:2023)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-53: Examinations and measurements - Encircled
angular flux (EAF) measurement method based on two-dimensional far field data from
multimode waveguide (including fibre) (IEC 61300-3-53:2020/COR1:2023)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 3-53: Untersuchungen und Messungen - Verfahren zur Messung
des winkelabhängigen begrenzten Lichtstroms (EAF) basierend auf den
zweidimensionalen Fernfelddaten eines Mehrmoden-Wellenleiters (einschließlich -Faser)
(IEC 61300-3-53:2020/COR1:2023)
Dispositifs d’interconnexion et composants passifs fibroniques - Procédures
fondamentales d'essais et de mesures - Partie 3-53 : Examens et mesures - Méthode de
mesure du flux angulaire inscrit (EAF) fondée sur les données bidimensionnelles de
champ lointain d’un guide d’ondes multimodal (fibre incluse) (IEC 61300-3-
53:2020/COR1:2023)
Ta slovenski standard je istoveten z: EN IEC 61300-3-53:2021/AC:2023-07
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61300-3-53:2021/AC:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61300-3-53:2021/AC:2023

---------------------- Page: 2 ----------------------
SIST EN IEC 61300-3-53:2021/AC:2023


EUROPEAN STANDARD EN IEC 61300-3-
53:2021/AC:2023-07
NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2023

ICS 33.180.20
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 3-53:
Examinations and measurements - Encircled angular flux (EAF)
measurement method based on two-dimensional far field data
from multimode waveguide (including fibre)
(IEC 61300-3-53:2020/COR1:2023)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-
mesures - Partie 3-5
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61300-2-38:2024(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for fibre optic sealed closures and hardened connectors using air pressure (IEC 61300-2-38:2023)
EN IEC 61300-2-38:2023

IEC 61300-2-38:2023 is available as IEC 61300-2-38:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61300-3-38:2023 presents two methods for testing the sealing performance of a fibre optic sealed closure and hardened connector using air pressure. This third edition cancels and replaces the second edition published in 2006. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of sealed hardened connectors;
b) recommended test severities from IEC 61753-1;
c) test configurations for hardened connectors and adaptors.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61753-021-02:2024(Main)
Fibre optic interconnecting devices and passive components - Performance standard - Part 021-02: Single-mode fibre optic connectors terminated as pigtails and patchcords for category C - Controlled environment (IEC 61753-021-02:2023)
EN IEC 61753-021-02:2023

IEC 61753-021-02:2023 defines the minimum initial test and measurement requirements and severities which single-mode fibre optic connectors terminated as a pigtail or a patchcord satisfy in order to be categorized as meeting the IEC standard category C (controlled environment), as defined in IEC 61753-1. If tests were performed on the connectors terminated as pigtails or patchcords for categories OP+HD, OP+, OP, OPHD, or CHD and the product passed, the product will be automatically qualified or categorized as meeting the IEC standard for category C. This first edition cancels and replaces the second edition of IEC 61753-021-2 published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61753-021-2:2007:
a) changed scope to remove restrictions on attenuation and return loss grades;
b) included provisions for rectangular ferrule connectors;
c) changed the terms and definitions of the different types of test samples (pigtail test samples and patchcord test samples) used in the various tests to avoid confusion;
d) updated fibre naming conventions according to IEC 60793-2-50 and added provisions for B-657 fibres;
e) added all the attenuation and return loss grades defined in IEC 61753-1;
f) test severities updated according to IEC 61753-1;
g) reduced flexing of strain relief cycles from 100 cycles to 50 cycles;
h) added the torsion test;
i) reduced the duration of the fibre/cable retention test on reinforced cables from 120 s to 60 s minimum;
j) removed the static side load test;
k) reduced the number of mating durability cycles from 500 cycles to 200 cycles and added provisions for rectangular ferrule connectors;
l) added Annex B for visual examination of the outer cable sheath movement of reinforced cables as an additional requirement for change of temperature, cable retention and flexing of the strain relief tests.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61753-021-06:2024(Main)
Fibre optic interconnecting devices and passive components - Performance standard - Part 021-06: Single-mode fibre optic connectors terminated as pigtails and patchcords for category OP+ - Extended outdoor protected environment (IEC 61753-021-06:2023)
EN IEC 61753-021-06:2023

IEC 61753-021-06:2023 defines the minimum initial test and measurement requirements and severities which single-mode fibre optic connectors terminated as a pigtail or a patchcord satisfy in order to be categorised as meeting the IEC standard category OP+ (extended outdoor protected environment), as defined in IEC 61753-1. If tests were performed on the connectors terminated as pigtails or patchcords for category OP+HD and the product passed, the product will be automatically qualified or categorized as meeting the IEC standard for category OP+. If tests are performed on the connectors terminated as pigtails or patchcords for category OP+, and the product passes, the product will be automatically qualified or categorized as meeting the IEC standard for categories OP and C. This first edition cancels and replaces the first edition of IEC 61753-021-6 published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61753-021-6:2007:
a) updated environmental category (from O to OP+), tests and their severities according to IEC 61753-1:2018;
b) removed the copyright notice as it is no longer needed;
c) changed title and scope to remove restrictions on attenuation and return loss grades;
d) changed the term and definitions of the different types of test samples (pigtail test samples and patchcord test samples) used in the various tests to avoid confusion;
e) removed the term and definition for small form factor (SFF) connectors as it is no longer used in the document;
f) updated fibre naming conventions according to IEC 60793-2-50: and added provisions for B-657 fibres;
g) added all the attenuation and return loss grades defined in IEC 61753-1;
h) removed the static side load test;
i) removed the need to perform all tests sequentially to align with other performance standards;
j) added provisions for rectangular ferrule connectors;
k) added Annex B for visual examination of the outer cable sheath movement of reinforced cables as an additional requirement for change of temperature, cable retention and flexing of the strain relief tests.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62148-17:2023(Main)
Fibre optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors (IEC 62148-17:2023)
EN IEC 62148-17:2023

IEC 62148-17: 2023 defines physical interface specifications for transmitter and receiver components with dual coaxial RF connectors. This second edition cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) IEC 61169-60 was added as a normative reference for SMPM connectors;
b) normative reference IEC 60874-1 (withdrawn) was replaced by IEC 61754 (all parts);
c) a reference to the terms and definitions of IEC 62007-1 was added in Clause 3;
d) a new column “Typical” was added to the tables in Figure 2 and Figure 3 to clarify the meaning of all listed values.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61300-3-45:2023(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors (IEC 61300-3-45:2023)
EN IEC 61300-3-45:2023

IEC 61300-3-45:2023 is available as IEC 61300-3-45:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 61000-3-45:2023 describes the procedure required to measure the statistical distribution and mean attenuation for random mated optical connectors with physical contact (PC) and angled physical contact (APC) polished multi-fibre rectangular ferrules as defined in the IEC 61754 series. This measurement method is applicable to cable assemblies. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of sample size for > 12-fibre connector measurement;
b) inclusion of guidance for multimode measurement.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62149-3:2023(Main)
Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems (IEC 62149-3:2023)
EN IEC 62149-3:2023

This part of IEC 62149 covers the performance specification for electroabsorption (EA) type
optical modulators monolithically integrated with laser diodes for 40 Gbit/s fibre optic
transmission systems. This document contains definitions for product performance
requirements as well as a series of tests and measurements, for which clearly defined
conditions, severities and pass/fail criteria are provided. The tests are intended to be run as an
initial design verification to prove any product's ability to satisfy this document's requirements.
This document is applicable for on-off keying modulation formats.
A product that has been shown to meet all the requirements of a performance standard can be
declared as compliant with the performance standard but will then be controlled by a quality
assurance program.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61300-2-26:2023(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist (IEC 61300-2-26:2023)
EN IEC 61300-2-26:2023

This part of IEC 61300 provides a test to determine the corrosion resistance of the metals used
in the construction of fibre optic interconnecting devices and passive components. This
document determines if dissimilar metals have been well finished to prevent corrosion. The
requirements of the tests for these devices are defined in IEC 61753-1.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50411-3-2:2023(Main)
Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-2: Single-mode mechanical fibre splice
EN 50411-3-2:2023

1.1   Product definition
This document contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements, which single mode mechanical splice needs to meet in order for it to be categorized as a European standard product.
Although, in this document, the product is qualified for EN IEC 60793 2 50 type B-652.D single mode fibres, it is also suitable for mechanical splicing of other single mode fibres with 125 µm diameter glass cladding.
1.2   Interoperability
The installed mechanical splice fits into optical fibre management system with optical splice cassettes or splice trays as defined in EN IEC 61756 1. This document specifies the following two physical interface dimensions:
—   cross sectional profile with width, height or diameter (in millimetres);
—   length (in millimetres).
1.3   Expected performance
In this document, the performance of the mechanical splice is given with identical fibres only as specified in Annex A. Losses associated with tolerances in fibre cladding diameter and mode field mismatch are not taken into account. The measured attenuation is a function of the core concentricity, cladding non-circularity and alignment capability. The optical return loss performance is a function of the index matching gel and the fibre end face preparation
1.4   Operating environment
The tests selected combined with the severities and durations are representative of an outdoor enclosed environment defined as category OP in EN IEC 61753 1. To ensure that the product can be used in outdoor closures, boxes or street cabinets for categories A, G or S (as defined in EN IEC 61753 1) the specified lower temperature is extended to −40 °C and a water immersion requirement for temporary flooding conditions has been added.
1.5   Reliability
Whilst the anticipated service life expectancy of the product in this environment is at least 20 years, compliance with this specification does not guarantee the reliability of the product. This is expected to be predicted using a recognized reliability assessment programme.
1.6   Quality assurance
Compliance with this specification does not guarantee the manufacturing consistency of the product. This is expected to be maintained using a recognized quality assurance programme.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61300-3-4:2023/AC:2023(Corrigendum)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation (IEC 61300-3-4:2023/COR1:2023)
EN IEC 61300-3-4:2023/AC:2023-07
  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63267-1:2023(Main)
Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend loss multimode fibres - Part 1: Optical interfaces for 50 um core diameter fibres - General and guidance (IEC 63267-1:2023)
EN IEC 63267-1:2023

This part of IEC 63267 covers multimode fibre optic connection interfaces. It includes references, document structure details, definitions, and standardised optical connection grades.
The grades are based on random mated connections between two optical connector populations according to prescribed characteristics including the core diameter and numerical aperture mismatches.
The document describes the rules under which an optical interface is created.
It also defines standardised test methods where appropriate.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day